ID-COOLING vs Dynatron: CPU Coolers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide compares the ID-COOLING IS-40X V3 and the Dynatron K555 for your ID-COOLING vs dynatron CPU cooler decision. Both units provide active cooling for Intel sockets. The main difference lies in their physical design and target use case. ID-COOLING offers a low-profile tower for compact cases. Dynatron provides a 2U server-grade solution. You should check the height and socket support before buying.
Key differences
| Aspect | ID-COOLING 45mm Low-Profile CPU Cooler | Dynatron 2U Active Server CPU Cooler |
|---|---|---|
| Tower Design | Low-Profile | 2U Server |
| Cooler Height | 45mm | 67.7mm |
| Heat Pipes | 4 | Aluminum (embedded) |
| Fan Size | 92mm | not listed |
| Socket Compatibility | LGA1700/1200/1151/1150/1155/1156, AM5/AM4 | LGA 115X, LGA 1200 |
Which one should you choose?
Choose ID-COOLING 45mm Low-Profile CPU Cooler if
- You need a cooler under 50mm for small form factor builds.
- You require compatibility with AMD AM5 or AM4 sockets.
Choose Dynatron 2U Active Server CPU Cooler if
- You are building in a 2U server chassis.
- You prefer a copper base with aluminum fins.
Verdict: Choose the ID-COOLING IS-40X V3 if you are building a compact desktop or HTPC and need broad socket support. Pick the Dynatron K555 if you are installing into a 2U server rack and need a robust, taller cooling solution.
ID-COOLING vs Dynatron Specs
tower design
You should look at the physical profile first. The ID-COOLING IS-40X V3 is a low-profile tower cooler. It measures only 45mm in height. This slim design fits easily into small form factor cases and HTPCs. It does not block nearby RAM slots. The Dynatron K555 is built for 2U server chassis. Its height is significantly larger to fit standard rackmount equipment. You will not be able to install the Dynatron in a standard desktop case. The ID-COOLING design offers much more flexibility for typical home builds.
heat pipes
Heat transfer relies on the number of pipes. The ID-COOLING IS-40X V3 includes four copper heat pipes. These pipes move heat from the base to the aluminum fins efficiently. The Dynatron K555 also uses aluminum heat pipes embedded in the fins. The product data confirms it has a copper base and aluminum fins with heat pipes. It does not specify the exact count of pipes. The ID-COOLING unit lists four pipes clearly, giving you a concrete number to compare against.
fan size
Airflow depends on the fan dimensions. The ID-COOLING IS-40X V3 uses a 92mm PWM fan. This size balances airflow and noise for a small cooler. It provides up to 46 CFM of air movement. The Dynatron K555 features a 2U active cooler design. The data lists the overall unit dimensions but does not state the specific fan diameter. Server coolers often use smaller, high-RPM fans. Without the exact fan size for the Dynatron, you cannot directly compare the airflow potential or noise levels.
socket compatibility
You need to ensure the cooler fits your motherboard. The ID-COOLING IS-40X V3 supports a wide range of Intel sockets. It is compatible with LGA 1700, 1200, 1151, 1150, 1155, and 1156. It also supports AMD AM5 and AM4. The Dynatron K555 supports LGA 115X and LGA 1200. This covers most recent Intel desktop processors. However, the ID-COOLING option offers broader support, including the latest LGA 1700 and AMD platforms.
system type
Your case type dictates which cooler you can use. The ID-COOLING IS-40X V3 is designed for standard desktop cases, ITX builds, and HTPCs. Its compact size allows it to fit in tight spaces. The Dynatron K555 is a 2U server cooler. It is intended for rackmount servers or specialized chassis that support 2U height. You cannot use the Dynatron in a regular desktop tower. The ID-COOLING cooler is the only practical choice for standard PC builds.
Choose the right cooler for your build
Small form factor builders needing low clearance
The ID-COOLING IS-40X V3 stands only 45mm tall. This low-profile design fits easily into small cases and HTPCs. It includes four heat pipes and a 92mm PWM fan. The fan delivers up to 46 CFM of airflow while staying under 35.2 dB. It supports Intel LGA1700 and AMD AM5 sockets for broad compatibility.
Users requiring server-grade active cooling solutions
The Dynatron K555 is built for 2U server chassis. It uses a copper base with aluminum fins and embedded heat pipes. This active cooler features a durable ball bearing for longevity. It is designed specifically for Intel LGA115X and LGA1200 sockets. Its compact 94 x 87.5 x 67.7mm size suits dense server environments.
ITX enthusiasts prioritizing RAM clearance and fit
This low-profile cooler measures just 101 x 94 x 45mm. Its slim 45mm height ensures excellent memory compatibility. You can install it even on Mini-ITX motherboards without blocking RAM slots. The included 92mm fan provides quiet operation. It fits Intel LGA1150 through LGA1700 and AMD AM4/AM5 platforms.
The products compared
ID-COOLING 45mm Low-Profile CPU Cooler
Best for: Small form factor builds with low clearance
- Socket Compatibility
- LGA1700/1200/115X, AM5/AM4
- Cooler Height
- 45mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Features
- Fan
View on Amazon: ID-COOLING 45mm Low-Profile CPU Cooler Affiliate link
This is a 45mm low-profile CPU cooler from ID-COOLING. It uses four heat pipes and a 92mm PWM fan to move heat. The fan moves 46CFM of air at a max noise level of 35.2dB. It fits Intel LGA1700, 1200, 1151, 1150, 1155, 1156 and AMD AM5, AM4 sockets. Its slim build suits HTPCs and small form factor cases.
Pros
- 45mm total height for small cases
- 4 heat pipes for heat transfer
- 92mm PWM fan for speed control
- Supports Intel LGA1700 and AMD AM5
Cons
- Limited to 46CFM airflow
- Max noise level of 35.2dB
- Only 45mm height restricts high-end CPUs
Good fit if
- You need a cooler under 50mm tall
- You build in an ITX or SFF case
- You use a mid-range CPU
Skip if
- You have a high-TDP gaming CPU
- You need a tower cooler over 150mm
- You require silent operation under 30dB
Verdict: ID-COOLING IS-40X V3 Low Profile Cooler fits users with space constraints who need basic cooling for moderate loads. It is not suitable for high-performance processors.
Dynatron 2U Active Server CPU Cooler
Best for: 2U server rack cooling
- Socket Compatibility
- LGA 115X, LGA 1200
- Server Height
- 2U
- Cooling Method
- Active
- Material
- Copper, Aluminum
- Dimensions
- 6 × 6 × 6 inches
View on Amazon: Dynatron 2U Active Server CPU Cooler Affiliate link
The Dynatron K555 is a 2U active cooler designed for server racks. It features a copper base with aluminum fins and embedded heat pipes. The unit measures 94.0 x 87.5 x 67.7mm and uses dual ball bearings. It supports LGA 115X and LGA 1200 sockets. This cooler suits users needing compact, high-density cooling for specific server builds.
Pros
- Dual ball bearing design for durability
- Copper base with aluminum fins
- Embedded heat pipes for heat transfer
- Supports LGA 115X and LGA 1200
Cons
- Limited to 2U server rack form factor
- Not suitable for standard desktop cases
- No mention of fan speed control
Good fit if
- You are building a 2U server chassis
- You need support for LGA 1200 sockets
- You require a compact active cooler
Skip if
- You are using a standard ATX case
- You need a low-profile desktop cooler
- You require silent operation without fans
Verdict: Dynatron K555 2U Server Cooler is a specialized solution for 2U server builds. It fits users who need LGA 1200 support in a dense rack environment.
Specifications side by side
| Spec | ID-COOLING 45mm Low-Profile CPU Cooler | Dynatron 2U Active Server CPU Cooler |
|---|---|---|
| Socket Compatibility | LGA1700/1200/115X, AM5/AM4 | LGA 115X, LGA 1200 |
| Cooler Height | 45mm | not stated |
| Heat Pipes | 4 | not stated |
| Tower Design | Low-Profile | not stated |
| Fan Size | 92mm | not stated |
| Server Height | not stated | 2U |
| Cooling Method | not stated | Active |
| Material | not stated | Copper, Aluminum |
| Features | Fan | not stated |
| Dimensions | 3.62 × 0.59 × 3.62 inches | 6 × 6 × 6 inches |
| Weight | 11.2 ounces | not stated |
| Size | 101x94x45mm | not stated |
| Color | black | not stated |
| Model | IS-40X | K555 |
Frequently asked questions
Which cooler is better for small form factor builds?
The ID-COOLING IS-40X V3 is the better choice for small form factor builds. It features a low-profile design that measures only 45mm in height. This slim profile allows it to fit easily into compact cases and HTPCs where space is limited. The Dynatron K555 is a 2U server cooler and is too large for standard desktop cases.
Does the ID-COOLING cooler support LGA 1200?
The product data does not explicitly list socket compatibility for the ID-COOLING IS-40X V3. However, the Dynatron K555 is confirmed to support LGA 1200. If you require guaranteed LGA 1200 support, the Dynatron unit is the specified option. You should verify the specific socket compatibility for the ID-COOLING model on the manufacturer's website before purchasing.
What is the height difference between these two coolers?
The ID-COOLING IS-40X V3 has a height of 45mm, making it a low-profile tower cooler. The Dynatron K555 is a 2U active server cooler, which is significantly taller and designed for rack environments. This height difference means the ID-COOLING unit is suitable for standard desktop cases, while the Dynatron unit is intended for specialized server racks.
How many heat pipes does the ID-COOLING cooler have?
The ID-COOLING IS-40X V3 includes four heat pipes. These pipes help transfer heat away from the CPU to the aluminum fins. The Dynatron K555 uses copper and aluminum materials for its construction but does not specify the number of heat pipes in the provided data. The ID-COOLING unit relies on these four pipes for its thermal performance.
Is the Dynatron cooler suitable for a home desktop PC?
The Dynatron K555 is designed for 2U server rack cooling. It is a specialized solution for dense rack environments and may not fit or function optimally in a standard home desktop case. The ID-COOLING IS-40X V3 is a more appropriate choice for general desktop use, particularly for users with space constraints who need basic cooling for moderate loads.
What materials are used in the Dynatron K555?
The Dynatron K555 is constructed from copper and aluminum. These materials are common in server-grade coolers for efficient heat dissipation. The ID-COOLING IS-40X V3 is described as a low-profile tower with a fan, but specific material details for its base or fins are not provided in the data. The Dynatron unit explicitly lists both copper and aluminum.
Can I use the Dynatron cooler for high-performance gaming?
The Dynatron K555 is a 2U active server cooler intended for server rack environments. It is not designed for high-performance gaming desktops. The ID-COOLING IS-40X V3 is also not suitable for high-performance processors, as it is a low-profile unit for moderate loads. Neither cooler is recommended for high-end gaming builds based on their specified use cases.
What is the weight of the ID-COOLING cooler?
The ID-COOLING IS-40X V3 weighs 11.2 ounces. This lightweight design makes it easy to install in small form factor cases. The weight of the Dynatron K555 is not provided in the data. The ID-COOLING unit includes a fan and four heat pipes, contributing to its overall mass, which is relatively light for a CPU cooler.