ID-COOLING FROZN A410 Black CPU Cooler Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ID-COOLING FROZN A410 Black provides 220W TDP heat dissipation using four direct-contact copper heat pipes and a 120mm fluid dynamic bearing PWM fan. If you are shopping for id cooling frozn a410 black CPU cooler alternatives, you may need a different form factor, extra cooling hardware, or integrated lighting for your build. The stock model stands 152mm tall with a slanted heatsink design that prevents RAM interference on Intel and AMD motherboards. However, compact small-form-factor enclosures cannot fit a 152mm tower, making low-profile coolers measuring 36mm or 70mm necessary.
You might also prefer an alternative that adds a fifth heat pipe or a dual-fan push-pull configuration for increased airflow. Other builders may want integrated ARGB motherboard lighting, which the all-black FROZN A410 omits. The 6 replacement coolers compared here were selected because their core specifications overlap directly with the baseline model. Each option targets specific system constraints, matching key attributes like socket support, heat pipe count, or direct-contact base designs while providing distinct dimensions and feature variations for your setup.
Our top pick: ID-COOLING FROZN 120mm CPU Cooler.
Comparing FROZN A410 Alternatives
ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler
The ID-COOLING SE-225-XT Black upgrades your setup with five direct-contact heat pipes and dual 120mm fans configured for push-pull airflow. The FROZN A410 relies on a single 120mm fan and four heat pipes. This dual-fan alternative moves air across the fin stack from two points, which helps accelerate heat transfer. However, its twin-fan arrangement increases total depth to 4.25 inches and height to 5.9 inches compared to the 152mm FROZN A410. You give up the slimmer single-fan footprint of the original unit. Choose this model if your chassis fits a 5.9-inch tall heatsink and you want five heat pipes with dual-fan push-pull cooling performance.
Thermalright AXP90 36mm Low-Profile Cooler
The Thermalright AXP-90 X36 Black stands at a compact 36mm height, making it drastically shorter than the 152mm FROZN A410 tower. It features four 6mm heat pipes and caps acoustic output at 22.4 dBA, running quieter than the 29.85 dBA ceiling of the FROZN A410. To achieve this ultra-low profile, it trades away the 120mm fluid dynamic bearing fan and the 220W TDP heat dissipation rating found on the larger single tower. Socket support covers AM4, AM5, LGA 1851, and older Intel sockets. Select this alternative if you are building an ITX system with severe vertical height constraints that cannot accommodate a standard desktop tower cooler.
Thermaltake UX200 SE ARGB Air Cooler
The Thermaltake UX200 SE integrates 5V motherboard ARGB lighting synchronization, providing customizable visual illumination that the solid black FROZN A410 lacks. Like the original cooler, it uses direct-contact copper heat pipes to draw thermal energy away from your processor. However, it is rated for up to 170W TDP, offering less thermal headroom than the 220W TDP capacity of the FROZN A410. It also measures taller overall, with published case dimensions listing a height of 7.3 inches. Compatibility includes modern AM5 and LGA 1851 sockets. Choose this model if your chassis has ample vertical clearance and you want motherboard-synced ARGB lighting on a processor rated at 170W or below.
Cooler Master i70C ARGB Low-Profile Cooler
The Cooler Master i70C ARGB features a low-profile 70mm height (2.76 inches) and integrated ARGB lighting, whereas the FROZN A410 is a 152mm tall, unlit tower. Its copper and aluminum build handles compact footprints where vertical space is tight. In exchange for this low clearance, thermal capacity drops to 95W TDP compared to the 220W rating of the FROZN A410. Furthermore, socket compatibility is restricted strictly to Intel LGA 1700 and LGA 1851, dropping all AMD socket support. Pick the i70C if you are assembling a compact Intel LGA 1700 or 1851 desktop with a 95W processor and want ARGB lighting in a low-clearance chassis.
ID-COOLING 120mm Black CPU Air Cooler
The ID-COOLING SE-224-XTS Black shares a similar all-black single-tower design, four direct-contact heat pipes, and full RAM clearance with the FROZN A410. It measures 5.94 inches in height and weighs one pound, fitting standard desktop chassis easily. Its 120mm fan delivers up to 70 CFM of airflow, which provides slightly less maximum air movement than the 78.25 CFM output of the FROZN A410 fan. Both units avoid memory interference across Intel and AMD motherboards. You give up a small margin of maximum fan airflow volume compared to the original model. Choose this cooler if you want a reliable four-heatpipe black tower cooler for standard Intel or AMD socket builds.
Thermalright Low Profile 36mm CPU Cooler
The Thermalright AXP90 X36 Black offers an ultra-compact 36mm vertical profile with a downward-blowing fan. It retains four heat pipes and an all-black finish similar to the FROZN A410, but directs airflow downward instead of through a 152mm tall tower. By shrinking dimensions down to 3.74 by 3.72 by 1.42 inches, it fits spaces where the FROZN A410 tower cannot mount. However, you give up the higher cooling headroom of a 220W TDP heatsink and the larger 120mm fan size. Choose this cooler if you are building an ultra-compact ITX or HTPC chassis where vertical clearance is limited to low-profile components.
Quick picks
Our 7 picks
ID-COOLING FROZN 120mm CPU Cooler
Best for: Standard desktop builds needing full RAM clearance
- Socket Compatibility
- LGA1851/1700/1200/115X, AM4/AM5
- Cooler Height
- 152mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120mm
- TDP Rating
- 220W
View on Amazon: ID-COOLING FROZN 120mm CPU Cooler Affiliate link
The ID-COOLING FROZN 120mm CPU Cooler is a single-tower air cooler rated for up to 220W TDP. It features four 6mm direct-contact copper heat pipes and a 120mm PWM fan that reaches up to 78.25 CFM of airflow with a maximum noise level of 29.85 dB(A). At 152mm tall with a slanted heatsink design for memory clearance, it suits standard tower builds where you need balanced cooling without blocking your RAM.
Pros
- 220W TDP rating with four 6mm direct-contact copper heat pipes
- Slanted heatsink prevents RAM interference even on mini-ITX motherboards
- 120mm FDB fan delivers up to 78.25 CFM of airflow
- Moderate 152mm total height fits most standard tower cases
Cons
- 152mm height does not fit ultra-compact small form factor cases
- Single-fan setup rather than dual-fan configuration
- No integrated RGB lighting hardware listed
Good fit if
- You want a 220W TDP single-tower cooler for Intel or AMD processors.
- You need guaranteed clearance for memory modules on compact or standard motherboards.
- You have a PC chassis with at least 152mm of CPU cooler clearance.
Skip if
- You need a low-profile cooler under 50mm for a slim mini-ITX enclosure.
- You prefer dual-tower or dual-fan cooling setups for higher thermal capacity.
Verdict: ID-COOLING FROZN 120mm CPU Cooler delivers 220W TDP heat dissipation with four copper heat pipes and full RAM clearance at 152mm tall. It provides a solid baseline single-tower configuration for standard desktop builds.
ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler
Best for: push-pull airflow with full RAM clearance
- Socket Compatibility
- Intel LGA1700/115X/1200 & AMD AM4/AM5
- Heat Pipes
- 5
- Fan Size
- 120mm
- TDP Rating
- 220W
- System Type
- Desktop
- Color
- Black
View on Amazon: ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler Affiliate link
This black CPU air cooler from ID-COOLING uses five direct-contact heat pipes and dual 120mm PWM fans arranged in a push-pull setup. With a maximum airflow of 76.16 CFM and a standing height of 5.9 inches, it provides substantial cooling throughput. It suits you if you run demanding desktop processors and need full RAM clearance on standard or mini-ITX motherboards.
Pros
- Five direct-contact heat pipes for heat transfer
- Dual 120mm PWM fans in push-pull configuration
- High maximum airflow rating of 76.16 CFM
- Designed for memory noninterference even on mini-ITX motherboards
Cons
- Maximum fan noise reaches 35.2 dB(A)
- Height of 5.9 inches prevents installation in compact low-profile cases
- No integrated RGB or lighting features listed
Good fit if
- You need five direct-contact heat pipes for higher heat dissipation.
- You want a dual-fan push-pull configuration with up to 76.16 CFM of airflow.
- You require tall memory clearance on standard or mini-ITX motherboards.
Skip if
- You have a slim chassis that cannot fit a 5.9-inch tall tower cooler.
- You want integrated RGB or ARGB motherboard lighting sync.
Verdict: ID-COOLING Dual-Fan 5-Heatpipe CPU Air Cooler delivers strong push-pull airflow and five direct-contact pipes while maintaining RAM clearance across modern sockets.
Thermalright AXP90 36mm Low-Profile Cooler
Best for: space-constrained ITX computer builds
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1200, 1851
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler Affiliate link
This compact unit is a low-profile CPU cooler built for tight computer builds. Measuring only 36mm in total height, it pairs four 6mm heatpipes with a 92mm slim PWM fan to fit inside small form factor cases. Operating at a maximum noise level of 22.4 dBA, it suits you if you need a quiet, space-saving cooling solution for compatible Intel or AMD ITX setups.
Pros
- Ultra-compact 36mm total height fits tight ITX cases
- Equipped with four 6mm heatpipes
- Maximum rated fan noise output of 22.4 dBA
- Includes a 92mm slim PWM fan
Cons
- Uses a smaller 92mm fan rather than a 120mm fan
- Lacks integrated ARGB or LED lighting
- Features four heatpipes compared to larger multi-pipe alternatives
Good fit if
- You need a low-profile cooler measuring 36mm in total height for an ITX case.
- You want quiet cooling with a fan rated at 22.4 dBA or lower.
- You run a supported Intel or AMD desktop socket.
Skip if
- You have space for a standard tower cooler with a larger 120mm fan.
- You want integrated lighting features on your CPU cooler.
Verdict: Thermalright 36mm Low-Profile Black Cooler delivers a 36mm profile and four 6mm heatpipes for compact systems. It provides quiet operation capped at 22.4 dBA where clearance is severely restricted.
Thermaltake UX200 SE ARGB Air Cooler
Best for: 170W CPUs needing 5V motherboard ARGB sync
- Socket Compatibility
- LGA 1851, 1700, 1200, AM4, AM5
- Heat Pipes
- 4
- TDP Rating
- 170W
- Lighting
- ARGB
- Color
- Black
- Dimensions
- 5.2 × 4.9 × 7.3 inches
View on Amazon: Thermaltake UX200 SE ARGB Air Cooler Affiliate link
The Thermaltake 4-Heatpipe ARGB CPU Cooler is an air cooler built for systems requiring standard thermal dissipation and integrated lighting. It features four 6mm direct-contact copper heat pipes, an aluminum fin heatsink, and a 170W TDP rating. The integrated fan includes 15 addressable LEDs compatible with 5V motherboard headers. This unit suits you if you need reliable cooling for mid-range Intel or AMD processors and prefer synchronized lighting inside your chassis.
Pros
- Four 6mm direct-contact U-shape copper heat pipes
- 15 addressable LEDs compatible with 5V motherboard RGB sync
- Broad socket support including Intel LGA 1851 and AMD AM5
- Nine-blade high-airflow fan design
Cons
- 170W TDP rating limits headroom on high-draw processors
- Listed height of 7.3 inches requires significant case clearance
- Full lighting control requires a compatible 5V RGB motherboard header
Good fit if
- You want 15-LED ARGB illumination managed through your motherboard software.
- You run a compatible Intel or AMD processor with a TDP of 170W or less.
- You have a PC chassis that accommodates a 7.3-inch cooler height.
Skip if
- You use a high-wattage processor requiring more than 170W thermal headroom.
- You assemble a small-form-factor build that cannot clear 7.3 inches in height.
- You lack a 5V addressable RGB header on your motherboard.
Verdict: Thermaltake 4-Heatpipe ARGB CPU Cooler provides direct-contact copper heat pipes and 5V motherboard lighting sync for chips rated up to 170W TDP. It delivers standard cooling and broad socket compatibility for cases with sufficient vertical clearance.
Cooler Master i70C ARGB Low-Profile Cooler
Best for: low-wattage Intel LGA 1700 compact systems
- Socket Compatibility
- LGA 1700, LGA 1851
- Cooler Height
- 70mm
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- TDP Rating
- 95W
- Fan Speed
- 1,800 RPM
View on Amazon: Cooler Master i70C ARGB Low-Profile Cooler Affiliate link
This top-down low-profile air cooler measures 70mm tall and targets compact chassis setups. It pairs an aluminum fin array and copper insert base with a 120mm ARGB PWM fan that reaches 1,800 RPM. Engineered strictly for Intel LGA 1700 and LGA 1851 platforms, it handles CPUs up to 95W TDP. It suits you if you need illuminated cooling for lower-wattage Intel processors inside space-constrained builds.
Pros
- Compact 70mm total cooler height
- 120mm PWM fan with speeds up to 1,800 RPM
- Integrated copper insert base for heat transfer
- Frosted blade fan with addressable RGB lighting
Cons
- Thermal dissipation capacity tops out at 95W TDP
- Mounting hardware restricted to Intel LGA 1700 and LGA 1851
- Lacks AMD socket compatibility
Good fit if
- You need a 70mm-tall cooler for an Intel LGA 1700 or 1851 motherboard.
- You run a processor rated at or below 95W TDP.
- You want addressable RGB lighting paired with a 120mm PWM fan.
Skip if
- You use an AMD processor or an older Intel socket.
- You run high-wattage processors exceeding 95W TDP.
Verdict: Cooler Master i70C ARGB Low-Profile Cooler delivers compact 70mm cooling tailored strictly to 95W Intel LGA 1700 and 1851 systems. It provides PWM airflow and ARGB lighting where vertical clearance is limited.
ID-COOLING 120mm Black CPU Air Cooler
Best for: four-heatpipe cooling with zero RAM interference
- Heat Pipes
- 4
- Fan Size
- 120mm
- Color
- Black
- Features
- Fan
- Dimensions
- 4.72 × 4.72 × 5.94 inches
- Weight
- 1 pounds
View on Amazon: ID-COOLING 120mm Black CPU Air Cooler Affiliate link
This ID-COOLING unit is a standard tower CPU air cooler equipped with four direct-contact heat pipes and a single 120mm PWM fan. It pushes up to 70 CFM of airflow with a peak noise rating of 28.9 dB(A). The heatsink features a slanted layout designed to avoid memory slot interference on compact motherboards. It suits you if you need reliable mainstream cooling for standard AMD or Intel desktop sockets without blocking RAM slots.
Pros
- Four direct-contact heat pipes for thermal transfer
- 120mm PWM fan delivers up to 70 CFM airflow
- Slanted heatsink profile prevents RAM clearance conflicts
- Compatible with Intel LGA 1700/1200/115x and AMD AM4/AM5
Cons
- Tower height of 5.94 inches prevents use in slim low-profile cases
- Includes only one fan compared to dual-fan models
- No integrated RGB lighting listed
Good fit if
- You want a tower cooler with four direct-contact heat pipes.
- You use tall memory modules or a compact mini-ITX motherboard.
- You require socket support for AMD AM4/AM5 or Intel LGA 1700.
Skip if
- You need an ultra-compact cooler for a small-form-factor case under 5.94 inches of clearance.
- You prefer dual fans or more than four heat pipes for cooling.
- You want built-in RGB illumination.
Verdict: ID-COOLING Black 120mm 4-Heatpipe CPU Cooler offers solid single-tower thermal dissipation with full RAM clearance across modern Intel and AMD platforms. Its 70 CFM fan and four direct-contact pipes make it a dependable standard tower choice.
Thermalright Low Profile 36mm CPU Cooler
Best for: ultra-compact ITX and HTPC small chassis builds
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- Fan Speed
- 2700 RPM ± 10%
- Socket Compatibility
- AM4, AM5, LGA 1851, LGA 1200, LGA 1150, LGA 1151
View on Amazon: Thermalright Low Profile 36mm CPU Cooler Affiliate link
The Thermalright Low Profile 36mm CPU Cooler is an ultra-compact air cooler built for compact systems. It features a 36mm total height, four 6mm copper heat pipes, and a downward-facing 92mm PWM fan that spins up to 2700 RPM. This layout leaves zero clearance issues for your memory modules. You will find it suits small form factor ITX motherboards and slim cases where taller tower coolers cannot fit.
Pros
- Compact 36mm overall height fits small form factor chassis
- Four 6mm copper heat pipes paired with a pure copper base
- 92mm PWM fan reaches up to 2700 RPM and 42.58 CFM airflow
- Supports Intel LGA1700, LGA1851, and AMD AM4 and AM5 sockets
Cons
- Uses a smaller 92mm fan instead of a full 120mm fan
- Produces lower airflow than standard 150mm class tower coolers
Good fit if
- You build inside a compact Mini-ITX or HTPC enclosure.
- You need low-clearance cooling that avoids blocking memory slots.
- You run an Intel LGA1700, LGA1851, or AMD AM4/AM5 processor.
Skip if
- You have space in your case for a full-size 120mm tower cooler.
- You want integrated RGB lighting on the fan or heatsink.
Verdict: Thermalright Low Profile 36mm CPU Cooler delivers functional cooling in an ultra-short package for tight ITX builds that cannot accommodate tower heatsinks. Its four heat pipes and downward-blowing fan provide dependable thermal transfer within strict height boundaries.
Specifications side by side
| Spec | ID-COOLING FROZN 120mm CPU Cooler | ID-COOLING Dual 120mm Fan 5-Heatpipe Cooler | Thermalright AXP90 36mm Low-Profile Cooler | Thermaltake UX200 SE ARGB Air Cooler | Cooler Master i70C ARGB Low-Profile Cooler | ID-COOLING 120mm Black CPU Air Cooler | Thermalright Low Profile 36mm CPU Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA1851/1700/1200/115X, AM4/AM5 | Intel LGA1700/115X/1200 & AMD AM4/AM5 | AM4, AM5, LGA1700, 115X, 1200, 1851 | LGA 1851, 1700, 1200, AM4, AM5 | LGA 1700, LGA 1851 | not stated | not stated |
| Cooler Height | 152mm | not stated | 36mm | not stated | 70mm | not stated | 36mm |
| Heat Pipes | 4 | 5 | 4 | 4 | not stated | 4 | 4 |
| Tower Design | Single-Tower | not stated | Low-Profile | not stated | Low-Profile | not stated | Low-Profile |
| Fan Size | 120mm | 120mm | 92mm | not stated | 120mm | 120mm | 92mm |
| TDP Rating | 220W | 220W | not stated | 170W | 95W | not stated | not stated |
| Fan Speed | not stated | not stated | not stated | not stated | 1,800 RPM | not stated | 2700 RPM ± 10% |
| Lighting | not stated | not stated | not stated | ARGB | ARGB | not stated | not stated |
| System Type | not stated | Desktop | ITX | not stated | not stated | not stated | not stated |
| Color | Black | Black | Black | Black | Black | Black | Black |
| Material | not stated | not stated | not stated | not stated | Copper, Aluminum | not stated | not stated |
| Features | Fan | not stated | Fan | not stated | Fan | Fan | Fan |
| Dimensions | 4.72 × 0.98 × 4.72 inches | 5 × 4.25 × 5.9 inches | 3.72 × 3.74 × 1.42 inches | 5.2 × 4.9 × 7.3 inches | 4.72 × 4.72 × 2.76 inches | 4.72 × 4.72 × 5.94 inches | 3.74 × 1.42 × 3.72 inches |
| Weight | not stated | not stated | 15.8 ounces | not stated | 14.5 ounces | 1 pounds | not stated |
| Model | FROZN A410 BLACK | not stated | AXP-90 X36 Black | CL-P105-AL12SW-A | RR-I7C7-18PA-R1 | SE-224-XTS BLACK | AXP90 X36 BLACK |
| Size | not stated | not stated | Height 36mm | AMD/Intel | 3.40 | SE-224-XTS BLACK | 36mm |
If you want liquid cooling options instead, compare id cooling frostflow x 240 snow alternatives for different radiator dimensions.
Frequently asked questions
Which alternative to the FROZN A410 fits inside a compact Mini-ITX case?
The Thermalright AXP90 X36 Black works best for compact Mini-ITX chassis. While the FROZN A410 stands 152mm tall, the AXP90 measures just 36mm in height. It features four 6mm heat pipes and keeps noise levels capped at 22.4 dBA. This gives you effective heat transfer in enclosures where standard single-tower coolers cannot clear the side panel.
What is a good ARGB alternative to the non-illuminated FROZN A410?
The Thermaltake UX200 SE ARGB serves as a lighted alternative with standard tower cooling. It pairs direct-contact copper heat pipes with integrated 5V motherboard ARGB lighting sync. This cooler accommodates processors rated up to 170W TDP across AM5 and LGA 1851 platforms. Note that you need sufficient vertical space, as its published height reaches 7.3 inches.
Can you use the Cooler Master i70C ARGB on an AMD processor?
No, you cannot use the Cooler Master i70C ARGB on AMD motherboards. Its published hardware compatibility strictly covers Intel LGA 1700 and LGA 1851 sockets. It is engineered for low-profile setups with processors rated up to 95W TDP. The unit measures 2.76 inches tall, making it considerably lower than tower coolers like the FROZN A410.
How does the ID-COOLING SE-224-XTS Black differ in airflow and memory clearance?
The ID-COOLING SE-224-XTS Black features a 120mm PWM fan rated for 70 CFM of airflow alongside four direct-contact heat pipes. Like the FROZN A410, its physical layout is designed to avoid RAM interference entirely. It stands 5.94 inches tall and weighs 1 pound, offering a dependable single-tower design for modern desktop platforms without blocking tall memory modules.
What specs matter when switching from a tower cooler to a low-profile model?
You should verify cooler height, socket compatibility, and thermal dissipation ratings. Tower coolers like the FROZN A410 dissipate up to 220W TDP, whereas compact units like the 36mm Thermalright AXP90 or 95W Cooler Master i70C handle lower heat loads. Checking cooler height ensures case clearance, while checking the manufacturer TDP rating ensures your processor remains within acceptable operating temperatures under load.
Which low-profile alternative offers wide socket compatibility across multiple generations?
The Thermalright AXP-90 X36 Black offers extensive socket compatibility across both major processor brands. It supports AMD AM4 and AM5 platforms, as well as Intel LGA 1851, LGA 1200, LGA 1150, and LGA 1151 sockets. This allows you to install four-heatpipe low-profile cooling into older desktop boards or modern ITX systems requiring a maximum cooler height of 36mm.
How do the TDP ratings of these alternatives compare to the FROZN A410?
The ID-COOLING FROZN A410 handles up to 220W TDP. If you select the Thermaltake UX200 SE ARGB, its capacity is rated up to 170W TDP. For smaller systems, the Cooler Master i70C is tailored for chips up to 95W TDP. Matching your specific CPU power consumption to these published ratings prevents thermal throttling during sustained workloads.