6 Best Alternatives to the Icepc Graphene Copper M.2 Heatsink (2026)

How each alternative compares

JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink

The JOYJOM heatsink matches the original Icepc at 0.08 inches in height and 2.76 inches in length. It shares the same 0.79-inch width. The main difference is weight. JOYJOM weighs 1.06 ounces, which is heavier than the Icepc 0.71 ounces. Both use copper and include a thermal pad. Both fit 2280 SSDs in laptops and PS5s. You get similar low-profile performance. The heavier build may feel more solid. If you need the exact same footprint but prefer a different brand, this is a direct swap. It offers the same slim profile for tight spaces without changing your installation dimensions.

Haojiaho 6mm Pure Copper M.2 2280 Heatsink

This Haojiaho option increases thickness to 6 inches in height. It keeps a similar length of 2.75 inches. The width is 21 inches. This is much thicker than the original 0.08-inch Icepc model. It uses pure copper like the original. It includes a thermal pad for secure attachment. The extra mass provides more thermal capacity. You sacrifice low-profile clearance for higher heat dissipation potential. This fits laptops and PS5s with more vertical space. Choose this if your device allows a taller heatsink. The denser copper material handles sustained loads better than the thin original. It is a premium choice for users who prioritize material conductivity over minimal height.

Haojiaho 67x18x2mm Pure Copper M.2 Heatsink

The Haojiaho 2mm model is slightly smaller than the original. It measures 2.64 inches in length and 0.71 inches in width. The height is 0.08 inches, matching the Icepc. It weighs only 0.56 ounces, lighter than the 0.71-ounce original. It uses pure copper and includes a thermal pad. It fits 2280 SSDs in laptops and PS5s. You get a more compact footprint. The reduced size may fit tighter slots. It offers passive cooling similar to the original. Pick this if you need the absolute smallest copper heatsink. It sacrifices some surface area for minimal intrusion. It is a budget-friendly option for tight spaces where every millimeter matters.

WAVLINK Copper M.2 2280 Heatsink

The WAVLINK heatsink has a unique red color compared to the original black. It uses copper and includes a thermal pad. It fits 2280 SSDs in laptops and PS5s. The weight is 4.97 ounces, significantly heavier than the original 0.71 ounces. Specific dimensions are not listed, but it is designed for low-profile use. You get a simple passive solution. The heavier build may improve heat transfer. It suits users who want a distinct look or specific brand preference. It offers comparable cooling for tight spaces. Choose this if you need a reliable copper heatsink with a different aesthetic. It provides effective passive cooling without complex installation requirements.

Easycargo 100-Piece 15mm Copper Shim Kit

The Easycargo kit is not a direct heatsink. It contains 100 copper shims. Each shim is 0.6 inches wide and 0.6 inches long. It is pure copper. You use these to fill gaps between your SSD and case or heatsink. It does not replace the original Icepc model. It is a tool for custom thermal contact. Use it if your SSD sits too far from the cooling surface. It helps bridge gaps for better heat transfer. This is for builders who need precise adjustments. It is not a standalone cooler. Choose this if you have spacing issues. It complements other cooling solutions by improving contact. It is essential for custom builds with tight clearances.

SGTKJSJS Copper M.2 2280 Laptop Heatsink

The SGTKJSJS heatsink is larger than the original. It measures 3 inches in length and 0.87 inches in width. The height is not specified, but it is thin. It weighs 2.89 ounces, heavier than the original 0.71 ounces. It uses copper and includes a thermal pad. It fits 2280 SSDs in laptops. You get a larger surface area for heat dissipation. The extra size may not fit all tight spaces. It offers passive cooling for low-profile needs. Pick this if your laptop has slightly more room. It provides better cooling than the smaller original. It is a practical choice for users who prioritize surface area over minimal footprint. It suits those needing reliable passive cooling in constrained environments.

Quick picks

Our 7 picks

1 Best overall

Icepc Graphene Copper M.2 Heatsink

Best for: Low-profile 2280 SSD cooling in laptops and PS5s

Material

Copper with Graphene Coating

Compatible Device

M.2 2280 SSD, Laptop PC

Dimensions

70x20x2mm

Mounting Type

Silicone Thermal Pad

Weight

0.71 ounces

View on Amazon: Icepc Graphene Copper M.2 Heatsink Affiliate link

This Icepc heatsink uses pure copper with a graphene coating to improve heat transfer. The graphene layer claims high thermal conductivity for faster cooling. It measures 70x20x2mm and includes a silicone thermal pad for easy installation. The design features slanted slots for better airflow and aesthetics. It fits 2280 M.2 NVMe SSDs in laptops and PS5 consoles.

Pros

• Pure copper base with graphene coating
• Includes silicone thermal pad
• Fits 2280 M.2 NVMe SSDs
• Slanted slot design for airflow

Cons

• Very low profile at 2mm height
• Limited to 2280 size format
• No mention of mounting screws

Good fit if

• You need a low-profile cooler for a laptop
• You want graphene-enhanced copper cooling
• You have a PS5 or narrow space

Skip if

• You require a taller heatsink for better cooling
• You use non-2280 M.2 SSDs
• You prefer aluminum over copper

Verdict: Icepc Graphene Copper M.2 Heatsink offers a compact, graphene-cooled solution for 2280 SSDs in tight spaces like laptops and PS5s. It suits users prioritizing low profile and graphene-enhanced thermal performance.

2 Best budget

JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink

Best for: Laptops with tight clearance for 2280 SSDs

Material

Pure Copper

Compatible Device

M.2 2280 SSD, Laptop, PS5

Dimensions

70x20x2mm

Features

Thermal Pad

Weight

1.06 ounces

View on Amazon: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink Affiliate link

This JOYJOM heatsink uses pure copper for high thermal conductivity, rated at 401 W/mK. The surface is covered in graphite to enhance heat dissipation. It measures 70x20x2mm and fits standard 2280 M.2 SSDs in laptops and PS5 consoles. The package includes a silicone thermal pad and mounting bands. It aims to reduce SSD temperatures by 10°C to 30°C depending on your environment.

Pros

• Pure copper construction with 401 W/mK conductivity
• Graphite coating increases heat dissipation area
• Includes silicone thermal pad and mounting bands
• Compact 2mm height fits tight laptop spaces

Cons

• 2mm thickness may not fit all desktop cases
• Cooling effect varies by environment
• Black graphite finish may reveal red copper

Good fit if

• You need a low-profile heatsink for a laptop
• You want pure copper for better heat transfer
• You use a PS5 or desktop with space for 2mm height

Skip if

• You require a heatsink taller than 2mm
• You prefer aluminum over copper
• You need a heatsink for M.2 sizes other than 2280

Verdict: JOYJOM 70x20x2mm Graphite Copper M.2 Heatsink offers high conductivity for tight laptop spaces. It suits users needing a slim, pure copper solution for 2280 SSDs.

3 Also great

Haojiaho 6mm Pure Copper M.2 2280 Heatsink

Best for: PS5 and Switch M.2 expansion with pure copper

Material

Pure copper

Compatible Device

M.2 2280 SSD, PS5, Nintendo Switch

Dimensions

70 x 21 x 6 mm

Features

Thermal Pad

Weight

1.64 ounces

View on Amazon: Haojiaho 6mm Pure Copper M.2 2280 Heatsink Affiliate link

This Haojiaho heatsink uses pure copper to dissipate heat from M.2 2280 SSDs. Its dimensions are 70 x 21 x 6 mm. The package includes a silicone thermal pad to improve contact between the drive and the sink. It fits laptops, PS5 consoles, and Nintendo Switch devices. You get a cooling effect of 5°C to 20°C depending on your environment. This solid copper block is a practical option for managing heat in compact spaces.

Pros

• Constructed from 100% pure copper for efficient thermal conductivity
• Includes a low-viscosity silicone thermal pad for better heat transfer
• Compatible with M.2 2280 SSDs, PS5, and Nintendo Switch
• Grooved design increases the surface area for faster heat release

Cons

• The 6 mm thickness may not fit in very tight laptop compartments
• The listed width is 21 inches, which is likely a data error for 21 mm
• Does not mention a mounting screw kit or adhesive tape

Good fit if

• You need a heatsink that fits PS5 or Switch expansion slots
• You want pure copper construction for maximum heat dissipation
• You prefer a kit that includes a thermal pad for installation

Skip if

• You have a laptop with extremely low clearance below the M.2 slot
• You are looking for an aluminum alloy heatsink to save weight
• You need a heatsink specifically designed for desktop desktop motherboards with wide spacing

Verdict: Haojiaho 70x21x6mm Pure Copper Heatsink is a dense copper solution for users with PS5 or Switch devices who need a 6 mm thick sink. It fits those who prioritize material conductivity over slim profiles.

4 Also great

Haojiaho 67x18x2mm Pure Copper M.2 Heatsink

Best for: tight spaces and passive M.2 cooling

Socket Compatibility

M.2 2280 SSD

Material

Pure Copper

Dimensions

67x18x2mm

Compatible Device

Laptop, PS5, M.2 SSD

Features

Thermal Pad

Weight

0.56 ounces

View on Amazon: Haojiaho 67x18x2mm Pure Copper M.2 Heatsink Affiliate link

This Haojiaho heatsink uses 100% pure copper for efficient heat dissipation. It measures 67x18x2mm, making it thin enough for tight spaces. The kit includes a silicone thermal pad to improve contact between the SSD and the cooler. It fits M.2 2280 SSDs, PS5 consoles, and other devices. You get reliable cooling performance without bulk.

Pros

• 100% pure copper material for high thermal conductivity
• Ultra-thin 2mm design fits tight spaces
• Includes silicone thermal pad for better heat transfer
• Compatible with M.2 2280 SSDs and PS5

Cons

• Small 67x18mm surface area limits cooling capacity
• No adjustable fan or active cooling mechanism
• Limited to passive heat dissipation only

Good fit if

• You need a thin heatsink for tight PC cases
• You want pure copper for better heat transfer
• You are cooling an M.2 2280 SSD or PS5

Skip if

• You require active cooling with a fan
• You need a larger heatsink for high-end gaming SSDs
• You want a heatsink with adjustable height settings

Verdict: Haojiaho 2mm Pure Copper M.2 Heatsink is a compact passive cooler for users with limited space. It suits those who need a thin, copper-based solution for M.2 2280 SSDs or PS5 consoles.

5 Also great

WAVLINK Copper M.2 2280 Heatsink

Best for: Low-profile cooling for 2280 SSDs in tight spaces

Material

100% copper

Mounting Type

rubber ring

Compatible Device

Laptop, PS5

Features

Thermal Pad

Weight

4.97 ounces

View on Amazon: WAVLINK Copper M.2 2280 Heatsink Affiliate link

This WAVLINK heatsink is made from 100% copper and uses a rubber ring for mounting. It fits M.2 2280 SSDs in laptops, PCs, and consoles like the PS5. The design has a minimum height of 1.5mm, making it suitable for tight spaces. It includes thermal pads in 0.5mm and 1mm thicknesses to handle uneven surfaces. You get a cooling effect of 10-20°C depending on your environment.

Pros

• Constructed from 100% copper for efficient heat dissipation
• Low profile design with a minimum installation height of 1.5mm
• Includes both 0.5mm and 1mm silicone thermal pads
• Compatible with M.2 2280 SSDs in laptops and consoles

Cons

• Uses a rubber ring mount which may feel less secure than screws
• Limited to M.2 2280 size SSDs only
• No mention of specific airflow design or fins

Good fit if

• You need a low-profile solution for a laptop or PS5
• You require thermal pads of varying thicknesses for uneven surfaces
• You prefer a simple rubber ring installation method

Skip if

• You need a heatsink for M.2 2242 or 2260 SSDs
• You require a screw-mounted heatsink for maximum stability
• You are looking for an active cooling fan solution

Verdict: WAVLINK Copper M.2 Heatsink with Rubber Ring is a practical choice for users with limited vertical space who need a simple, passive cooling solution for 2280 SSDs in laptops or consoles.

6 Best premium

Easycargo 100-Piece 15mm Copper Shim Kit

Best for: Custom gap filling for M.2 SSDs and GPUs

Material

Copper C1100

Compatible Device

PC, Laptop GPU, CPU, M.2 NVMe SSD

Length

0.6 inches

Width

0.6 inches

View on Amazon: Easycargo 100-Piece 15mm Copper Shim Kit Affiliate link

This kit provides 100 copper shim pads in 12 thicknesses for gap-filling cooling applications. Made from pure Copper C1100, these 15mm x 15mm plates offer high thermal conductivity of 401W/mK. You can use them to bridge gaps between heat sources and sinks on M.2 NVMe SSDs, GPUs, or VRAM. The set includes options with or without adhesive backing for flexible installation.

Pros

• Pure Copper C1100 material for 401W/mK conductivity
• Includes 100 pads across 12 thicknesses (0.1mm to 2mm)
• Available in both adhesive and non-adhesive styles
• Standard 15mm x 15mm size fits many components

Cons

• Requires manual cutting to fit non-standard M.2 heatsink footprints
• Not a pre-formed heatsink; only fills thermal gaps
• Thinner pads may compress under pressure, reducing effectiveness

Good fit if

• You need to fill specific gaps between an SSD and a heatsink
• You want to customize thermal contact thickness for your build
• You are cooling VRAM or VRM components on a GPU

Skip if

• You need a complete heatsink solution without additional mounting hardware
• You prefer pre-cut pads that match standard M.2 dimensions exactly
• You are looking for a passive cooling block rather than a shim

Verdict: Easycargo 15mm Pure Copper Thermal Shim Kit is a practical tool for customizing thermal contact in tight spaces. It suits builders who need precise gap filling for M.2 SSDs or GPU components rather than those seeking a standalone cooling tower.

7

SGTKJSJS Copper M.2 2280 Laptop Heatsink

Best for: Laptops with tight SSD clearance

Material

100% copper

Compatible Device

M.2 2280 SSD

Mounting Type

Rubber ring, insulation sticker

Features

Thermal Pad

Length

3 inches

Width

0.87 inches

View on Amazon: SGTKJSJS Copper M.2 2280 Laptop Heatsink Affiliate link

This SGTKJSJS heatsink is made of 100% copper and fits standard M.2 2280 SSDs. It requires a minimum installation height of just 1.5mm, making it suitable for tight laptop spaces. The kit includes two silicone thermal pads in 0.5mm and 1mm thicknesses to handle uneven surfaces. It uses rubber rings or insulation stickers for mounting. You get a claimed cooling effect of 10-20°C to prevent throttling.

Pros

• Constructed from 100% pure copper
• Ultra-thin 1.5mm minimum height requirement
• Includes 0.5mm and 1mm silicone thermal pads
• Fits M.2 2280 SSDs in laptops and desktops

Cons

• Claims a 10-20°C cooling effect that varies by environment
• Uses basic rubber ring and sticker mounting instead of screws
• No fan included for active cooling

Good fit if

• You need a heatsink for a laptop with limited clearance
• You have uneven SSD surfaces requiring variable pad thickness
• You want a passive copper solution for an M.2 2280 drive

Skip if

• You require active cooling with a built-in fan
• You need a heatsink for M.2 2230 or 2242 SSDs
• You prefer screw-mounting hardware over adhesive or rubber rings

Verdict: SGTKJSJS 2280 Copper Heatsink is a thin, passive cooling option for users who must fit a heatsink into a laptop with very low internal clearance. It works best for those prioritizing low profile over active airflow.

Specifications side by side

Frequently asked questions

See also

• xiaobi m 2 nvme SSD alternatives
• voigtlander voigtlander m 50mm f 1 2 alternatives