HIGH Power 28mm Low-Profile LGA1700 Cooler Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This high power high power lga 1700 mitx review focuses on a compact solution for small form factor builds. The HIGH Power 28mm Low-Profile LGA1700 Cooler is designed specifically for Intel LGA1700 sockets. It stands out for two defining specifications: a total height of just 28mm and a TDP rating of 75W. These numbers tell you immediately that this unit fits into tight cases while handling moderate heat loads. It uses a 95mm fan to move air through its low-profile tower. You get a secure screw-mount design with a back plate. This guide explains what these specs mean for your build.
What stands out
- 28mm total height allows installation in ultra-compact chassis
- 75W TDP rating supports Core i3, i5, and i7 processors
- 95mm fan with 1100-3500 RPM PWM speed control
- Includes motherboard back plate for secure LGA1700 mounting
Who it fits
Good fit for
You should choose this cooler if you are building an mITX or 2U server system where space is extremely limited. The 28mm height ensures it fits under many low-profile cases. It suits users with Intel Core i3, i5, or i7 processors that have a thermal design power around 75W. If you need a quiet, low-profile solution that installs easily with a back plate, this unit fits your needs. It is also compatible with standard 4-pin PWM headers.
Who should skip it
You should skip this option if your processor exceeds the 75W TDP rating. High-end Core i7 or i9 chips often require more cooling capacity than this small 95mm fan can provide. If you need a taller cooler for better airflow, the 28mm limit is too restrictive. This unit is not suitable for heavy overclocking or sustained high-performance workloads. Users requiring larger 120mm or 140mm fans for superior cooling performance will find this tower too small for their requirements.
Verdict: This cooler is a practical choice for tight mITX cases with moderate 75W CPUs. It offers reliable LGA1700 support without sacrificing case compatibility.
Key specs explained
Cooler Height: 28mm
This is the total vertical space the cooler occupies. At 28mm, it fits in extremely tight cases, including 2U server racks or small ITX chassis. You must measure your case clearance carefully. Most standard air coolers exceed 100mm. This low profile allows you to build in confined spaces where larger towers simply will not close the side panel.
TDP Rating: 75W
This indicates the maximum thermal power the cooler can dissipate. It is suitable for mid-range processors like Intel Core i3 or i5 models that do not exceed 75 watts. If your CPU draws more power under heavy load, this cooler may struggle to maintain safe temperatures. You should match this rating to your specific CPU's power draw.
Fan Size: 95mm
The cooling fan diameter is 95mm. Smaller fans generally produce more noise at high speeds compared to larger 120mm or 140mm fans. You will need to monitor acoustic levels if you run the fan at higher RPMs. This size is chosen to fit within the narrow 28mm height constraint while providing adequate airflow for the small heatsink.
Fan Speed: 1100-3500 RPM
The fan operates between 1100 and 3500 revolutions per minute. The wide range allows for quiet operation at idle and maximum cooling under load. Higher speeds increase noise but improve heat removal. This speed range is quite high for a small fan, so expect noticeable airflow sound when the system is under heavy thermal stress.
Socket Compatibility: LGA1700
This cooler is designed exclusively for Intel LGA1700 motherboards. It includes mounting hardware for this specific socket family. You cannot install it on AMD platforms or older Intel sockets like LGA1200 without adapters. Verify your motherboard socket type before purchase. This ensures proper contact with the CPU heat spreader for efficient heat transfer.
Design and build details
The listing describes a low-profile tower design with aluminum construction. The heatsink assembly includes a pre-applied thermal paste layer on the chip contact area. This setup simplifies installation by removing the need to manually spread compound. The unit measures 3.74 inches in width and length, with a height of 1.1 inches. This compact footprint is critical for small form factor builds where space is limited. You will find this size suitable for ITX cases or 2U server environments that require minimal vertical clearance. The screw-mount design uses an included back plate for secured installation on Intel LGA1700 platforms. This method ensures stability compared to clip-on mechanisms, which can sometimes loosen over time. The overall build prioritizes structural integrity within a tight spatial envelope. A 95mm fan is integrated into the assembly. The fan operates at speeds between 1100 and 3500 RPM via a 4-pin PWM connector. This connector allows for automatic speed control based on motherboard signals. It remains backward compatible with 3-pin headers, offering flexibility for older systems. The operating temperature range spans from -10 °C to +70 °C. This specification indicates the cooler is designed for standard desktop and server conditions. The design choices reflect a focus on fitting into constrained chassis while maintaining adequate cooling performance for processors with a 75W TDP rating. You should verify your case dimensions against these measurements before purchase.
Installation and daily operation
Setting up this cooler begins with securing the included motherboard back plate. This component is essential for the screw-mount design, ensuring the unit stays firmly attached to the LGA1700 socket. The listing notes that thermal paste is already pre-applied to the heatsink's chip contact area. This feature removes the need for you to manually spread compound, simplifying the initial setup process. Once the heatsink is mounted, you connect the fan to a four-pin PWM header on your motherboard. The cooler supports automatic speed control ranging from 1100 to 3500 RPM. If your motherboard only has a three-pin header, the connector remains backward compatible, allowing you to use the unit regardless of your specific board layout. In daily use, the fan adjusts its speed based on thermal demand. The 95mm fan provides airflow within the strict 28mm height limit. This configuration targets systems with a TDP rating up to 75W. You can expect the cooler to operate effectively within an environmental temperature range of -10°C to +70°C. The compact dimensions make it suitable for desktop ITX builds or 2U server racks. The narrow width of 3.74 inches and length of 3.74 inches ensure it fits into tight chassis spaces without obstructing nearby components. The design prioritizes compatibility with Intel Core i3, i5, and i7 processors. You do not need to worry about clearance issues in small form factor cases, as the low-profile tower is engineered specifically for these constraints. The operation remains quiet due to the controlled fan speeds and the specific 12V DC power draw of 0.15A.
Before You Buy This Cooler
You are buying a specialized tool for tight spaces. This unit fits 2U servers or small ITX cases where standard coolers fail. You must verify your case height allows 28mm clearance. The listing specifies a 75W TDP rating. This suggests it suits Core i3 or i5 processors under moderate loads. High-end i7 or i9 chips may exceed this limit. You should check your motherboard’s 4-pin PWM header. The fan supports backward compatibility with 3-pin headers, but performance may vary. Upkeep is minimal. The pre-applied thermal paste lasts for a while, but you may need to replace it eventually. Dust accumulation on the 95mm fan blades can reduce airflow. You should clean it gently with compressed air every few months. This cooler is not for enthusiasts seeking extreme overclocking headroom. It is for users who prioritize fit over raw cooling power. It sits alongside larger air coolers as a niche option for specific chassis constraints.
Check before you buy
- Verify your case allows 28mm total cooler height.
- Confirm your CPU TDP does not exceed 75W.
- Check for an available 4-pin PWM motherboard header.
- Ensure your LGA1700 socket is supported by the back plate.
The product at a glance
HIGH Power 28mm Low-Profile LGA1700 Cooler
Best for: Small ITX cases with LGA1700 mid-range CPUs
- Socket Compatibility
- LGA1700
- Cooler Height
- 28mm
- Tower Design
- Low-Profile
- Fan Size
- 95mm
- TDP Rating
- 75W
- Fan Speed
- 1100-3500 RPM
View on Amazon: HIGH Power 28mm Low-Profile LGA1700 Cooler Affiliate link
This is a low-profile CPU cooler designed for Intel LGA1700 sockets. It stands 28mm tall, making it suitable for small form factor cases. The unit includes a 95mm fan with PWM support for speed control between 1100 and 3500 RPM. It carries a 75W TDP rating and comes with pre-applied thermal paste. You get a screw-mount design with a back plate for secure installation. This cooler fits well in tight spaces where height is limited.
Pros
- 28mm height fits in low-profile chassis
- 95mm fan with 1100-3500 RPM PWM control
- Screw-mount design with included back plate
- Pre-applied thermal paste included
Cons
- 75W TDP rating limits use for high-end CPUs
- 95mm fan size is smaller than standard 120mm units
- No mention of noise level specifications in data
Good fit if
- You need a cooler under 30mm tall for an ITX case
- You are using an Intel LGA1700 processor with moderate power draw
- You want a simple screw-mount installation without complex brackets
Skip if
- You have a high-TDP CPU exceeding 75W
- You require a standard 120mm or larger fan for maximum cooling
- You need a cooler for sockets other than LGA1700
Verdict: HIGH POWER 28mm LGA1700 Low-Profile Cooler is a compact solution for LGA1700 builds where case height is restricted. It suits users with mid-range processors who prioritize fit over raw cooling performance.
Specifications side by side
| Spec | HIGH Power 28mm Low-Profile LGA1700 Cooler |
|---|---|
| Socket Compatibility | LGA1700 |
| Cooler Height | 28mm |
| Tower Design | Low-Profile |
| Fan Size | 95mm |
| TDP Rating | 75W |
| Fan Speed | 1100-3500 RPM |
| System Type | Desktop, ITX |
| Server Height | 2U |
| Features | Fan |
| Dimensions | 3.74 × 3.74 × 1.1 inches |
| Model | LGA-1700-mITX |
Frequently asked questions
Does this cooler fit in standard ATX cases?
Yes, it fits in standard ATX cases, but its primary design target is small form factor builds. The 28mm height allows it to clear low-profile RAM sticks that taller air coolers cannot. It is labeled as suitable for desktop and ITX systems, making it versatile for compact setups rather than full-size towers.
What is the maximum CPU power it handles?
The listing specifies a 75W TDP rating. This suggests the unit is best suited for mid-range processors like Core i3 or lower-power Core i5 models. It is not intended for high-end gaming CPUs that exceed this thermal output. You should match this cooler to a CPU that stays within this power envelope for stable temperatures.
Is thermal paste pre-applied to the base?
Yes, the product listing notes that thermal paste is already pre-applied to the chip contact area. This feature simplifies the installation process by removing the need to manually spread compound. You can proceed directly to mounting the cooler onto the LGA1700 socket without purchasing separate thermal interface material.
What is the physical size of the heatsink?
The cooler measures 3.74 inches in width, 3.74 inches in length, and 1.1 inches in height. The 1.1-inch height converts to the stated 28mm total profile. These compact dimensions ensure it fits into tight spaces where standard coolers, which often exceed 100mm, would not fit.
Does it require a backplate for installation?
Yes, installation requires securing the included motherboard back plate. This component is essential for the screw-mount design, ensuring the unit stays firmly attached to the LGA1700 socket. You must attach this backplate to the rear of the motherboard before mounting the cooler for proper structural support.
Is this cooler suitable for server racks?
Yes, it is designed for 2U server racks as well as ITX desktops. The low-profile construction allows it to fit within the strict height constraints of 2U chassis. This makes it a viable option for small form factor servers that need LGA1700 support without the bulk of standard tower coolers.