Haojiaho Raspberry Pi 4B Pure Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This haojiaho raspberry pi 4b heatsink review focuses on a passive cooling solution built for the Raspberry Pi 4B. The unit is constructed from pure copper, a material chosen for its superior thermal conductivity compared to aluminum alloys. It weighs just 0.71 ounces, making it a lightweight addition to your project. The kit includes thermal conductive adhesive tape for mounting. This design eliminates moving parts, ensuring quiet operation without the noise of fans. You get a straightforward, spec-driven approach to keeping your single-board computer cool.
What stands out
- Made from 100% pure copper for efficient heat dissipation
- Passive design ensures zero operating noise
- Includes thermal conductive adhesive tape for easy installation
- Specifically sized to fit the Raspberry Pi 4B
Who it fits
Good fit for
This heatsink suits users who prioritize silent operation and low maintenance. If you run your Raspberry Pi 4B in a quiet workspace or bedroom, the passive copper design prevents fan noise from becoming a distraction. It is also ideal for compact setups where adding a fan is not feasible. The adhesive mounting method works well for permanent installations where you do not need to frequently remove the cooler. You get reliable cooling without complex wiring or power requirements.
Who should skip it
You should look at another option if your Raspberry Pi 4B runs under sustained, heavy loads. Passive copper cooling relies on ambient air flow, which may not be sufficient for intensive tasks like video encoding or heavy compilation. If your case has poor ventilation, this heatsink might not keep temperatures low enough. Additionally, if you prefer screw-mounted coolers for easier removal or upgrades, the adhesive tape mounting type may not suit your needs. Active cooling with a fan would be more appropriate for high-performance builds.
Verdict: This pure copper passive heatsink offers a quiet, simple cooling solution for the Raspberry Pi 4B. It is best for light to moderate workloads in well-ventilated spaces.
Key specs explained
Material: Pure copper
This heatsink uses 100% pure copper rather than aluminum. Copper conducts heat away from the processor much faster than standard aluminum alloys. You get better passive cooling performance. This matters if you run your Raspberry Pi 4B with heavy loads. It keeps the chip cooler without needing a fan. Compare this to aluminum options when shopping for better thermal transfer.
Mounting Type: Adhesive tape
The unit attaches using thermal conductive adhesive tape. You simply peel and stick it to the chip. There are no screws or clips. This makes installation very quick. It is ideal for users who want a clean look. It also avoids drilling holes in your case. Compare this to screw-mounted coolers if you need removable hardware.
Compatible Device: Raspberry Pi 4B
This heatsink is designed specifically for the Raspberry Pi 4B. It fits the board dimensions perfectly. You do not need adapters or extra parts. It ensures full coverage of the main processor. Using it on other models may not work. Check your board version before buying. Compare this to universal coolers if you switch devices often.
Weight: 0.71 ounces
The unit weighs only 0.71 ounces. It is very light for a copper part. This reduces stress on the board. It is easy to handle during setup. The low weight does not hurt cooling. It stays secure with the adhesive tape. Compare this to heavy metal blocks if you worry about board strain.
Design and Build Details
According to the listing, this heatsink is constructed entirely from pure copper. Copper offers higher thermal conductivity than aluminum alloys, which helps move heat away from the processor more efficiently. The design includes a grooved surface to increase the total heat dissipation area. This allows accumulated heat to release into the surrounding air faster without active fans.
The unit weighs 0.71 ounces and uses an adhesive tape mounting type. It comes with thermal conductive adhesive tape for installation. You simply paste the heatsink onto the device. This passive approach means there is no operating noise, which helps you maintain concentration during work. It is specifically designed to fit the Raspberry Pi 4B perfectly.
The finish is the natural copper color, identified by the model CMP. This simple, solid build focuses on direct contact cooling. You do not need screws or complex brackets. The lightweight design ensures it does not add significant bulk to your setup. If you need silent, reliable cooling for your Raspberry Pi 4B, this copper construction provides a straightforward solution based on material properties and direct adhesion.
Setup and everyday use guide
Installation relies on adhesive tape rather than screws or clips. The listing states the unit comes with thermal conductive adhesive tape. You simply paste the heatsink onto the device. If the thermal pad is not pre-attached, you must peel off the protective film from both sides of the pad before installation. This method requires a clean surface and steady hands. The heatsink is specifically designed for the Raspberry Pi 4B. It fits that board perfectly. It does not fit other models. The weight is 0.71 ounces. This light mass means it adds negligible load to your board. Daily use involves passive cooling. There are no fans or moving parts. You will hear no operating noise from the cooler itself. This allows you to work without disturbing your concentration. The grooved design increases the heat dissipation area. Accumulated heat releases into the air faster than on a flat surface. Copper conducts heat more efficiently than aluminum alloys. This helps manage temperatures during sustained workloads. You do not need to configure software or drivers. The setup is purely physical. Once adhered, the heatsink stays in place. You can install it in a case or open frame. The pure copper material ensures consistent performance over time. No maintenance is required for the heatsink itself. Just ensure the adhesive remains secure. The product includes a satisfaction guarantee for issues like damage or missing items. You can contact the seller for a replacement or refund if problems arise. This is a straightforward, silent cooling solution for your Pi.
Before you buy this passive copper heatsink
You should verify your Raspberry Pi 4B model before purchasing. This heatsink is designed specifically for that board. Do not assume it fits older versions. You must also check if your case allows passive cooling. Without airflow, the copper may not shed heat fast enough. Keep the adhesive surface clean during installation. Dust can reduce thermal transfer over time. Wipe the chip gently with isopropyl alcohol if needed. This kit sits alongside active air coolers in our guide. Choose this if you want silent operation. Pick a fan-based cooler if your workload is heavy. Passive solutions save power but rely on ambient air. Ensure your environment is not too hot. The pure copper mass helps, but it still needs room to breathe. You get quiet performance without moving parts. Just remember that passive cooling has limits. Check your thermal paste application too. A thin, even layer matters more than the heatsink itself. This option suits light tasks or quiet setups.
Check before you buy
- Confirm your device is a Raspberry Pi 4B.
- Check if your case allows passive airflow.
- Ensure the adhesive surface is clean before applying.
- Verify ambient room temperature is not too high.
The product at a glance
Haojiaho Raspberry Pi 4B Pure Copper Heatsink
Best for: silent passive cooling for Raspberry Pi 4B
- Material
- Pure copper
- Compatible Device
- Raspberry Pi 4B
- Mounting Type
- Adhesive tape
- Features
- Thermal Tape
- Weight
- 0.71 ounces
View on Amazon: Haojiaho Raspberry Pi 4B Pure Copper Heatsink Affiliate link
This Haojiaho heatsink uses 100% pure copper to cool your Raspberry Pi 4B. The material conducts heat better than aluminum, and the grooved design increases the surface area for faster dissipation. It weighs 0.71 ounces and mounts via adhesive tape. You get quiet operation without fan noise. It suits users who want passive cooling for their single-board computer.
Pros
- 100% pure copper material for efficient thermal conductivity
- Grooved design increases heat dissipation area
- Quiet passive operation with no moving parts
- Includes thermal conductive adhesive tape for easy installation
Cons
- Adhesive mounting may not suit all cases
- No included fan for active cooling
- Small size limits heat capacity under heavy load
Good fit if
- You need silent cooling for your Raspberry Pi 4B
- You prefer passive heat dissipation over fans
- You want a lightweight copper heatsink
Skip if
- You require active fan cooling
- You need a larger heatsink for extreme loads
- You prefer aluminum over copper material
Verdict: Haojiaho Pure Copper Raspberry Pi 4B Heatsink is a solid passive cooling option for users who value silence and copper's thermal properties. It fits Raspberry Pi 4B owners who do not need active fans.
Specifications side by side
| Spec | Haojiaho Raspberry Pi 4B Pure Copper Heatsink |
|---|---|
| Material | Pure copper |
| Compatible Device | Raspberry Pi 4B |
| Mounting Type | Adhesive tape |
| Features | Thermal Tape |
| Weight | 0.71 ounces |
| Color | Copper |
| Model | CMP |
Frequently asked questions
Does this heatsink require a fan for operation?
No, it is a passive cooling solution. The product is designed to dissipate heat without any moving parts or active airflow. You get silent operation because there is no fan noise. This makes it ideal for environments where quiet performance is a priority. You simply attach it to the board and rely on the copper to manage temperatures.
Is the heatsink made of aluminum or copper?
It is made of pure copper. The listing specifies the material as copper, which offers higher thermal conductivity than aluminum alloys. This allows for more efficient heat transfer away from the processor. You benefit from better passive cooling performance due to the material choice. The color is also listed as copper, confirming the composition.
How do you install the Haojiaho heatsink?
Installation uses adhesive thermal tape. The unit comes with thermal conductive adhesive tape for mounting. You peel the backing and press the heatsink onto the Raspberry Pi 4B processor. No screws or clips are required for attachment. This method provides a simple setup process for users who want a straightforward installation without additional hardware.
What is the weight of this copper heatsink?
The heatsink weighs 0.71 ounces. This light weight makes it easy to handle during installation. It adds minimal mass to your Raspberry Pi 4B setup. You do not need to worry about the added weight affecting the board's stability. The compact and light design fits well with standard passive cooling configurations.
Is this heatsink compatible with Raspberry Pi 3?
The product is listed as compatible with Raspberry Pi devices, specifically noted for the Pi 4B. You should verify the exact model compatibility before purchasing. The design targets the Pi 4B form factor. Assuming it fits older versions may lead to issues. Check the dimensions against your specific board to ensure a proper fit.
Does the heatsink include thermal paste?
The listing mentions thermal tape as a feature. It includes thermal conductive adhesive tape for mounting. You do not need to apply separate paste if the tape provides sufficient thermal transfer. The tape serves as the interface between the heatsink and the processor. This simplifies the setup by combining mounting and thermal conduction in one step.