Haojiaho Copper M.2 2280 SSD or Haojiaho Copper HeatSink 1.57x1.57x0.24 inches? Which Haojiaho Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the haojiaho m 2 2280 SSD heatsink vs copper heatsink 1 57x1 57x0 24. Both items use pure copper for efficient heat transfer and include thermal interface materials for installation. The main difference lies in their shape and intended target. One is a long, narrow fin designed specifically for M.2 drives, while the other is a square block suited for general component cooling. You need to match the form factor to your hardware.
Key differences
| Aspect | Haojiaho Copper M.2 2280 SSD Heatsink | Haojiaho 40x40x6mm Copper Heatsink |
|---|---|---|
| Dimensions | 67x18x4mm | 40x40x6mm |
| Compatible Device | M.2 2280 SSD, PS5, Nintendo Switch | CPUs, circuit boards, IC chipboards |
| Mounting Type | Rubber rings | Thermal conductive adhesive tape |
| Weight | 1.01 ounces | 1.73 ounces |
Which one should you choose?
Choose Haojiaho Copper M.2 2280 SSD Heatsink if
- You are cooling an M.2 2280 SSD in a laptop or console with limited vertical clearance
- You prefer a mounting method that uses rubber rings instead of adhesive
- You need a lighter heatsink that fits narrow spaces
Choose Haojiaho 40x40x6mm Copper Heatsink if
- You are cooling a larger component like a CPU or IC chipboard on a circuit board
- You want a square footprint that covers more surface area
- You prefer a thicker heatsink that provides more thermal mass
Verdict: Choose the M.2 heatsink if your priority is fitting a long, low-profile cooler onto a drive. Choose the square copper heatsink if you need to cool a broader component with more surface area. Both rely on pure copper for reliable passive cooling.
Haojiaho Copper Heatsink Comparison
Compatible device
Product A is designed specifically for M.2 2280 SSDs. It also lists compatibility with PS5, Nintendo Switch, and smartphones. This makes it a targeted solution for storage drives and handheld consoles. Product B targets a broader range of components. It lists CPUs, circuit boards, and IC chipboards as compatible devices. This versatility suits general electronics cooling where the component shape is not standardized. You should choose based on your specific hardware. If you have an M.2 drive, Product A fits the form factor. For general chips, Product B offers a standard square base.
Dimensions
Product A measures 67 by 18 by 4 mm. It is long and narrow, fitting the standard M.2 2280 footprint. The low profile of 4 mm suits tight spaces on motherboards. Product B is a square block measuring 40 by 40 by 6 mm. It is wider and deeper than Product A. The 6 mm height provides more mass for heat dissipation. However, it does not match the linear shape of an M.2 stick. You must check your available space. Product A fits narrow slots. Product B requires a flat, open area for its square base.
Mounting type
Product A uses rubber rings for mounting. This method clamps the heatsink onto the drive without adhesives. It allows for easy removal and reinstallation. This is ideal for drives you might need to access. Product B uses thermal conductive adhesive tape. This sticks the heatsink directly to the component surface. It provides a permanent or semi-permanent bond. This method ensures stable contact but makes removal difficult. You must decide between the flexibility of rings or the stability of adhesive tape. The mounting style depends on whether you need frequent access.
Weight
Product A weighs 1.01 ounces. Its lighter weight reflects its smaller volume and narrow profile. This makes it less likely to stress delicate connectors on a motherboard. Product B weighs 1.73 ounces. It is significantly heavier due to its larger copper mass. The extra weight can help with thermal inertia. However, you must ensure your component can support the load. The adhesive tape on Product B must hold this weight securely. For light M.2 drives, the lighter Product A is safer. For robust chips, the heavier Product B may perform better.
Cooling performance
Product A claims a cooling effect of 5 to 20 degrees Celsius. This range depends on the environment and the SSD's workload. It is designed to keep data transfer speeds reliable. Product B does not list specific temperature drops. It focuses on reducing component temperature generally. It uses a groove design to increase the heat dissipation area. Both use pure copper for high thermal conductivity. Product A is optimized for the specific heat output of an M.2 SSD. Product B is a general-purpose sink. You should expect Product A to be more effective for its specific target device.
Which Haojiaho heatsink fits your build
M.2 SSD owners needing targeted cooling
Product A measures 67 by 18 by 4 mm, matching the standard M.2 2280 form factor. It includes rubber rings for secure mounting without adhesive residue. The low-profile design fits inside laptop compartments or tight desktop cases. You get a dedicated solution for storage drives that maintains data transfer speeds by reducing thermal throttling.
Users cooling CPUs or IC chips
Product B features a 40 by 40 by 6 mm square base, providing a larger contact area for heat sources like CPUs or circuit boards. It uses thermal conductive adhesive tape for a permanent bond. The 6 mm height offers more surface area for passive dissipation compared to thin pads. This shape suits precision equipment and general component cooling.
PS5 or Nintendo Switch enthusiasts
Product A explicitly lists compatibility with PS5 and Nintendo Switch consoles. Its slim 4 mm height allows installation in tight internal spaces where bulkier coolers would not fit. The pure copper construction ensures efficient heat spread from the console's internal storage. You receive a thermal pad to bridge any gaps between the chip and the copper block.
The products compared
Haojiaho Copper M.2 2280 SSD Heatsink
Best for: passive cooling of M.2 2280 SSDs
- Material
- Pure copper
- Compatible Device
- M.2 2280 SSD, PS5, Nintendo Switch
- Dimensions
- 67x18x4mm
- Mounting Type
- Rubber rings
- Features
- Thermal Pad
- Weight
- 1.01 ounces
View on Amazon: Haojiaho Copper M.2 2280 SSD Heatsink Affiliate link
This Haojiaho heatsink uses 100% pure copper to cool M.2 2280 SSDs. Its dimensions are 67x18x4mm. It includes a silicone thermal pad for heat transfer. The design fits PS5 and Nintendo Switch devices too. You get rubber rings for mounting. This kit helps maintain SSD speed by lowering temperatures. It is a simple, passive cooling solution for tight spaces.
Pros
- Constructed from 100% pure copper for high thermal conductivity
- Includes a low-viscosity silicone thermal pad for better contact
- Compatible with M.2 2280 SSDs, PS5, and Nintendo Switch
- Compact dimensions of 67x18x4mm fit narrow slots
Cons
- Only effective for M.2 2280 size drives
- Cooling range of 5-20°C depends on environment
- Uses rubber rings instead of screws for mounting
Good fit if
- You need a passive cooler for an M.2 2280 SSD
- You have limited vertical clearance for a heatsink
- You want a pure copper solution for PS5 or Switch
Skip if
- You require active fan-based cooling
- You use M.2 2230 or 2242 SSD sizes
- You prefer screw-mounted hardware over rubber rings
Verdict: Haojiaho Pure Copper M.2 2280 Heatsink is a compact passive cooling option for users with tight clearance. It suits those who need reliable heat dissipation for standard 2280 drives without adding bulk.
Haojiaho 40x40x6mm Copper Heatsink
Best for: small ICs and circuit boards
- Material
- Pure copper
- Compatible Device
- CPUs, circuit boards, IC chipboards
- Dimensions
- 40 x 40 x 6 mm
- Mounting Type
- Adhesive tape
- Features
- Thermal Tape
- Weight
- 1.73 ounces
View on Amazon: Haojiaho 40x40x6mm Copper Heatsink Affiliate link
This Haojiaho heatsink is a 40x40x6 mm pure copper block designed to dissipate heat from CPUs, circuit boards, and IC chipboards. It measures 1.57x1.57x0.24 inches and weighs 1.73 ounces. The unit includes thermal conductive adhesive tape for direct mounting. You get silent operation with zero noise, as there is no fan. This passive cooler suits components that need steady heat reduction without moving parts.
Pros
- Pure copper material for efficient thermal conductivity
- Dimensions of 40x40x6 mm provide ample surface area
- Includes thermal conductive adhesive tape for easy installation
- Zero operating noise due to passive design
Cons
- Passive design requires existing airflow to work effectively
- Adhesive mounting limits repositioning and removal options
- Small 6 mm height restricts use on larger components
Good fit if
- You need a silent cooling solution for small chips
- You are cooling a component with steady heat output
- You prefer passive cooling over fan-based systems
Skip if
- You require active cooling for high-wattage CPUs
- You need adjustable fan speed or noise control
- You are cooling a large processor without case airflow
Verdict: Haojiaho 40x40x6mm Copper Heatsink is a compact, silent option for low-to-moderate heat sources. It fits best on small ICs or circuit boards where space is tight and noise must be zero.
Specifications side by side
| Spec | Haojiaho Copper M.2 2280 SSD Heatsink | Haojiaho 40x40x6mm Copper Heatsink |
|---|---|---|
| Material | Pure copper | Pure copper |
| Compatible Device | M.2 2280 SSD, PS5, Nintendo Switch | CPUs, circuit boards, IC chipboards |
| Dimensions | 67x18x4mm | 40 x 40 x 6 mm |
| Mounting Type | Rubber rings | Adhesive tape |
| Features | Thermal Pad | Thermal Tape |
| Weight | 1.01 ounces | 1.73 ounces |
| Color | Copper | Copper |
| Model | FG6718 | 40x40x6mm |
Frequently asked questions
Which Haojiaho heatsink is better for an M.2 2280 SSD?
The Haojiaho Copper M.2 2280 SSD Heatsink is the correct choice. It measures 2.64 inches in length, matching the standard 2280 form factor. This ensures full coverage of the drive. The second model is only 1.57 inches square, which is too small to cover the entire component effectively.
What are the dimensions of the 40x40x6mm Haojiaho heatsink?
This model measures 1.57 inches by 1.57 inches by 0.24 inches. It is a compact square shape designed for small ICs or circuit boards. The height is 0.24 inches, making it suitable for tight spaces where noise must be zero and space is limited.
Does the M.2 heatsink include a thermal pad?
Yes, the Haojiaho Copper M.2 2280 SSD Heatsink includes a thermal pad. This feature helps transfer heat from the SSD to the copper body efficiently. The square 40x40x6mm model uses thermal tape instead, which serves a similar purpose but is packaged differently for installation.
How much does the M.2 heatsink weigh?
The Haojiaho Copper M.2 2280 SSD Heatsink weighs 1.01 ounces. This light weight makes it easy to install without adding significant mass to your build. The square 40x40x6mm model is slightly heavier at 1.73 ounces, though still lightweight for passive cooling applications.
Can I use the square heatsink for a laptop SSD?
It is not recommended. The square 40x40x6mm heatsink is only 1.57 inches wide, which is too small for most laptop M.2 drives. The dedicated M.2 2280 heatsink is 2.64 inches long, providing the necessary surface area to cool standard storage drives effectively.
What material are both Haojiaho heatsinks made of?
Both products are made of pure copper. Copper is chosen for its high thermal conductivity, allowing it to absorb and dissipate heat quickly. This material choice ensures reliable passive cooling for both SSDs and small electronic components without the need for fans or power.
Is the M.2 heatsink suitable for PS5 or Switch?
Yes, the M.2 heatsink is compatible with PS5, Nintendo Switch, and smartphones. Its 2.64-inch length matches the M.2 2280 standard used in these devices. The square heatsink is less suitable for these consoles as it does not match the required form factor for storage drives.