Haojiaho 6mm Pure Copper M.2 vs Haojiaho M.2 2230 Copper SSD: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide compares the haojiaho laptop nvme m 2 heatsink vs steam deck SSD heatsink. Both units use pure copper for efficient heat transfer and include thermal pads to bridge the gap between the SSD and the sink. The main difference lies in their physical design and target hardware. One is built for standard 2280 M.2 drives in laptops, while the other is sized specifically for compact 2230 NVMe SSDs found in handheld gaming consoles.
Key differences
| Aspect | Haojiaho 6mm Pure Copper M.2 2280 Heatsink | Haojiaho M.2 2230 Copper SSD Heatsink |
|---|---|---|
| Compatible Device | M.2 2280 SSD, PS5, Nintendo Switch | Steam Deck 2230 SSD, Rog Ally SSD |
| Dimensions | 70 x 21 x 6 mm | not listed |
| Included Tools | Rubber Rings | Screwdriver, Pry Bar, Triangle Pry Tool, Screws |
| Thermal Pad Type | Silicone Thermal Pad | Phase Change and Silicone Thermal Pad |
| Weight | 1.64 ounces | 0.63 ounces |
Which one should you choose?
Choose Haojiaho 6mm Pure Copper M.2 2280 Heatsink if
- You have a laptop or desktop with a standard 2280 M.2 SSD slot.
- You need a heatsink that also fits PS5 or Nintendo Switch components.
- You want a larger surface area with a 70mm length.
Choose Haojiaho M.2 2230 Copper SSD Heatsink if
- You are installing an NVMe SSD in a Steam Deck or ROG Ally.
- You need a compact 2230 form factor heatsink.
- You want a complete repair kit with screws and pry tools included.
Verdict: Choose the 2280 model if you are cooling a standard laptop or desktop SSD. Pick the 2230 model if you are upgrading a handheld gaming PC like the Steam Deck. Each product is optimized for its specific physical slot and thermal requirements.
Spec Comparison: M.2 2280 vs 2230
Compatible Device
Product A is designed specifically for M.2 2280 SSDs, which are the standard size for most laptops and desktops. It also lists compatibility with PS5, Nintendo Switch, and smartphones. Product B targets the smaller M.2 2230 form factor, making it ideal for handheld consoles like the Steam Deck, Sabrent Rocket 2230, and ROG Ally. You must choose based on your SSD length. A 2280 drive will not fit in a 2230 slot, and a 2230 drive is too short for a 2280 motherboard socket. The correct physical match is critical for installation.
Dimensions
Product A measures 70 x 21 x 6 mm, providing a larger surface area for heat dissipation. Product B does not list specific dimensions in the provided data, but its model name indicates a 2230 size, which is physically shorter than a 2280 drive. The height of Product A is 6 mm, which may interfere with low-profile laptop cases or nearby components. Product B is lighter at 0.63 ounces compared to Product A's 1.64 ounces. You need to check your available clearance space carefully before purchasing either option.
Included Accessories
Product A includes one heatsink, one thermal pad, and rubber rings. This is a simple package for standard installation. Product B offers a more comprehensive kit. It includes the copper heatsink, three phase change thermal pads, two silicone thermal pads, a screwdriver, an opening pry bar, a triangle pry tool, and eighteen screws. The inclusion of specific tools and screws makes Product B better suited for device teardowns, such as replacing a Steam Deck backplate. Product A lacks these specialized repair tools.
Thermal Pad Type
Product A provides a single low-viscosity, high-thermal-conductivity silicone thermal pad. This is standard for bridging the gap between the SSD controller and the heatsink. Product B includes both phase change and silicone thermal pads. Phase change pads often offer better thermal transfer across varying gaps and pressures than standard silicone pads. Product B also includes extra pads, allowing for redundancy or different stacking configurations. If you need precise thermal interface management, Product B's variety of pad types offers more flexibility.
Cooling Performance
Product A claims a cooling effect of 5°C to 20°C, depending on the environment. This suggests a significant temperature drop for the SSD. Product B states it reduces the risk of thermal runaway during intense gameplay but does not provide specific temperature reduction figures. Both use pure copper for efficient heat transfer. The larger surface area of Product A may dissipate heat faster in open airflow. Product B is optimized for confined handheld spaces. You should expect reliable performance from both, but Product A offers quantified cooling metrics.
Choose the Right Haojiaho Heatsink
Steam Deck or ROG Ally owners
Product B is built for M.2 2230 SSDs used in handheld consoles. It includes a complete repair kit with screws, pry tools, and multiple thermal pads. The pure copper sink fits the compact 2230 form factor, preventing contact with the back plate during intense gaming sessions.
Laptop or PS5 users
Product A targets the standard M.2 2280 size found in most laptops and consoles like the PS5. Its 70 x 21 x 6 mm dimensions provide a larger surface area for heat dissipation. It includes a silicone thermal pad to bridge the gap between the drive and the pure copper sink.
Users needing installation tools
Product B provides a full hardware kit for installation, including a screwdriver, pry bar, and eighteen screws. This is essential for replacing heatsinks in devices like the Steam Deck. Product A only includes the heatsink and a thermal pad, requiring you to source your own mounting hardware separately.
The products compared
Haojiaho 6mm Pure Copper M.2 2280 Heatsink
Best for: M.2 2280 SSDs with sufficient vertical clearance
- Material
- Pure copper
- Compatible Device
- M.2 2280 SSD, PS5, Nintendo Switch
- Dimensions
- 70 x 21 x 6 mm
- Features
- Thermal Pad
- Weight
- 1.64 ounces
View on Amazon: Haojiaho 6mm Pure Copper M.2 2280 Heatsink Affiliate link
This Haojiaho heatsink is built from 100% pure copper and measures 70 x 21 x 6 mm. It fits standard M.2 2280 SSDs and includes a silicone thermal pad to bridge the gap between the drive and the sink. The grooved design increases surface area for faster heat release. You get a 5°C to 20°C cooling drop depending on your environment. It also works with PS5 and Switch components if you have the space.
Pros
- Constructed from 100% pure copper for high thermal conductivity
- Includes a high-thermal-conductivity silicone thermal pad
- Grooved design maximizes heat dissipation surface area
- Reports a 5°C to 20°C temperature reduction
Cons
- Fixed 6mm thickness may not fit tight laptop chassis
- Only compatible with M.2 2280 form factor SSDs
- Does not include mounting screws for SSD retention
Good fit if
- You need a pure copper sink for an M.2 2280 drive
- You have at least 70mm of clear space above your slot
- You want to use the included thermal pad for easier installation
Skip if
- You are installing an M.2 2230 or 2242 SSD
- Your laptop has less than 6mm of clearance
- You require a heatsink that does not need a thermal pad
Verdict: Haojiaho 6mm Pure Copper M.2 Heatsink is a solid passive cooling solution for desktops or laptops with ample space. It suits users prioritizing copper conductivity over compact profiles.
Haojiaho M.2 2230 Copper SSD Heatsink
Best for: Steam Deck and ROG Ally 2230 SSD cooling
- Material
- Pure copper
- Compatible Device
- Steam Deck 2230 SSD, Rog Ally SSD
- Features
- Thermal Pad
- Weight
- 0.63 ounces
View on Amazon: Haojiaho M.2 2230 Copper SSD Heatsink Affiliate link
This Haojiaho heatsink is built for Steam Deck and ROG Ally 2230 NVMe SSDs. It uses pure copper for high heat dissipation. The package includes phase change and silicone thermal pads to flatten the SSD surface and prevent short circuits. It also provides a repair kit with tools and screws. Weighing 0.63 ounces, it helps reduce overheating risks during intense gaming sessions.
Pros
- Pure copper material for effective heat dissipation
- Includes phase change and silicone thermal pads
- Comes with installation tools and screws
- Designed specifically for 2230 form factor SSDs
Cons
- Limited to 2230 SSD size, not compatible with standard M.2 2280 drives
- Only includes one copper heatsink unit per package
- No mention of height clearance specifications for bulky cases
Good fit if
- You own a Steam Deck or ROG Ally with a 2230 SSD
- You want to prevent thermal throttling during heavy gaming
- You need a complete installation kit with necessary tools
Skip if
- You use a standard desktop or laptop with M.2 2280 SSDs
- You already have a cooling solution installed
- You require a heatsink for multiple drives
Verdict: Haojiaho Pure Copper Steam Deck M.2 Heatsink is a practical solution for handheld PC owners using 2230 SSDs. It delivers targeted cooling for Steam Deck and ROG Ally users who need to manage heat in a compact space.
Specifications side by side
| Spec | Haojiaho 6mm Pure Copper M.2 2280 Heatsink | Haojiaho M.2 2230 Copper SSD Heatsink |
|---|---|---|
| Material | Pure copper | Pure copper |
| Compatible Device | M.2 2280 SSD, PS5, Nintendo Switch | Steam Deck 2230 SSD, Rog Ally SSD |
| Dimensions | 70 x 21 x 6 mm | not stated |
| Features | Thermal Pad | Thermal Pad |
| Weight | 1.64 ounces | 0.63 ounces |
| Color | Copper | Copper |
| Model | Thk. 6mm | 2230T |
Frequently asked questions
Can I use the Haojiaho 6mm copper heatsink on my Steam Deck?
No. The B0CWNLJZSP model is sized for M.2 2280 SSDs. It measures 2.75 inches in length and 6 inches in height. Your Steam Deck requires an M.2 2230 drive. You need the smaller B0CWNLNDNS unit to fit the compact internal space of the handheld console.
What is the weight difference between the two Haojiaho copper sinks?
The 2280 heatsink weighs 1.64 ounces. The 2230 version weighs 0.63 ounces. The larger model is more than twice as heavy due to its greater surface area and material volume. This difference matters if you are balancing a handheld device or fitting a tight desktop case.
Do both Haojiaho heatsinks include thermal pads?
Yes. Both the B0CWNLJZSP and B0CWNLNDNS models feature integrated thermal pads. These pads ensure proper contact between the copper surface and the SSD chip. This design helps transfer heat away from the drive efficiently without requiring you to source separate adhesive materials.
Is the Haojiaho 6mm heatsink suitable for a PS5?
Yes. The product attributes list PS5 as a compatible device. It is designed for M.2 2280 SSDs, which are the standard expansion drive for the console. Ensure your PS5 has enough vertical clearance for the 6-inch height and 6mm thickness of the copper sink.
What material is used for the Haojiaho SSD cooling solutions?
Both units are made from pure copper. Copper offers high thermal conductivity, which helps dissipate heat from the SSD faster than aluminum. The B0CWNLJZSP is a 6mm thick copper block, while the B0CWNLNDNS is a smaller pure copper sink tailored for 2230 drives.
Which Haojiaho heatsink fits a standard laptop M.2 slot?
The B0CWNLJZSP is built for M.2 2280 SSDs. This is the standard size found in most laptops and desktops. It measures 2.75 inches long. Verify your laptop has sufficient height clearance for the 6-inch tall and 6mm thick copper unit before installation.
How does the 2230 heatsink compare to the 2280 model in size?
The 2230 model is significantly smaller. It weighs only 0.63 ounces compared to the 1.64 ounces of the 2280 unit. The 2280 heatsink is 2.75 inches long and 6 inches high. The 2230 version is compact enough to fit inside handheld devices like the ROG Ally.