Haojiaho Copper M.2 2280 SSD or Haojiaho M.2 Heatsink 67x18x2mm PS5? Which Haojiaho Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The haojiaho copper m 2 2280 SSD vs m 2 heatsink 67x18x2mm ps5 comparison helps you choose between two pure copper cooling kits. Both models share the same 67x18mm footprint, pure copper construction, and included thermal pads. They target M.2 2280 SSDs, PS5 consoles, and other heat-generating devices. The main difference lies in their height. One kit offers 4mm of thickness, while the other provides a thinner 2mm profile. This dimension affects clearance and cooling mass.
Key differences
| Aspect | Haojiaho Copper M.2 2280 SSD Heatsink | Haojiaho 67x18x2mm Pure Copper M.2 Heatsink |
|---|---|---|
| Heatsink Thickness | 4mm (0.16 inches) | 2mm (0.08 inches) |
| Weight | 1.01 ounces | 0.56 ounces |
| Model Identifier | FG6718 | Thk. 2mm |
Which one should you choose?
Choose Haojiaho Copper M.2 2280 SSD Heatsink if
- You need maximum thermal mass for sustained cooling performance.
- You have sufficient vertical clearance above the M.2 slot or console area.
- You prefer a heavier copper block for potentially better heat absorption.
Choose Haojiaho 67x18x2mm Pure Copper M.2 Heatsink if
- You are installing the heatsink in a tight space with limited height.
- You want a lighter component to reduce overall system weight.
- You need a low-profile solution for PS5 or laptop interiors.
Verdict: Choose the 4mm model if you prioritize maximum cooling capacity and have the necessary clearance. Opt for the 2mm model if space is constrained or you require a low-profile fit. Both offer identical material benefits and compatibility.
Heatsink Thickness and Weight
Heatsink thickness
The Haojiaho Copper M.2 2280 SSD Heatsink measures 4mm in height, while the Haojiaho 67x18x2mm Pure Copper M.2 Heatsink is only 2mm thick. This difference matters for clearance. If your PC case or console has tight space above the M.2 slot, the thinner 2mm model offers more room. The 4mm version provides more material to absorb and spread heat, but it requires checking your available vertical clearance carefully. Both fit the standard 67x18mm footprint, so the width and length are identical. You must measure the space around your drive before choosing between the thicker or thinner option.
Heatsink weight
Weight differs significantly between the two kits. The 4mm copper heatsink weighs 1.01 ounces. The 2mm copper heatsink weighs 0.56 ounces. The heavier 4mm model contains more copper mass, which can help buffer heat spikes by storing more thermal energy. The lighter 2mm model is easier to handle during installation. Both include rubber rings for mounting, so the additional weight is minimal in either case. For most users, the weight difference is negligible during setup. However, if you are installing this in a sensitive device like a Nintendo Switch or a smartphone, the lighter 2mm kit might be preferable to avoid adding unnecessary bulk.
Compatible devices
Both heatsinks are designed for M.2 2280 SSDs. They also list compatibility with PS5 consoles, Nintendo Switch devices, and smartphones. The product data for both models explicitly mentions these same devices. There is no difference in the listed compatible devices between the two options. You can use either heatsink on your gaming console or handheld device. The primary target remains the M.2 SSD in desktops or laptops. Since both share the same footprint and material, their application scope is identical. You do not need to worry about device compatibility when choosing between the 2mm and 4mm versions.
Thermal pad inclusion
Both kits include a silicone-based thermal pad. The product descriptions for both the 4mm and 2mm models state that a low-viscosity, high-thermal-conductivity thermal pad is included. This pad sits between the SSD chip and the copper heatsink to ensure efficient heat transfer. Neither model requires you to buy the pad separately. The inclusion of this component is standard for both options. You will receive one heatsink, one thermal pad, and rubber rings with either purchase. The thermal performance relies on this pad, so having it included is a key feature for both. There is no advantage in one kit over the other regarding this accessory.
Material construction
Both heatsinks are made from 100% pure copper. The product data confirms that both the 4mm and 2mm models use high-quality pure copper material. Copper offers better thermal conductivity than aluminum alloys. Both models feature a groove design to increase the heat dissipation area. This design helps release accumulated heat into the air faster. Since the material is identical, the cooling efficiency depends largely on the thickness of the copper. The 4mm model has twice the thickness of the 2mm model. This extra mass in the 4mm version may provide slightly better heat absorption, but the base material quality is the same for both.
Which Haojiaho Heatsink Fits You
PS5 owners with tight clearance
The 2mm thickness ensures this heatsink fits inside most PlayStation 5 consoles without interfering with the drive bay lid. The 0.08-inch height provides necessary clearance where the 4mm model would not fit. You get pure copper cooling in a slim profile that matches the console's internal constraints.
Users needing maximum heat dissipation
The 4mm height and 1.01-ounce weight provide more thermal mass than the lighter 2mm option. This extra copper volume helps absorb and dissipate heat more effectively for high-performance M.2 SSDs. If you have ample space above your drive, this thicker design offers better passive cooling potential.
General desktop or laptop builders
This model offers a robust 4mm profile suitable for desktops and notebooks where vertical clearance is not a primary constraint. The pure copper construction and included thermal pad work with standard M.2 2280 SSDs. It provides a reliable cooling solution for internal boards and precision equipment in open cases.
The products compared
Haojiaho Copper M.2 2280 SSD Heatsink
Best for: M.2 2280 SSDs with sufficient clearance
- Material
- Pure copper
- Compatible Device
- M.2 2280 SSD, PS5, Nintendo Switch
- Dimensions
- 67x18x4mm
- Mounting Type
- Rubber rings
- Features
- Thermal Pad
- Weight
- 1.01 ounces
View on Amazon: Haojiaho Copper M.2 2280 SSD Heatsink Affiliate link
This Haojiaho heatsink is built from pure copper for efficient heat dissipation. It measures 67x18x4mm and includes a silicone thermal pad for direct contact. The design fits M.2 2280 SSDs, PS5 consoles, and Nintendo Switch units. Rubber rings secure the unit in place. You get a cooling effect of 5°C to 20°C depending on your environment. This kit is suitable for desktops and laptops needing extra thermal management.
Pros
- Made from 100% pure copper material
- Includes silicone-based thermal pad
- Fits M.2 2280 SSDs and PS5
- Uses rubber ring mounting
Cons
- 4mm height may not fit tight cases
- No active fan included
- Cooling effect varies by environment
Good fit if
- You need a passive cooler for an M.2 2280 SSD
- You want pure copper construction for better conductivity
- You have enough clearance for a 4mm thick heatsink
Skip if
- You require active fan cooling for high heat loads
- Your case has less than 4mm clearance for M.2 slots
- You are using an M.2 2230 or 2242 drive size
Verdict: Haojiaho Copper M.2 2280 SSD Heatsink is a solid passive cooling option for users with adequate case clearance who prefer the thermal properties of pure copper over aluminum.
Haojiaho 67x18x2mm Pure Copper M.2 Heatsink
Best for: tight clearance M.2 or console cooling
- Socket Compatibility
- M.2 2280 SSD
- Material
- Pure Copper
- Dimensions
- 67x18x2mm
- Compatible Device
- Laptop, PS5, M.2 SSD
- Features
- Thermal Pad
- Weight
- 0.56 ounces
View on Amazon: Haojiaho 67x18x2mm Pure Copper M.2 Heatsink Affiliate link
This Haojiaho heatsink is a thin 2mm pure copper plate designed for M.2 2280 SSDs, PS5 consoles, and smartphones. It measures 67x18x2mm and includes a silicone thermal pad to bridge the gap between the chip and the metal. The 2mm profile allows installation in tight spaces where thicker coolers would interfere. It relies on copper’s high thermal conductivity to lower temperatures by 5°C to 20°C depending on your environment.
Pros
- Made from 100% pure copper for efficient heat transfer
- Ultra-thin 2mm height fits in tight clearance spaces
- Includes a silicone thermal pad for direct chip contact
- Compatible with M.2 2280 SSDs, PS5, and Switch
Cons
- Only 2mm thick, offering less surface area than 4mm models
- No active fan or airflow assistance included
- Passive cooling only, relying on case airflow
Good fit if
- You need a heatsink for a PS5 or Switch
- You have limited vertical clearance above your M.2 slot
- You want a passive copper solution for small devices
Skip if
- You require active cooling with a built-in fan
- You need a heatsink thicker than 2mm for maximum dissipation
- You are installing on an M.2 drive taller than 2mm without a pad
Verdict: Haojiaho 2mm Pure Copper M.2 Heatsink is a compact passive cooler for tight spaces. It suits PS5 owners or users with low clearance who need a thin copper plate with a thermal pad.
Specifications side by side
| Spec | Haojiaho Copper M.2 2280 SSD Heatsink | Haojiaho 67x18x2mm Pure Copper M.2 Heatsink |
|---|---|---|
| Socket Compatibility | not stated | M.2 2280 SSD |
| Material | Pure copper | Pure Copper |
| Compatible Device | M.2 2280 SSD, PS5, Nintendo Switch | not stated |
| Dimensions | 67x18x4mm | 67x18x2mm |
| Mounting Type | Rubber rings | not stated |
| Features | Thermal Pad | Thermal Pad |
| Weight | 1.01 ounces | 0.56 ounces |
| Color | Copper | Copper |
| Model | FG6718 | Thk. 2mm |
Frequently asked questions
Does the Haojiaho 2mm heatsink fit in a PS5?
Yes, the Haojiaho 67x18x2mm Pure Copper M.2 Heatsink is designed for tight clearance spaces like the PlayStation 5. Its 0.08-inch height ensures it fits inside most PS5 consoles without interfering with the drive bay lid. The included thermal pad helps transfer heat from the SSD to the copper plate effectively.
Is the Haojiaho Copper M.2 2280 SSD Heatsink pure copper?
Yes, both models are made from pure copper. The Haojiaho Copper M.2 2280 SSD Heatsink uses copper construction to provide solid passive cooling. Copper offers better thermal conductivity than aluminum, making it a reliable choice for users who prioritize thermal performance and have adequate clearance in their system.
What is the difference in weight between the two Haojiaho heatsinks?
The thicker Haojiaho Copper M.2 2280 SSD Heatsink weighs 1.01 ounces, while the thinner 2mm model weighs 0.56 ounces. The heavier unit contains more copper mass due to its 0.16-inch height. This extra mass may help with heat absorption, but the lighter option is better for space-constrained builds.
Do these heatsinks come with thermal pads?
Yes, both the Haojiaho Copper M.2 2280 SSD Heatsink and the 67x18x2mm Pure Copper M.2 Heatsink include thermal pads. These pads are essential for creating a thermal bridge between the SSD and the copper plate. They ensure efficient heat transfer and protect the SSD surface from direct contact with the metal.
Can I use the thicker Haojiaho heatsink on a laptop?
The thicker Haojiaho Copper M.2 2280 SSD Heatsink is best for users with adequate case clearance. Its 0.16-inch height may not fit in many laptops or tight console bays. For laptops, you should check your available height first. The thinner 2mm model is more versatile for low-profile devices.
Are the dimensions the same for both Haojiaho models?
Yes, both heatsinks share the same 67x18mm footprint, which corresponds to the standard M.2 2280 size. They both measure 2.64 inches in length and 0.71 inches in width. The only dimensional difference is the height, which is 0.16 inches for the standard model and 0.08 inches for the thin version.
Which Haojiaho model is better for a desktop PC?
The Haojiaho Copper M.2 2280 SSD Heatsink is ideal for desktop PCs with sufficient clearance. Its 0.16-inch height allows for more material to absorb heat. If your case has enough room above the M.2 slot, this model provides robust passive cooling. Choose the 2mm version only if space is extremely limited.