FPOUT 80x80 mm LGA 2011 Alternatives: 6 Similar Picks Compared

Comparing LGA 2011 Cooling Options

Dynatron 1U Server LGA 2011 CPU Cooler

The Dynatron R16 is a complete 1U server cooler, whereas the FPOUT is just a mounting bracket for your own fan. Dynatron measures 5.4 inches long and weighs 13.8 ounces, making it a substantial, self-contained unit. It is designed for dense rackmount environments where space is tight. You get a specialized low-profile solution that includes the fan and heatsink. The FPOUT is only 1.23 ounces and requires you to supply an 80mm fan. Choose the Dynatron if you need a ready-to-install cooling system for a server chassis. Pick the FPOUT only if you already have a compatible fan and just need a secure mount for an X99 or X79 motherboard.

Baibo Narrow Active CPU Cooler

The Baibo SNK-P0048AP4 is an active heatsink intended for server maintenance, specifically for X10DAI motherboards. Unlike the FPOUT bracket, which is a passive plastic mount, the Baibo unit is a complete cooling assembly with a fan. It serves users replacing failed components on specific server boards. The FPOUT is a lightweight, 1.23-ounce accessory that holds an 80mm fan. It does not cool the CPU itself. The Baibo offers a verified active cooling solution for legacy server hardware. Select the Baibo if you are repairing a server motherboard and need a direct replacement for the cooling unit. The FPOUT is better if you are building a custom setup and already own the fan you wish to use.

Noctua SFF Foam CPU Cooler Fan Duct Kit

The Noctua NA-FD1 is a fan duct kit, not a cooler or a mount. It measures 4.72 inches long and weighs 1.9 ounces. It is designed to optimize airflow in small form factor builds by bridging the gap between low-profile coolers and case panels. The FPOUT is a rigid bracket for an 80mm fan on LGA 2011 sockets. The Noctua product does not mount to the motherboard. It is an accessory for airflow management. Choose the Noctua if you have compatible Noctua coolers and need better air delivery in a tight case. The FPOUT is the right choice if you need a physical mounting point for an 80mm fan on an X99 or X79 board.

StarTech.com 65x60x45mm Socket 7/370 CPU Cooler

The StarTech cooler is built for legacy Socket 370 systems, not LGA 2011. It measures 65x60x45mm and weighs 4.8 ounces. It provides basic cooling for older hardware and does not support modern processors. The FPOUT is specifically designed for LGA 2011 sockets on X99 and X79 motherboards. The StarTech unit is a complete fan assembly, while the FPOUT is just a bracket. You cannot use the StarTech cooler for LGA 2011 CPUs. Pick the StarTech option only if you are reviving very old Socket 370 systems. The FPOUT is the correct selection for LGA 2011 builds where you need a secure mount for an 80mm fan.

Ultra Socket 775 Copper Core CPU Cooler

The Ultra P4 is a copper core cooler for LGA 775 sockets. It measures 9.7 inches long and weighs 1 pound. It is a direct replacement for older Intel systems with a copper base. The FPOUT is designed for LGA 2011, not LGA 775. The Ultra unit is a complete cooling solution with a fan, whereas the FPOUT is a lightweight plastic bracket. You cannot mount the Ultra cooler on an LGA 2011 board. Choose the Ultra if you need cooling for an LGA 775 motherboard. The FPOUT is the appropriate choice for LGA 2011 systems where you already have an 80mm fan and need a stable, secure mounting bracket.

Socket 478 Aluminum 70mm CPU Cooler

The Socket 478 Aluminum Cooler is a basic replacement part for legacy Intel Pentium systems. It features a 70mm fan and is made of aluminum. It fits users reviving old hardware with narrow case constraints. The FPOUT is designed for LGA 2011 sockets, not Socket 478. The FPOUT is a bracket for an 80mm fan, while the Socket 478 unit is a complete cooler assembly. The Socket 478 cooler does not support LGA 2011 processors. Select the Socket 478 cooler only if you are working with legacy Pentium systems. The FPOUT is the right pick for LGA 2011 builds where you need a lightweight, secure mount for your existing 80mm fan.

Quick picks

Our 7 picks

1 Best overall

FPOUT 80x80 mm LGA 2011 Cooler Mount Bracket

Best for: LGA 2011 small fan mounting

Socket Compatibility

LGA2011

Features

Fan

Weight

1.23 ounces

View on Amazon: FPOUT 80x80 mm LGA 2011 Cooler Mount Bracket Affiliate link

This FPOUT kit is a mounting bracket for LGA 2011 sockets, designed for X99 and X79 motherboards. It measures 80x80 mm and weighs 1.23 ounces. The black plastic construction holds a fan or heatsink firmly. You get the bracket and four screws. It is a simple, durable solution for securing your cooling hardware to the socket.

Pros

• Compatible with LGA 2011 sockets
• Supports X99 and X79 motherboards
• Compact 80x80 mm size
• Lightweight at 1.23 ounces

Cons

• Plastic construction may feel less premium than metal
• Only includes bracket and screws, no fan or heatsink
• 80x80 mm size is smaller than standard 120mm fans

Good fit if

• You need a replacement bracket for an LGA 2011 build
• You are using a small 80mm fan or heatsink
• You want a lightweight mounting solution

Skip if

• You require a complete cooler with fan and heatsink
• You need support for LGA 115x or AM4 sockets
• You prefer metal brackets for maximum rigidity

Verdict: FPOUT 80mm LGA 2011 Cooler Bracket is a basic but functional mount for LGA 2011 systems. It fits users who already have an 80mm fan and need a secure, lightweight bracket for their X99 or X79 motherboard.

2 Best server

Dynatron 1U Server LGA 2011 CPU Cooler

Best for: 1U server chassis with LGA2011 CPUs

Socket Compatibility

LGA2011

TDP Rating

150 Watts

System Type

Server

Server Height

1U

Features

Fan

Dimensions

5.4 × 2.1 × 4.7 inches

View on Amazon: Dynatron 1U Server LGA 2011 CPU Cooler Affiliate link

The Dynatron R16 is a 1U server CPU fan designed for Intel LGA2011 sockets. It supports CPUs with a TDP up to 150 Watts. The heatsink uses a vapor chamber base with copper stacked fins. Pre-printed Shin-Etsu G751 thermal compound is included. Its compact dimensions fit standard 1U server chassis. This cooler is built for dense server environments rather than standard desktop cases.

Pros

• Supports up to 150W TDP
• Vapor chamber base for heat transfer
• Pre-applied Shin-Etsu G751 thermal compound
• 1U height fits server racks

Cons

• 1U height is too short for most desktop cases
• 80x80mm fan size is smaller than standard 120mm or 140mm fans
• Designed specifically for server systems, not consumer PCs

Good fit if

• You are building a 1U server chassis
• You need to cool an LGA2011 processor under 150W
• You require a low-profile cooling solution for a rackmount system

Skip if

• You are installing the cooler in a standard ATX desktop case
• You need a cooler with a larger 120mm or 140mm fan
• You are using a socket other than LGA2011

Verdict: Dynatron R16 1U LGA2011 Server Cooler is a specialized low-profile solution for 1U server builds. It fits users who need to cool LGA2011 CPUs in dense rackmount environments where space is limited.

3 Best premium

Baibo Narrow Active CPU Cooler

Best for: LGA 2011 server motherboard fan replacement

Socket Compatibility

LGA 2011

Cooling Method

Active

Features

Fan

View on Amazon: Baibo Narrow Active CPU Cooler Affiliate link

This Baibo SNK-P0048AP4 is an active heatsink designed for Intel LGA 2011 sockets. It features a narrow profile and includes a cooling fan for active thermal management. The unit is tested for functionality before shipping. It suits users needing a direct replacement for server or workstation motherboards like the X10DAI series. The compact design fits specific chassis constraints while maintaining compatibility with the target socket.

Pros

• Compatible with Intel LGA 2011 sockets
• Active cooling method with included fan
• Narrow heatsink profile for tight spaces
• Pre-tested for operational functionality

Cons

• Limited to LGA 2011 socket compatibility
• No mention of adjustable fan speed settings
• Basic active cooling without advanced heat pipe details

Good fit if

• You need a replacement fan for X10DAI or X10DAL-I motherboards
• You require an active cooler for an LGA 2011 CPU
• You are building or repairing a server with space constraints

Skip if

• You use a different socket type like LGA 1700 or AM5
• You need a cooler for consumer desktop gaming cases
• You prefer passive cooling without a fan

Verdict: Baibo SNK-P0048AP4 LGA 2011 Active Heatsink is a targeted solution for server maintenance. It fits users replacing failed components on X10DAI motherboards who need a verified active cooling unit.

4 Also great

Noctua SFF Foam CPU Cooler Fan Duct Kit

Best for: Small form factor cases with low-profile coolers

Features

Fan

Dimensions

4.72 × 3.9 × 1.89 inches

Weight

1.9 ounces

View on Amazon: Noctua SFF Foam CPU Cooler Fan Duct Kit Affiliate link

The Noctua NA-FD1 is a fan duct kit designed to bridge the gap between a CPU cooler and perforated case panels. It uses modular EVA foam spacers adjustable from 5 to 45 mm to improve cooling performance by up to 5°C. This kit fits low-profile coolers like the NH-L9a and NH-L9i. It is a practical accessory for small form factor builds where airflow optimization is critical.

Pros

• Modular EVA foam spacers adjust in 1 mm increments
• Spacer range covers 5 to 45 mm gaps
• Compatible with NH-L9i and NH-L9a low-profile coolers
• Improves cooling performance by up to 5°C

Cons

• Limited to specific Noctua low-profile cooler models
• Does not include the CPU cooler itself
• Requires separate purchase of compatible fan duct components

Good fit if

• You use a small form factor case with perforated panels
• You own a compatible Noctua NH-L9a or NH-L9i cooler
• You need precise airflow management for tight spaces

Skip if

• You are looking for a complete CPU cooler solution
• You use a standard ATX case with solid panels
• You do not have a compatible Noctua low-profile cooler

Verdict: The Noctua NA-FD1 Fan Duct Kit is a specialized accessory for optimizing airflow in small form factor builds. It fits users who already own compatible Noctua low-profile coolers and need to bridge the gap to case panels for better cooling.

5 Best budget

StarTech.com 65x60x45mm Socket 7/370 CPU Cooler

Best for: legacy Socket 370 systems

Socket Compatibility

Socket 7/370

Features

Fan

Weight

4.8 ounces

View on Amazon: StarTech.com 65x60x45mm Socket 7/370 CPU Cooler Affiliate link

This StarTech.com cooler measures 65x60x45mm and weighs 4.8 ounces. It supports Socket 7 and Socket 370 processors. The unit includes a fan for active cooling. It uses a TX3 connector for power. This compact heatsink suits older systems requiring specific socket compatibility. It fits well in builds needing small form factor solutions for legacy hardware.

Pros

• Supports Socket 7 and Socket 370
• Compact 65x60x45mm dimensions
• Lightweight at 4.8 ounces
• Includes active fan cooling

Cons

• Limited to older Socket 7 and 370
• Uses older TX3 connector
• Smaller heatsink size limits heat dissipation

Good fit if

• You need a cooler for Socket 370
• You require a compact 65x60mm heatsink
• You are building a legacy system

Skip if

• You use modern LGA sockets
• You need high airflow for hot CPUs
• You require PWM fan control

Verdict: StarTech 65x60x45mm Socket 7/370 Cooler provides basic cooling for legacy Socket 370 builds. It fits users who need a small, lightweight fan for older hardware. It does not support modern processors.

6 Best lga 775

Ultra Socket 775 Copper Core CPU Cooler

Best for: LGA 775 socket replacement cooling

Socket Compatibility

Socket 775

Fan Speed

3600 RPM

Material

Copper

Features

Fan

Dimensions

9.7 × 3.7 × 7.1 inches

Weight

1 pounds

View on Amazon: Ultra Socket 775 Copper Core CPU Cooler Affiliate link

The Ultra P4 is a Socket 775 cooler built with a copper core and aluminum fins. It uses a sleeve bearing fan that runs at 3600 RPM with PWM control. This 1-pound unit measures 9.7 by 3.7 by 7.1 inches. It suits users needing basic cooling for older Intel platforms. The design prioritizes direct heat transfer through the copper base.

Pros

• Copper core heatsink construction for efficient heat transfer
• PWM fan speed control for adjustable airflow
• High 3600 RPM fan speed for active cooling
• Compatible with LGA 775 socket

Cons

• Sleeve bearing type may have shorter lifespan than fluid dynamic bearings
• Single copper core design lacks full vapor chamber coverage
• Basic fan construction with no advanced noise reduction features

Good fit if

• You need a replacement cooler for an LGA 775 motherboard
• You want a copper core for better thermal conductivity
• You require PWM fan control for adjustable speeds

Skip if

• You are using an LGA 2011 or newer socket
• You need a silent fan with fluid dynamic bearings
• You require a vapor chamber or heat pipe design

Verdict: Ultra P4 LGA 775 Copper Core Cooler fits users who need a direct replacement for older Intel systems with a copper base. It provides reliable airflow for standard processors on LGA 775 boards.

7 Also great

Socket 478 Aluminum 70mm CPU Cooler

Best for: legacy Socket 478 systems

Socket Compatibility

Socket 478

Fan Size

70 mm

Features

Fan

View on Amazon: Socket 478 Aluminum 70mm CPU Cooler Affiliate link

This is a Socket 478 heatsink and fan combo for older Intel Pentium and Celeron processors. It uses a 70 mm fan with a sleeve bearing. The aluminum heat sink supports CPUs up to 3.2 GHz. It draws 2.16 W at 12 V. You get a 3-pin connector for the motherboard. It is built for legacy systems, not modern high-performance builds.

Pros

• 70 mm fan size for narrow cases
• Aluminum heat sink construction
• 3-pin motherboard connector
• Supports Socket 478 CPUs up to 3.2 GHz

Cons

• Only fits Socket 478
• Small 70 mm fan limits cooling capacity
• Sleeve bearing has shorter lifespan than fluid dynamic

Good fit if

• You are upgrading an old Socket 478 PC
• You need a replacement fan for legacy hardware
• You have a small form factor case

Skip if

• You use a modern LGA socket
• You need high airflow for gaming
• You require PWM fan control

Verdict: Socket 478 Aluminum Cooler 70mm Fan is a basic replacement part for legacy Intel Pentium systems. It fits users who need to revive old hardware with narrow case constraints.

Specifications side by side

Frequently asked questions

See also

• cooler master 360l core aio CPU alternatives
• gymax fan bike alternatives