Easycargo or Icepc? Heatsinks Compared in 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This easycargo vs icepc heatsink comparison looks at two copper cooling solutions for different devices. Both use copper for heat transfer and include adhesive backing for easy installation. The main difference is their intended use. The Easycargo option consists of small shims for passive cooling on laptop components. The Icepc unit is a larger heatsink designed specifically for mSATA SSDs. You should choose based on the specific hardware you need to cool.
Key differences
| Aspect | Easycargo 15x15x0.5mm Copper Shims 20-Pack | Icepc Pure Copper Heatsink for 50x30mm mSATA SSD |
|---|---|---|
| Compatible Device | Laptop GPU, CPU, VRAM, IC chipset | 50x30mm mSATA SSD |
| Dimensions | 15x15x0.5mm | 40x26x4mm |
| Material Specification | Copper | Pure copper |
| Design Features | Flat shim | Broken groove design for increased surface area |
Which one should you choose?
Choose Easycargo 15x15x0.5mm Copper Shims 20-Pack if
- You need to cool specific laptop components like GPU or VRAM chips.
- You require very small 15x15mm copper shims with pre-applied adhesive.
- You are looking for a passive cooling solution for IC chips.
Choose Icepc Pure Copper Heatsink for 50x30mm mSATA SSD if
- You need to cool a 50x30mm mSATA SSD.
- You want a heatsink with a broken groove design to increase heat dissipation.
- You prefer a thicker 4mm copper block for better thermal mass.
Verdict: The Easycargo shims are suitable for targeted cooling of small laptop components. The Icepc heatsink is better for mSATA SSDs due to its larger size and groove design. Choose the product that matches your specific hardware requirements.
Easycargo vs Icepc Heatsink Comparison
Compatible Device
The Easycargo shims are designed for passive cooling on laptop GPUs, CPUs, VRAM ICs, and chipset components. They are small pads meant to fill gaps between heat sources and larger heatsinks. The Icepc heatsink is built specifically for 50x30mm mSATA SSDs. It fits models like the PM830 and SL700. You cannot use the Icepc unit on a laptop CPU. You cannot use the Easycargo shims as a primary cooler for an SSD. Each product targets a distinct hardware category. Choose Easycargo for internal laptop component gap filling. Choose Icepc for mSATA SSD thermal management.
Build Material
Both products use copper for heat transfer. The Easycargo shims are made of copper pads. The Icepc heatsink is made of pure copper. Pure copper offers higher thermal conductivity than aluminum. This allows the Icepc unit to dissipate heat more effectively. The Easycargo shims also rely on copper for conductivity. However, their thin profile limits heat spreading. The Icepc design uses a broken groove structure to increase surface area. This helps the SSD run cooler. Both choices provide solid copper construction for their respective roles.
Dimensions
Size differences are significant between these two items. The Easycargo shims measure 15x15x0.5mm. They are very thin and small. This allows them to fit in tight spaces inside laptops. The Icepc heatsink measures 40x26x4mm. It is much larger and thicker. The height of 4mm is important for clearance on mSATA drives. The Easycargo shims are only 0.5mm thick. You must match the size to your device. The Easycargo fits small gaps. The Icepc fits standard mSATA SSD footprints. Neither is a universal fit for all hardware types.
Mounting Type
Both products use adhesive for installation. The Easycargo shims come with pre-applied 3M 8810 thermal conductive adhesive tape. This makes placement easy and secure. The Icepc heatsink also features an adhesive backing. It uses a silica gel pad with high thermal conductivity. You must remove the blue protective film before installation. Both methods avoid the need for screws or tools. The adhesive ensures stable contact with the heat source. This tool-free approach simplifies the process for both laptop repairs and SSD upgrades.
Cooling Method
The Easycargo shims are for passive cooling only. They do not have fans or active components. They work by conducting heat away from ICs. The Icepc heatsink also relies on passive cooling. It uses a broken groove design to increase heat dissipation area. This allows the SSD to exude heat faster through air contact. The Icepc claims a cooling effect of 10°C to 25°C. This varies by environment. Both solutions depend on airflow and surface area. Neither provides active cooling with fans.
Which heatsink fits your device needs
You have a 50x30mm mSATA SSD
The Icepc heatsink is sized specifically for 50x30mm mSATA SSDs. Its pure copper construction offers high thermal conductivity to dissipate heat. The broken groove design increases the surface area for better air exchange. This dedicated form factor ensures proper coverage and cooling for your specific storage device.
You need small copper shims for laptops
The Easycargo product provides 20 small copper shims measuring 15x15x0.5mm. These are ideal for filling gaps between heat sources and heatsinks on laptop GPUs, CPUs, or VRAM. The pre-applied 3M 8810 adhesive tape simplifies installation for passive cooling applications where space is tight.
You want high thermal conductivity copper
The Icepc heatsink uses pure copper with a thermal conductivity of 401W/mk. This is higher than standard aluminum options. The material helps the SSD run more smoothly by exuding heat faster through the increased surface area of the broken groove design. This results in a noticeable cooling effect.
The products compared
Easycargo 15x15x0.5mm Copper Shims 20-Pack
Best for: Laptop GPU and VRAM thermal management
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- Laptop GPU CPU IC Chips VGA RAM
- Dimensions
- 15x15x0.5mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link
This is a pack of 20 copper thermal shims for passive cooling. Each pad measures 15x15x0.5mm with a pre-applied 3M 8810 adhesive backing. You can use these for laptop GPUs, CPUs, VRAM, and chipset ICs. The copper material helps spread heat. This product suits you if you need small, sticky thermal pads for tight spaces in electronics.
Pros
- Made of pure copper for heat spreading
- Pre-applied 3M 8810 thermal adhesive tape
- Compact 15x15x0.5mm dimensions
- Pack includes 20 pieces
Cons
- Passive cooling only, no fan included
- Very small 15x15mm surface area
- Not suitable for large desktop CPU heatsinks
Good fit if
- You need thermal pads for laptop VRAM
- You are cooling small chipset ICs
- You want pre-applied adhesive for easy installation
Skip if
- You need active cooling with a fan
- You are cooling a standard desktop CPU
- You require large surface area heatsinks
Verdict: Easycargo Copper Pad Shims 15x15mm fits you if you are repairing or upgrading laptop components like GPU VRAM or chipsets. It is not a solution for desktop processors.
Icepc Pure Copper Heatsink for 50x30mm mSATA SSD
Best for: 50x30mm mSATA SSD passive cooling
- Material
- Pure copper
- Compatible Device
- 50x30mm mSATA SSD
- Dimensions
- 40x26x4mm
- Mounting Type
- Adhesive backing
- Weight
- 0.63 ounces
View on Amazon: Icepc Pure Copper Heatsink for 50x30mm mSATA SSD Affiliate link
This Icepc heatsink is made of pure copper for higher thermal conductivity than aluminum. It measures 40x26x4mm and fits 50x30mm mSATA SSDs. The broken groove design increases the heat dissipation area. You install it using a high-performance thermal adhesive backing. This tool-free solution helps your SSD run more smoothly by reducing temperatures by 10°C to 25°C.
Pros
- Pure copper material offers 401W/mk thermal conductivity
- Broken groove design increases heat dissipation area
- Tool-free installation with high-performance thermal adhesive
- Specifically fits 50x30mm mSATA SSDs
Cons
- Only compatible with 50x30mm mSATA SSDs
- Uses adhesive mounting instead of screws
- No fan for active cooling
Good fit if
- You have a 50x30mm mSATA SSD
- You want passive cooling for an older drive
- You prefer tool-free installation
Skip if
- You use an M.2 NVMe drive
- You need active cooling with a fan
- Your SSD is not 50x30mm
Verdict: Icepc Pure Copper mSATA Heatsink is a passive cooling solution for 50x30mm mSATA SSDs. It suits users who need a simple, tool-free copper heatsink to lower temperatures on older storage devices.
Specifications side by side
| Spec | Easycargo 15x15x0.5mm Copper Shims 20-Pack | Icepc Pure Copper Heatsink for 50x30mm mSATA SSD |
|---|---|---|
| Material | Copper | Pure copper |
| Cooling Method | passive | not stated |
| Compatible Device | Laptop GPU CPU IC Chips VGA RAM | 50x30mm mSATA SSD |
| Dimensions | 15x15x0.5mm | 40x26x4mm |
| Mounting Type | Pre applied adhesive tape backing | Adhesive backing |
| Features | Thermal Tape | not stated |
| Length | 0.59 inches | not stated |
| Width | 0.59 inches | not stated |
| Weight | not stated | 0.63 ounces |
| Size | 15x15x0.5mm | 40x26x4mm |
| Color | Copper Tone | not stated |
| Model | NA | ICEPC0002-4 |
Frequently asked questions
Can I use the Easycargo shims on a desktop CPU?
No. The Easycargo 15x15x0.5mm copper shims are designed for laptop components. They are intended for GPU VRAM, chipsets, or RAM modules. The product verdict explicitly states it is not a solution for desktop processors. You should look for a dedicated air or liquid cooler for your desktop CPU instead.
What size is the Icepc heatsink for mSATA SSDs?
The Icepc Pure Copper Heatsink measures 40x26x4mm. It is designed for 50x30mm mSATA SSDs. The unit weighs 0.63 ounces. Its model number is ICEPC0002-4. This size allows it to fit on older storage devices without requiring tools for installation.
Do these products include thermal tape or adhesive?
Yes. The Easycargo shims feature thermal tape as a key attribute. This allows you to stick the copper pads directly onto components like laptop GPUs or VRAM. The Icepc heatsink also uses adhesive backing for simple installation. Both solutions rely on this material to stay in place.
Which heatsink is better for laptop GPU repair?
The Easycargo shims are the better choice for laptop GPU repair. They measure 15x15x0.5mm and are made of pure copper. These small pads help fill gaps between heat sources and larger heatsinks. The Icepc option is only suitable for mSATA SSDs and will not fit laptop graphics cards.
Is the Icepc heatsink made of aluminum or copper?
The Icepc heatsink is made of pure copper. This material offers high thermal conductivity to dissipate heat effectively from your storage device. The Easycargo shims are also made of copper. Both brands choose this metal for its superior ability to transfer heat away from sensitive electronic components.
Can I use the Icepc heatsink for a modern NVMe drive?
No. The Icepc Pure Copper Heatsink is built specifically for 50x30mm mSATA SSDs. It will not fit modern M.2 NVMe drives, which have different form factors. You need a heatsink designed for the specific dimensions of your current storage device to ensure proper cooling and physical compatibility.