Easycargo vs Haojiaho: Heatsinks Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This easycargo vs haojiaho heatsink comparison looks at two copper-based cooling solutions. Both use pure copper for heat dissipation. The main difference is their intended use. Easycargo offers small shim pads for passive cooling of laptop components. Haojiaho provides a larger heatsink kit designed for M.2 SSDs and consoles. You should choose based on the specific device you need to cool.
Key differences
| Aspect | Easycargo 15x15x0.5mm Copper Shims 20-Pack | Haojiaho Copper M.2 2280 SSD Heatsink |
|---|---|---|
| Compatible Device | Laptop GPU, CPU, VRAM, IC, VGA RAM | M.2 2280 SSD, PS5, Nintendo Switch, Smartphones |
| Dimensions | 15x15x0.5mm | 67x18x4mm |
| Mounting Type | Pre-applied 3M 8810 adhesive tape | Rubber rings |
| Included Accessories | 20 copper shims with tape | 1 heatsink, 1 thermal pad, rubber rings |
Which one should you choose?
Choose Easycargo 15x15x0.5mm Copper Shims 20-Pack if
- You need to cool small components like laptop VRAM or chipset ICs
- You require a low-profile solution with pre-applied adhesive
- You are building a passive cooling setup for internal laptop parts
Choose Haojiaho Copper M.2 2280 SSD Heatsink if
- You are cooling an M.2 2280 SSD in a laptop or desktop
- You need a heatsink for a PS5 or Nintendo Switch
- You prefer a mounting method using rubber rings instead of adhesive
Verdict: Choose Easycargo if you need small shims for passive laptop component cooling. Choose Haojiaho if you need a dedicated heatsink for M.2 SSDs or gaming consoles. The specs show they serve entirely different cooling needs.
Easycargo vs Haojiaho Spec Comparison
Compatible Device
Easycargo targets laptop GPU, CPU, VRAM, and chipset cooling with small 15x15mm shims. These are ideal for passive cooling on compact integrated circuits. Haojiaho focuses on M.2 2280 SSDs, PS5 consoles, and Nintendo Switch units. Its larger 67x18x4mm design covers broader surface areas typical of storage drives. You must choose based on your hardware type. Easycargo suits fine-grained component temperature management. Haojiaho addresses bulkier storage or console heat sources. The scope of application differs significantly between the two products.
Material
Both products rely on copper for thermal conductivity. Easycargo uses copper pad shims to bridge gaps and transfer heat. Haojiaho constructs its heatsink from 100% pure copper. Pure copper offers higher thermal efficiency than aluminum alloys. This material choice helps dissipate heat faster into the air. Both brands prioritize copper to maximize heat transfer on contact surfaces. You get reliable thermal properties regardless of which option you select. The material quality is comparable, though the form factor varies greatly between thin shims and a substantial heatsink block.
Dimensions
Size differences are stark between these two items. Easycargo shims measure just 15x15x0.5mm. They are thin adhesive pads designed for tight spaces. Haojiaho heatsink measures 67x18x4mm. It is significantly larger and thicker. This size allows for greater heat dissipation area through its groove design. You need ample clearance for the Haojiaho unit. Easycargo fits where space is extremely limited. The dimensional contrast highlights their distinct purposes. One is a shim, the other is a dedicated cooler.
Mounting Type
Installation methods differ between the two products. Easycargo uses pre-applied 3M 8810 thermal conductive adhesive tape. This allows for direct bonding to components without additional hardware. Haojiaho uses rubber rings for mounting. It also includes a silicone-based thermal pad for the contact surface. The rubber rings provide flexibility in installation. The thermal pad enhances cooling effect by filling gaps. You can choose adhesive bonding or mechanical clamping based on your preference and hardware constraints.
Cooling Method
Easycargo provides passive cooling through direct heat transfer. It relies on the thermal conductivity of copper and adhesive to move heat away from components. Haojiaho also offers passive cooling but with a larger surface area. Its groove design increases the area for heat release. This design helps accumulated heat dissipate into the air faster. Haojiaho claims a cooling effect of 5-20°C depending on the environment. Easycargo does not list specific temperature reductions. The larger heatsink structure of Haojiaho generally supports more effective passive dissipation.
Choose based on your device size
Laptop GPU or VRAM cooler
You need to cool small chips like VRAM or laptop GPUs. The Easycargo shims are 15x15x0.5mm. They fit tight spaces. The pre-applied 3M 8810 tape simplifies installation. This passive solution works well for compact integrated circuits without adding bulk.
M.2 SSD or console user
You have an M.2 2280 SSD, PS5, or Nintendo Switch. The Haojiaho heatsink is 67x18x4mm. It includes a silicone thermal pad for better heat transfer. Pure copper material improves conductivity. This kit is designed for larger components that generate more heat.
Compact component thermal manager
You are managing heat on chipset or IC components. The Easycargo pads are thin and small. They do not interfere with nearby parts. The adhesive backing holds them in place securely. This is a practical choice for passive cooling on small, high-density boards.
The products compared
Easycargo 15x15x0.5mm Copper Shims 20-Pack
Best for: Laptop VRAM and chipset gap filling
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- Laptop GPU CPU IC Chips VGA RAM
- Dimensions
- 15x15x0.5mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link
You get 20 copper pad shims measuring 15x15x0.5mm. Each unit uses 3M 8810 thermal conductive adhesive tape for mounting. This passive cooling solution fits laptop GPUs, CPUs, VRAM, and chipset ICs. The copper material helps spread heat. You use these shims to bridge gaps between components and heatsinks. This kit is designed for small-scale thermal management in tight spaces.
Pros
- Copper material for heat dissipation
- Pre-applied 3M 8810 adhesive tape
- Includes 20 units per pack
- Thin 0.5mm profile
Cons
- Passive cooling only, no fans
- Small 15x15mm surface area
- Not for desktop CPU blocks
Good fit if
- You need to fill gaps on laptop VRAM
- You are cooling small chipset ICs
- You want pre-applied adhesive for easy install
Skip if
- You need active cooling with fans
- You are cooling a standard desktop CPU
- You require large surface area heatsinks
Verdict: Easycargo 15mm Copper Heatsink Shims are useful for bridging gaps on laptop components. You should buy this kit if you need passive thermal pads for small ICs or VRAM.
Haojiaho Copper M.2 2280 SSD Heatsink
Best for: Low-profile passive cooling for M.2 2280 SSDs
- Material
- Pure copper
- Compatible Device
- M.2 2280 SSD, PS5, Nintendo Switch
- Dimensions
- 67x18x4mm
- Mounting Type
- Rubber rings
- Features
- Thermal Pad
- Weight
- 1.01 ounces
View on Amazon: Haojiaho Copper M.2 2280 SSD Heatsink Affiliate link
This Haojiaho heatsink is a solid 67x18x4mm block made from 100% pure copper. It includes a silicone thermal pad to bridge the gap between your SSD and the cooler. The design uses rubber rings for mounting, which keeps the profile low at just 4mm tall. It fits M.2 2280 drives and can also cool devices like the PS5 or Nintendo Switch. You get reliable passive cooling without needing fans or extra power.
Pros
- Made from 100% pure copper for high thermal conductivity
- Includes a silicone thermal pad for better heat transfer
- Low 4mm height fits in tight spaces
- Mounts securely with included rubber rings
Cons
- No active fan for forced airflow
- Limited to passive cooling performance
- Only compatible with M.2 2280 size drives
Good fit if
- You need a low-profile cooler for a thin laptop or console
- You want a passive solution that requires no power
- You have an M.2 2280 SSD that runs hot
Skip if
- You need active cooling with a fan
- Your SSD is not M.2 2280 size
- You require a taller heatsink for maximum dissipation
Verdict: Haojiaho M.2 2280 Copper Heatsink is a simple, passive cooling solution for users who need a low-profile, fanless option for their M.2 2280 SSDs.
Specifications side by side
| Spec | Easycargo 15x15x0.5mm Copper Shims 20-Pack | Haojiaho Copper M.2 2280 SSD Heatsink |
|---|---|---|
| Material | Copper | Pure copper |
| Cooling Method | passive | not stated |
| Compatible Device | Laptop GPU CPU IC Chips VGA RAM | M.2 2280 SSD, PS5, Nintendo Switch |
| Dimensions | 15x15x0.5mm | 67x18x4mm |
| Mounting Type | Pre applied adhesive tape backing | Rubber rings |
| Features | Thermal Tape | Thermal Pad |
| Length | 0.59 inches | not stated |
| Width | 0.59 inches | not stated |
| Weight | not stated | 1.01 ounces |
| Size | 15x15x0.5mm | not stated |
| Color | Copper Tone | Copper |
| Model | NA | FG6718 |
Frequently asked questions
Which heatsink is better for laptop VRAM cooling?
The Easycargo shims are the better choice for laptop VRAM. They measure 15x15x0.5mm, fitting tightly around small integrated circuits. The copper material helps dissipate heat passively. Pre-applied thermal tape simplifies installation on compact laptop components. This makes them ideal for bridging gaps on chipset or memory modules without bulk.
Can Haojiaho heatsink cool an M.2 SSD?
Yes, the Haojiaho heatsink is designed specifically for M.2 2280 SSDs. It measures 2.64 inches in length, matching standard drive sizes. The copper construction provides passive cooling without requiring fans. This low-profile solution helps maintain optimal temperatures for storage drives in laptops, consoles, or desktops where airflow is limited.
What is the material used in both products?
Both products use pure copper for their heat dissipation surfaces. Copper is chosen for its high thermal conductivity, which moves heat away from components efficiently. Easycargo shims are copper tone, while Haojiaho heatsinks are solid copper. This material choice ensures effective passive cooling for various electronic devices without active fan noise.
Does Easycargo include thermal adhesive for installation?
Yes, the Easycargo kit includes pre-applied thermal tape. This feature simplifies the installation process by allowing you to stick the shims directly onto components. The tape ensures secure placement on laptop GPUs or VRAM chips. This eliminates the need for separate adhesives or complex mounting hardware during setup.
Is Haojiaho heatsink compatible with PS5 consoles?
The Haojiaho heatsink is suitable for M.2 SSDs found in PS5 consoles. Its dimensions allow it to fit standard 2280 form factor drives. The passive copper design helps manage heat during intensive gaming sessions. This makes it a practical option for expanding storage in Sony consoles while maintaining thermal efficiency.
What are the dimensions of the Easycargo shims?
Each Easycargo shim measures 15x15x0.5mm. This translates to 0.59 inches in width and length, with a thin 0.5mm profile. These small dimensions allow them to fit into tight spaces on compact electronics. The low height ensures they do not interfere with surrounding components or casing structures.
How heavy is the Haojiaho copper heatsink?
The Haojiaho heatsink weighs 1.01 ounces. This lightweight design ensures it does not add significant stress to M.2 slots. The compact size and moderate weight make it easy to handle during installation. It provides effective cooling without adding bulk to your storage device setup.