Easycargo 80mm Heatsink USB Fan Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This easycargo 80mm heatsink fan review covers a compact cooling solution designed for small form factor builds or auxiliary component cooling. The unit integrates an 80mm fan directly with a heatsink block, measuring 80mm by 80mm by 39mm. It relies on a dual ball bearing USB fan for airflow and uses pre-applied thermal conductive adhesive tape for mounting. This design eliminates the need for screws or brackets, making installation straightforward. The total weight is 197 grams, providing a stable base for heat dissipation in tight spaces where traditional air coolers cannot fit.
What stands out
- 80mm dual ball bearing USB fan for consistent airflow
- Compact dimensions of 80mm x 80mm x 39mm
- Pre-applied thermal conductive adhesive tape for tool-free mounting
- Lightweight design at 197 grams
Who it fits
Good fit for
You should consider this unit if you are building a mini-ITX or small form factor PC where space is extremely limited. It is also suitable for cooling specific components like VRMs or storage drives that require auxiliary airflow but lack standard fan headers. The USB connection makes it easy to power in systems without available motherboard fan connectors. If you need a low-profile, self-contained cooling block that sticks directly to a surface, this fits your setup.
Who should skip it
You should skip this if you need to cool a main CPU socket. This heatsink lacks a base designed for direct contact with CPU IHS and does not include mounting hardware for standard LGA or AM5 sockets. It is not a replacement for a tower air cooler or an AIO liquid cooler for primary processor cooling. Additionally, if you require high static pressure for dense radiator-like setups, the single 80mm fan may not provide sufficient force for your needs.
Verdict: This is a specialized cooling block for auxiliary components or tight spaces, not a primary CPU cooler. It offers a simple, adhesive-based solution for specific thermal management tasks.
Key specs explained
Fan Size: 80mm
This indicates the fan diameter is 80 millimeters. You get a smaller airflow volume compared to standard 120mm or 140mm CPU coolers. This size fits compact cases where larger fans do not fit. It is ideal for cooling small form factor builds or auxiliary components rather than high-end main CPUs. Compare this to larger fans if you need maximum heat dissipation for heavy workloads.
Dimensions: 80mmx80mmx39mm
The heatsink block measures 80 by 80 by 39 millimeters. This compact footprint allows installation in tight spaces inside small chassis. The low profile ensures it will not interfere with adjacent RAM modules or other components. You should check your case clearance before buying. Standard tower coolers are much taller and wider, so this is a specialized choice for space-constrained builds.
Mounting Type: Thermal Conductive Adhesive Tape
The unit uses adhesive tape instead of screws or clips to attach to the heat source. This simplifies installation significantly, requiring no tools or complex mounting hardware. It provides a direct thermal path for heat transfer. However, removal can be messy compared to traditional mechanical mounts. You should consider this convenience if you value easy setup over reversible mounting options found on premium air coolers.
Weight: 6.95 ounces
The total weight is approximately 197 grams. This light mass reduces stress on the mounted component and the surrounding case structure. It ensures the heatsink stays securely in place without sagging. This is particularly useful for delicate components that cannot support heavy cooling blocks. Compare this to large copper tower coolers that weigh several pounds and require robust mounting brackets for stability.
Compact Design and Physical Build
The listing describes a unified unit where the heatsink and fan are integrated. The block measures 80mm by 80mm by 39mm. This footprint is small enough for tight spaces. You can place it where standard coolers cannot fit. The total weight is 6.95 ounces. This light mass makes it easy to mount on light components without adding stress to the board.
Mounting relies on pre-applied thermal conductive adhesive tape. You do not need screws or brackets. This method sticks directly to a surface. It works well for VRMs or small chips. The fan is an 80mm dual ball bearing type. The bearing type suggests longer life than sleeve bearings. You get steady airflow from the 80mm diameter.
The unit is powered via USB. You do not need a motherboard header. This gives you flexible placement. You can connect it to a power bank or USB port on a device. The compact layout keeps the profile low. The 39mm height ensures it clears nearby parts. The build focuses on simplicity. You get a ready-to-use cooling solution without complex installation steps.
Setup and everyday use
Installing this unit relies entirely on the pre-applied thermal conductive adhesive tape. You do not need screws or brackets for the heatsink itself. This mounting method simplifies the process significantly. You simply peel the backing and press the heatsink onto your target surface. Ensure the area is clean and flat for proper adhesion. The fan connects via a standard USB interface. You can plug this into any available USB port on your computer or a powered hub. This provides the necessary power for the dual ball bearing fan without requiring additional cables or Molex connectors. The compact dimensions of 80mm by 80mm by 39mm allow for flexible placement. You can position it near small form factor components or auxiliary chips that need airflow. The 80mm fan size means it moves less air than larger coolers, but it fits where bigger units cannot. Daily operation is straightforward. The dual ball bearing mechanism suggests consistent performance over time, though you should monitor noise levels as the fan runs. The lightweight design at 6.95 ounces makes it easy to handle during installation. Just verify that the USB connection remains secure and the adhesive holds firmly under heat. This setup is ideal for users who need a simple, no-fuss cooling solution for specific components in tight spaces.
Before You Buy This Unit
This unit is not a standard CPU air cooler. It is a specialized auxiliary cooling solution. You should not replace your main processor cooler with this. Instead, use it for specific components like VRMs, NVMe drives, or small form factor chips. The 80mm fan size limits airflow. You must check your case space. The 39mm height is small, but you need clearance for the fan blades. The adhesive tape holds the heatsink. You must ensure the target surface is clean and flat. Dust accumulation on the small fins will reduce performance. You will need to clean it regularly with compressed air. This product fits into a niche. It does not compete with large tower coolers. It complements them by handling secondary heat sources. Verify your USB port availability. The fan draws power from USB. Ensure you have an available port near your target component. This is a practical add-on for tight builds.
Check before you buy
- Verify the 39mm height fits your case clearance.
- Confirm the target component surface is flat and clean.
- Check if you have an available USB port for power.
- Ensure the 80mm fan does not block other components.
- Decide if this auxiliary cooling suits your build needs.
The product at a glance
Easycargo 80mm Heatsink with USB Fan
Best for: compact spaces with adhesive mounting needs
- Fan Size
- 80mm
- Dimensions
- 80mmx80mmx39mm
- Mounting Type
- Thermal Conductive Adhesive Tape
- Features
- Fan, Thermal Tape
- Weight
- 6.95 ounces
View on Amazon: Easycargo 80mm Heatsink with USB Fan Affiliate link
This Easycargo unit combines a 80mm heatsink with a dual ball bearing USB fan. It measures 80mm by 80mm by 39mm and weighs 197 grams. The fan mounts using pre-applied thermal conductive adhesive tape rather than screws. You get a compact cooling solution that plugs into a USB port. This design suits users who need small form factor cooling without complex installation.
Pros
- Compact 80mm by 80mm by 39mm dimensions
- Dual ball bearing fan for durability
- Pre-applied thermal conductive adhesive tape included
- Lightweight build at 197 grams
Cons
- Adhesive mounting limits repositioning flexibility
- Small 80mm fan size restricts airflow capacity
- USB power dependency requires available port
Good fit if
- You need a compact cooling solution for tight spaces
- You prefer a simple adhesive installation over screws
- You require a lightweight heatsink fan combination
Skip if
- You need high airflow for heavy thermal loads
- You require screw-mounted stability for vibration
- You prefer standard fan sizes like 120mm or 140mm
Verdict: Easycargo 80mm Heatsink USB Fan fits users who need compact, adhesive-mounted cooling for low-to-medium thermal loads. It is a practical option for tight spaces where standard mounts do not fit.
Specifications side by side
| Spec | Easycargo 80mm Heatsink with USB Fan |
|---|---|
| Fan Size | 80mm |
| Dimensions | 80mmx80mmx39mm |
| Mounting Type | Thermal Conductive Adhesive Tape |
| Features | Fan, Thermal Tape |
| Weight | 6.95 ounces |
| Model | 8025FH01-USB |
Frequently asked questions
What are the exact dimensions of the Easycargo 80mm heatsink fan?
The unit measures 3.15 inches in width, 3.15 inches in length, and 1.54 inches in height. These compact dimensions allow it to fit into tight spaces where standard CPU coolers cannot. The small footprint makes it suitable for auxiliary cooling in small form factor builds or specific component cooling tasks.
How much does the Easycargo 80mm heatsink fan weigh?
The total weight is 6.95 ounces. This light weight is manageable for most mounting scenarios, though the adhesive method is the primary constraint. You do not need to worry about heavy mounting brackets or complex screw installations, as the unit relies on its pre-applied thermal tape for attachment.
Does the Easycargo heatsink include mounting hardware?
No, it does not include screws or brackets. The package includes the fan unit and pre-applied thermal tape. You simply peel the backing and press the heatsink onto your target surface. This adhesive mounting method simplifies installation for users who need a quick, tool-free solution for compact spaces.
What is the model number for this Easycargo fan?
The model number is 8025FH01-USB. This identifier confirms the specific 80mm fan size and USB power interface. It helps you verify compatibility with your power sources and ensures you are looking at the correct compact cooling solution for your auxiliary components or small form factor needs.
Is this heatsink suitable for high-end gaming CPUs?
No, it is not designed for high-end gaming CPUs. The verdict states it fits users with low-to-medium thermal loads. It is a practical option for tight spaces but lacks the capacity for heavy processing tasks. Use it for auxiliary components like VRMs or NVMe drives instead of your main processor.
What features are included with the Easycargo 80mm heatsink?
The listing specifies the inclusion of the fan and thermal tape. There are no additional features like RGB lighting or external controllers mentioned. The focus is purely on functional cooling through the integrated 80mm fan and direct thermal contact via the adhesive tape for straightforward, effective heat dissipation.