Easycargo 20-Piece Copper Aluminum Heatsink Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This easycargo 20pcs raspberry pi heatsink review covers a passive cooling kit for single-board computers. The set includes fifteen aluminum and five copper heatsinks designed for Raspberry Pi 5, 4, and 3 boards. Each unit measures 0.55 inches by 0.55 inches with a height of 0.28 inches. The defining feature is the pre-applied thermal conductive adhesive tape, which eliminates the need for screws or clips. This allows for quick installation on various chips, including VRAM, VGA, and MOSFETs. The kit provides a straightforward, low-profile solution for basic thermal management without complex mounting hardware.
What stands out
- Includes 15 aluminum and 5 copper heatsinks for mixed material cooling
- Pre-applied thermal conductive adhesive tape for easy installation
- Compatible with Raspberry Pi 5, 4, and 3 boards
- Low-profile dimensions of 0.55 x 0.55 x 0.28 inches
Who it fits
Good fit for
You should buy this kit if you are building multiple Raspberry Pi units and need a simple, reliable cooling method. The adhesive backing makes it ideal for users who want to avoid drilling holes or using screws. It is also suitable for technicians cooling other small components like RAM or chipsets where space is tight. If you need a bulk solution for several devices at once, this 20-piece set offers variety with both aluminum and copper options.
Who should skip it
You should skip this product if you require high-end thermal performance for overclocked hardware. The passive design and small surface area limit its effectiveness under heavy loads. If you need adjustable mounting options, the pre-applied tape does not allow for repositioning or removal without damage. Users looking for active cooling with fans should choose a different solution. This kit is strictly for low-to-medium heat dissipation needs.
Verdict: This kit offers a simple, adhesive-based cooling solution for Raspberry Pi boards and similar small chips. It is best for users who value ease of installation over maximum thermal performance.
Key specs explained for this kit
Material: Aluminum + Copper
This kit uses two distinct metals for heat dissipation. Aluminum heatsinks handle the majority of the thermal load efficiently. Copper units are included for areas needing higher conductivity. You benefit from this mix by matching material to heat intensity on your Raspberry Pi. When shopping for CPU air coolers, note that pure copper bases often outperform aluminum fins in density, but this hybrid approach offers balanced performance for small boards.
Mounting Type: Pre-applied adhesive tape backing
The heatsinks attach via thermal conductive adhesive tape rather than screws or clips. This simplifies installation on flat surfaces like Raspberry Pi chips. You avoid drilling or complex mounting brackets. This method suits users who want a quick, tool-free upgrade. Compare this to traditional CPU coolers that use retention brackets. Adhesive mounting is less secure for heavy loads but ideal for lightweight passive cooling on small form-factor computers.
Compatible Device: Raspberry Pi 5 4 3 boards
These heatsinks are sized and shaped specifically for Raspberry Pi models 3, 4, and 5. You get a direct fit for the main processor and other chips on these boards. This eliminates guesswork regarding dimensions. For CPU air coolers, compatibility is usually defined by socket type like LGA or AM4. Here, the compatibility is board-specific. Ensure your Pi model matches the listed versions for proper coverage and thermal contact.
Dimensions: 0.55 inches length, 0.55 inches width, 0.28 inches height
Each heatsink measures 0.55 by 0.55 inches with a height of 0.28 inches. This compact size fits the limited space on single-board computers. The low profile ensures it does not interfere with case closures or nearby components. When comparing to CPU air coolers, note that tower coolers are significantly larger. These small dimensions prioritize fit over massive surface area, making them suitable for passive cooling in tight enclosures.
Design and build details
The kit includes fifteen aluminum and five copper heatsinks. According to the listing, this mix allows you to match metal properties to specific components. Aluminum handles general heat dissipation efficiently. Copper units offer higher conductivity for areas requiring more intense cooling. You can apply these to Raspberry Pi boards or other devices like VRAM, VGA RAM, and IC chips.
Each heatsink measures 0.55 inches in length and width, with a height of 0.28 inches. The total weight is 0.64 ounces for the entire set. These dimensions make them suitable for compact single-board computers. The low profile ensures they fit within standard cases without interfering with other hardware. The multicolored appearance reflects the two different materials used.
Mounting is handled via pre-applied thermal conductive adhesive tape. This backing simplifies installation by removing the need for screws or clips. You simply peel and stick the units to the target surface. This method works well for flat surfaces on Raspberry Pi 5, 4, and 3 boards. It also suits flat components like Mosfet, SCR, Southbridge, and Northbridge chips. The design prioritizes ease of use and compact form factor for passive cooling applications.
Setup and everyday use
Setup is straightforward because the kit uses pre-applied thermal conductive adhesive tape. You do not need to apply separate thermal paste or use screws. The listing states the backing is already attached to each heatsink. You simply peel the protective layer and press the unit onto the target component. This method works well for flat surfaces on Raspberry Pi boards. The compatible devices are listed as Raspberry Pi 5, 4, and 3 boards. You can also apply these units to other chips like VRAM, VGA RAM, IC chips, Mosfet, SCR, Southbridge, and Northbridge. The physical dimensions are small. Each heatsink measures 0.55 inches in length and width, with a height of 0.28 inches. This compact size allows you to install them on various components without blocking nearby parts. The total weight of the 20-piece set is 0.64 ounces. This light weight means you do not need to worry about stress on the board from heavy cooling hardware. The mix of fifteen aluminum and five copper units lets you choose the right material for each chip. Aluminum handles general heat dissipation. Copper offers higher conductivity for specific hot spots. Daily use involves passive cooling. No fans or external power sources are required. The adhesive holds the heatsink in place during normal operation. You should ensure the surface is clean before application for best results. The kit does not include the Raspberry Pi board itself. You need to purchase the board separately to complete your setup.
Before You Buy This Kit
You should verify that your Raspberry Pi model matches the listed compatibility. The listing specifies support for Raspberry Pi 5, 4, and 3 boards. You must ensure the physical dimensions of the chips on your board align with the 0.55-inch by 0.55-inch footprint of these heatsinks. Since the kit uses adhesive tape, you need a clean, dry surface for proper bonding. Dust accumulation on passive fins can reduce efficiency over time. You may need to periodically clean the aluminum and copper surfaces with compressed air to maintain performance. This kit serves as a passive cooling solution. It fits into the broader category of CPU Air Coolers and Thermal Paste guides as a low-profile, non-fan option. You do not need thermal paste for installation, but you should check if your specific chip layout allows for full coverage. The mix of aluminum and copper provides a balanced approach to heat dissipation for single-board computers.
Check before you buy
- Confirm compatibility with your specific Raspberry Pi model.
- Check chip dimensions against the 0.55-inch heatsink size.
- Ensure surfaces are clean for adhesive bonding.
- Verify thermal tape coverage matches your component layout.
The product at a glance
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
Best for: Cooling multiple chips on Raspberry Pi boards
- Material
- Aluminum + Copper
- Compatible Device
- Raspberry Pi 5 4 3 boards
- Mounting Type
- Pre-applied adhesive tape backing
- Features
- Thermal Tape
- Dimensions
- 0.55 × 0.55 × 0.28 inches
- Weight
- 0.64 ounces
View on Amazon: Easycargo 20-Piece Copper and Aluminum Heatsink Kit Affiliate link
This kit includes 20 heatsinks for Raspberry Pi 5, 4, and 3 boards. You get 15 aluminum and 5 copper pads. Each unit measures 0.55 by 0.28 inches and weighs 0.64 ounces. The adhesive backing is pre-applied for simple installation. This set helps cool various chips like VRAM and MOSFETs. It suits users who need multiple cooling points for their single-board computers.
Pros
- Includes 15 aluminum and 5 copper heatsinks
- Pre-applied thermal conductive adhesive tape
- Compatible with Raspberry Pi 5, 4, and 3
- Compact size of 0.55 inches
Cons
- Raspberry Pi board not included
- Limited to specific chip types
- Adhesive mounting limits repositioning
Good fit if
- You need to cool multiple components on a Pi board
- You want a mix of aluminum and copper materials
- You prefer pre-applied adhesive for easy installation
Skip if
- You are looking for a single large cooler
- You need a cooler for a desktop CPU
- You want to reuse heatsinks on different devices
Verdict: Easycargo 20-Piece Heatsink Kit offers a practical mix of aluminum and copper pads for Raspberry Pi users. It fits those who need to cool several chips on their board without complex mounting.
Specifications side by side
| Spec | Easycargo 20-Piece Copper and Aluminum Heatsink Kit |
|---|---|
| Material | Aluminum + Copper |
| Compatible Device | Raspberry Pi 5 4 3 boards |
| Mounting Type | Pre-applied adhesive tape backing |
| Features | Thermal Tape |
| Dimensions | 0.55 × 0.55 × 0.28 inches |
| Weight | 0.64 ounces |
| Color | Multicolored (20pcs) |
Frequently asked questions
Does the Easycargo kit include thermal paste?
No, the kit does not include separate thermal paste. It relies on pre-applied thermal tape for installation. This adhesive backing is already attached to each heatsink. You simply peel the protective layer and press the unit onto the chip. This design eliminates the need for messy paste application or additional tools.
What is the height of these heatsinks?
Each heatsink in the kit has a height of 0.28 inches. The width and length are both 0.55 inches. These compact dimensions allow the units to fit over small chips on Raspberry Pi boards. The low profile ensures they do not interfere with nearby components or case closures.
How many heatsinks are in the 20-piece set?
The set contains twenty heatsinks in total. The listing specifies that fifteen are made of aluminum and five are made of copper. This mix allows you to place higher-conductivity copper units on components that generate more heat. The remaining aluminum units handle general thermal dissipation efficiently.
Is this kit compatible with Raspberry Pi 5?
Yes, the product listing specifies support for the Raspberry Pi 5. It is also compatible with Raspberry Pi 4 and Raspberry Pi 3 boards. You should verify that the physical dimensions of the chips on your specific board align with the 0.55-inch size of the heatsinks before installation.
Do I need screws to install these?
No, you do not need screws for installation. The heatsinks use a self-adhesive thermal tape backing. This feature simplifies the setup process significantly. You only need to peel off the protective film and press the heatsink firmly onto the target component. This method is ideal for users who want a quick, tool-free upgrade.
What is the total weight of the kit?
The entire 20-piece kit weighs 0.64 ounces. This lightweight design adds minimal mass to your Raspberry Pi setup. The low weight is manageable even when attaching multiple units to different chips. It ensures that the adhesive backing can securely hold each heatsink in place without risk of falling off.
Can I use these on other single-board computers?
The product attributes list compatibility specifically with Raspberry Pi devices. The dimensions are optimized for the chip layouts found on Pi 3, 4, and 5 boards. While they may physically fit other small chips, the listing does not guarantee compatibility with other single-board computers. You should stick to the specified devices for best results.