Easycargo 15x15x0.5mm Copper Shims 20-Pack Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This easycargo 20pcs heatsink copper pad review covers a simple thermal accessory. You get twenty copper shims designed to bridge gaps between heat sources and cooling surfaces. The defining specs are their 15x15mm square footprint and 0.5mm thickness. Each shim comes with a pre-applied 3M 8810 thermal conductive adhesive tape backing. This allows you to stick them directly to components without extra glue. They are intended for passive cooling applications on laptops, GPUs, and VRAM chips. The material is pure copper, which offers good thermal conductivity for its size.
What stands out
- Material is solid copper for efficient heat transfer
- Dimensions are exactly 15x15x0.5mm
- Includes 3M 8810 thermal conductive adhesive tape
- Pack contains 20 individual shims
- Designed for passive cooling on ICs and GPUs
Who it fits
Good fit for
These shims suit builders who need to fill small gaps between a heatsink and a component. If your laptop GPU or VRAM chips sit slightly below the cooling plate, the 0.5mm thickness helps make contact. The pre-applied 3M 8810 adhesive makes installation quick and clean. You do not need to buy separate thermal tape. This is practical for PC modders or laptop repair technicians who want to improve passive cooling performance on specific integrated circuits without complex mounting hardware.
Who should skip it
You should look elsewhere if you need active cooling solutions. These shims only work for passive cooling setups. They are not suitable for large desktop CPU coolers that require heavy pressure. The 15x15mm size is quite small, so they will not cover large processor dies. If you are looking for a complete cooling solution rather than a gap-filler, this product will not help. They are also not designed for high-vibration environments where adhesive might fail without additional mechanical retention.
Verdict: This is a straightforward gap-filling shim for specific passive cooling needs. It fits users who need precise thickness and adhesive backing for small components.
Key specs explained for shims
Material: Copper
Copper offers high thermal conductivity, allowing heat to move quickly from the component to the cooler. This is essential for maintaining stable temperatures in laptops and desktops. When comparing to other accessories, copper is generally superior to aluminum for heat transfer. You should choose copper if you need efficient passive cooling for VRAM or chipset areas where heat buildup is a concern.
Dimensions: 15x15x0.5mm
The 15x15mm square shape fits standard component footprints, while the 0.5mm thickness bridges small gaps. This precise size ensures coverage without excessive overhang. For buyers, this means you can target specific hotspots like memory chips. When shopping for air coolers, note that these shims are for gap filling, not primary heat dissipation like a large heatsink.
Mounting Type: Pre applied adhesive tape backing
The pre-applied 3M 8810 tape simplifies installation by eliminating the need for separate thermal adhesives. This reduces mess and ensures consistent contact pressure. You benefit from a cleaner setup process, especially in tight laptop spaces. Compare this to screw-mounted coolers; shims offer a simpler, low-profile solution for auxiliary components that do not require heavy mechanical retention.
Cooling Method: Passive
Passive cooling relies on natural convection and conduction without fans. This shim transfers heat to a surface that may be cooled by airflow. It is ideal for components that do not generate excessive heat on their own. When looking at air coolers, remember that shims assist the primary cooling system rather than replacing it, making them a supplementary accessory for thermal management.
Design and build details
The listing describes these shims as solid copper pads. Copper is a dense metal with high thermal conductivity. This material choice allows heat to transfer rapidly from the component to the cooler. You get twenty pieces in the pack. Each shim measures 15x15mm with a thickness of 0.5mm. This small footprint fits most laptop GPUs, CPUs, and VRAM chips. The 0.5mm thickness bridges small gaps between the heat source and the heatsink base. It ensures better contact without adding significant height.
Mounting relies on a pre-applied 3M 8810 thermal conductive adhesive tape. This backing sticks directly to the component surface. You do not need separate screws or clips. The adhesive holds the shim in place while conducting heat. This design suits passive cooling setups in laptops and small form factor PCs. The copper tone finish is standard for bare metal. There are no moving parts or controls. The layout is static. You place the shim where the gap exists. The adhesive secures it. This simple build focuses entirely on thermal bridging. It does not include fans or pumps. It is a passive solution for filling space and improving heat flow.
Setup and everyday use guide
Installation relies on the pre-applied 3M 8810 thermal conductive adhesive tape. You do not need to apply separate thermal paste or use additional mounting hardware. The adhesive backing allows you to position the shim directly against the heat source. This simplifies the process significantly compared to shims that require manual paste application.
The 15x15mm square footprint and 0.5mm thickness determine where you can place the product. You must ensure the target surface is flat and clean before peeling the backing. The shim bridges the gap between the component and the cooling solution. This setup is designed for passive cooling environments. It works with laptop GPUs, CPUs, VRAM, and chipset ICs.
Daily use involves the shim maintaining thermal contact. The copper material conducts heat away from the chip and into the cooler or chassis. Since the product is for passive cooling, it does not have fans or active components. It sits statically between parts. The 0.5mm thickness is critical for filling specific gaps without interfering with surrounding components. You should verify that the shim fits within the available space on your laptop or motherboard. The adhesive remains in place during normal operation. It does not require maintenance or adjustment after initial installation. This accessory is strictly for bridging thermal gaps in compact electronic devices.
Before You Buy These Shims
You should verify that your target component matches the 15x15mm footprint before purchasing. These shims are strictly for passive cooling applications, such as laptop GPUs, VRAM, or chipset ICs. They are not designed to replace active CPU air coolers. You will need to ensure the adhesive backing adheres properly to your specific surface material. Regular inspection of the bond is recommended, as thermal cycling can weaken adhesive over time. This product serves as a supplementary thermal bridge rather than a primary cooling solution. It fits best in builds where space is limited and direct contact is impossible. Do not expect it to lower temperatures significantly on its own. It works alongside other thermal accessories to fill gaps. Check your component’s heat spreader size carefully. Ensure the 0.5mm thickness does not interfere with surrounding components or casing. This is a niche item for specific thermal bridging needs.
Check before you buy
- Verify component surface is 15x15mm or smaller
- Confirm passive cooling application only
- Check adhesive compatibility with your surface
- Ensure 0.5mm thickness fits your case
The product at a glance
Easycargo 15x15x0.5mm Copper Shims 20-Pack
Best for: fine-tuning thermal pad height on laptops
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- Laptop GPU CPU IC Chips VGA RAM
- Dimensions
- 15x15x0.5mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link
You get 20 copper shims measuring 15x15x0.5mm for passive cooling applications. Each pad features a pre-applied 3M 8810 thermal conductive adhesive tape. This design allows for direct mounting to laptop GPUs, CPUs, VRAM, and chipset ICs. The copper material helps spread heat efficiently across small surface areas. You should use these when standard thermal pads are too thick or when precise height adjustment is required for compact electronics.
Pros
- Copper material for heat spreading
- 15x15x0.5mm precise dimensions
- Pre-applied 3M 8810 adhesive tape
- Suitable for passive cooling
Cons
- Small 15x15mm footprint limits coverage
- Only 0.5mm thickness restricts gap filling
- Requires manual cutting for non-standard sizes
Good fit if
- You need to reduce thermal pad height
- You are repairing laptop GPU or CPU areas
- You require precise copper heat spreading
Skip if
- You need to cover large surface areas
- You require high airflow active cooling
- You cannot apply adhesive tape safely
Verdict: Easycargo 15x15x0.5mm Copper Shims fits technicians who need to fine-tune thermal pad height on laptop components. You should buy these if you are working on small IC chips or VRAM modules where standard pads are too bulky.
Specifications side by side
| Spec | Easycargo 15x15x0.5mm Copper Shims 20-Pack |
|---|---|
| Material | Copper |
| Cooling Method | passive |
| Compatible Device | Laptop GPU CPU IC Chips VGA RAM |
| Dimensions | 15x15x0.5mm |
| Mounting Type | Pre applied adhesive tape backing |
| Features | Thermal Tape |
| Length | 0.59 inches |
| Width | 0.59 inches |
| Size | 15x15x0.5mm |
| Color | Copper Tone |
| Model | NA |
Frequently asked questions
What is the exact size of the Easycargo copper shims?
Each shim measures 15x15x0.5mm. This translates to a square footprint of 0.59 inches by 0.59 inches. The thickness is strictly 0.5mm. You must verify that your component matches this 15mm by 15mm area before applying the shim. The fixed dimensions mean these pads only fit specific surface areas.
What material are these thermal pads made of?
The shims are made of copper. Copper provides high thermal conductivity, moving heat quickly from the component to the cooler. This material is denser and more efficient than aluminum for this specific application. The copper tone finish is visible, but the metal composition is the primary functional factor for heat transfer.
Do these shims come with adhesive?
Yes, they feature pre-applied thermal conductive adhesive tape. You do not need to buy separate thermal paste or mounting hardware for installation. The adhesive allows you to stick the shim directly onto the heat source. This simplifies the process for technicians working on small IC chips or VRAM modules in laptops.
Are these shims suitable for desktop CPU coolers?
No, they are not designed for active CPU air coolers. These shims are intended for passive cooling applications. They are best suited for fine-tuning thermal pad height on laptop components like GPUs or chipset ICs. Using them on a standard desktop CPU cooler would not provide the necessary structural support or contact area.
How many shims are included in the pack?
The package contains twenty copper shims. This quantity allows you to work on multiple components or replace failed pads without buying new stock. The 20-pack format is practical for technicians who need to service several laptop modules or spare parts in a single session. Each piece is identical in size and specification.
Can I use these shims for RAM modules?
Yes, the product is compatible with RAM modules. They are designed to fit small IC chips where standard thermal pads might be too bulky. The 0.5mm thickness helps bridge gaps between the memory chips and the cooling solution. Ensure the RAM chip surface area aligns with the 15x15mm footprint for proper heat transfer.