Easycargo 124-Piece Multi-Size Aluminum Copper Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This easycargo 124pcs heatsink kit 9 review covers a universal assortment box designed for small electronic components. It includes 124 pieces in nine different sizes, combining aluminum and copper materials for effective heat dissipation. The kit features pre-applied 3M 8810 thermal conductive adhesive tape for easy installation. You get a mix of black anodized, green anodized, and silvertone aluminum heatsinks, along with low-profile copper pads. This variety allows you to cool various devices like Raspberry Pi 4, M.2 SSDs, and PS5 components without needing complex mounting hardware.
What stands out
- 124 pieces in 9 distinct sizes for versatile application
- Combination of aluminum and copper materials for thermal performance
- Pre-applied 3M 8810 thermal conductive adhesive tape
- Includes low-profile copper shim heatsinks for tight spaces
- Covers multiple device types including GPU, RAM, and MOSFET
Who it fits
Good fit for
You should consider this kit if you work with small form-factor builds or repair electronics that require precise cooling solutions. The wide range of sizes, from 9mm x 9mm to 15mm x 15mm, suits Raspberry Pi 4, M.2 SSDs, and PS5 components. The pre-applied tape simplifies installation on VRM, VRAM, and CPU chips. If you need a versatile stock of heatsinks for various small ICs and laptop components, this assortment provides the necessary dimensions and materials.
Who should skip it
You should look elsewhere if you need a single large cooler for a high-TDP desktop CPU. This kit is designed for small components, not main processors. The adhesive tape mounting is not suitable for heavy, high-vibration environments. You also need to verify compatibility, as the data does not mention compatibility with standard tower coolers or large GPU backplates. The low-profile copper pads are thin and may not suffice for high-heat sources requiring substantial thermal mass.
Verdict: This kit offers a practical assortment of small heatsinks with pre-applied tape for various electronic cooling needs. It is ideal for builders working with Raspberry Pi, SSDs, and other small components.
Key specs explained for this kit
Material: Aluminum and Copper
This kit combines two metals with different thermal properties. Aluminum is lightweight and cost-effective, while copper conducts heat faster. You get a mix of both to handle various heat loads. When shopping for CPU air coolers, you will see larger copper heat pipes or aluminum fins. This assortment lets you choose the right metal for small chips without buying separate packs.
Mounting Type: Pre-applied 3M 8810 adhesive tape
The heatsinks arrive with thermal adhesive already attached. This simplifies installation by removing the need to buy separate tape. You simply peel and stick the unit to the component. For CPU air coolers, you will use screws or clips for heavy loads. This tape method is ideal for light-duty components like RAM or SSDs where mechanical pressure is not required.
Compatible Device: Raspberry Pi 4, M.2 SSD, PS5
These heatsinks are sized for small electronic devices rather than large processors. You can attach them to single-board computers, storage drives, or gaming consoles. Standard CPU air coolers are too bulky for these spaces. This kit provides low-profile solutions that fit in tight enclosures. It ensures your small components stay cool without interfering with other hardware or case dimensions.
Model: 124-HK
This model number identifies the specific 124-piece assortment. It tells you exactly how many pieces and sizes are included in the box. When comparing CPU air coolers, you look at specific model names for performance data. Here, the model number confirms you are getting a variety pack. It helps you verify you have received the correct multi-size kit for your diverse cooling needs.
Design and build details
The listing describes this kit as a universal assortment box containing 124 pieces across nine distinct sizes. You receive a mix of aluminum and copper materials. Aluminum provides a lightweight option that is cost-effective, while copper offers faster thermal conductivity. This combination allows you to select the right metal for specific heat loads on components like Raspberry Pi 4, M.2 SSDs, or PS5 chips.
Mounting relies on pre-applied 3M 8810 thermal conductive adhesive tape. This method eliminates the need for screws or clips, simplifying installation on small ICs, VRAM, or MOSFETs. The heatsinks come in various finishes, including black anodized aluminum, green anodized aluminum, and silvertone aluminum. These finishes help with corrosion resistance and visual identification of sizes. The low-profile copper pads are notably thin at 0.02 inches, fitting into tight spaces where standard fins would not.
According to the listing, the overall weight is 5.93 ounces, and the largest units measure 0.56 inches in width and length. The layout includes specific counts for each size, ranging from 9mm x 9mm squares to 14mm x 14mm blocks. This variety ensures you have the correct footprint for different component types. The design prioritizes versatility over specialized high-performance cooling, making it suitable for general electronics maintenance rather than high-end CPU air cooling.
Setup and everyday use
Setting up this kit is straightforward because the mounting method is built in. Each heatsink comes with pre-applied 3M 8810 thermal conductive adhesive tape. You do not need screws, brackets, or separate thermal pads. You simply peel the backing off the tape and press the heatsink onto your component. This makes installation fast and clean. The adhesive ensures the metal stays in place without additional hardware. This is ideal for tight spaces where drilling holes is not possible.
The variety of sizes means you can find a fit for many devices. The list specifies compatibility with Raspberry Pi 4, M.2 SSDs, and PS5 consoles. You can also use it on VRM, VRAM, RAM, and small IC chips. The kit includes nine different sizes, ranging from large 14mm by 14mm blocks to tiny 9mm by 9mm squares. There are also low-profile copper shims that are only 0.02 inches thick. This allows you to cool small MOSFETs or laptop components without adding bulk.
In daily use, you pick the size that matches the heat source. The mix of aluminum and copper lets you balance weight and conductivity. Aluminum parts are lighter, while copper parts handle heat transfer faster. You can swap sizes as your project changes. The kit is lightweight, weighing only 5.93 ounces. This makes it easy to store and carry for various electronics projects.
Before you buy this kit
This assortment is not a replacement for a standard CPU air cooler. It is designed for small components like M.2 SSDs, Raspberry Pi chips, or VRM MOSFETs. You must check the surface area of your target device. The largest heatsinks measure 14mm by 14mm. This size is insufficient for high-TDP processors. You should verify that your component has a flat surface for the adhesive tape to bond properly. Rough or curved surfaces will reduce thermal transfer. The kit includes copper shims for very low-profile needs, but these have minimal height. You will need to clean the surface with isopropyl alcohol before application. Ensure the adhesive tape remains intact during shipping. This kit fits best in a build where you need to cool multiple small chips simultaneously, such as a custom PC or a console mod. It does not replace the need for a proper tower cooler on your main CPU. Keep it in mind for auxiliary cooling tasks only.
Check before you buy
- Verify the target component surface is flat and clean
- Confirm the 14mm max heatsink size suits your chip
- Check if you need auxiliary cooling for SSDs or VRMs
- Ensure the adhesive tape is not damaged in the box
The product at a glance
Easycargo 124-Piece Multi-Size Aluminum and Copper Kit
Best for: Small electronics and component cooling
- Material
- Aluminum and Copper
- Compatible Device
- Raspberry Pi 4, M.2 SSD, PS5
- Mounting Type
- Pre-applied 3M 8810 adhesive tape
- Features
- Thermal Tape
- Length
- 0.56 inches
- Width
- 0.56 inches
View on Amazon: Easycargo 124-Piece Multi-Size Aluminum and Copper Kit Affiliate link
This kit provides 124 pre-applied heatsinks in nine sizes for cooling small ICs, RAM, and SSDs. It uses 3M 8810 thermal adhesive tape for mounting. The assortment includes aluminum and copper materials to suit different thermal needs. You get a wide range of dimensions, from 5mm to 8mm height. This set is ideal for Raspberry Pi, PS5, and laptop repairs where space is tight.
Pros
- Includes 124 heatsinks in 9 different sizes
- Pre-applied 3M 8810 thermal adhesive tape
- Combines aluminum and copper materials
- Covers dimensions from 5mm to 8mm height
Cons
- Lowest profile is only 0.02 inch thick
- Adhesive tape limits repositioning during installation
- No mounting hardware included for larger components
Good fit if
- You need to cool multiple small chips at once
- You work on Raspberry Pi or PS5 projects
- You require pre-applied thermal tape for speed
Skip if
- You are cooling a standard desktop CPU
- You need heavy-duty heat dissipation
- You prefer screw-mounted heatsinks
Verdict: Easycargo 124-Piece Heatsink Kit is a practical assortment for electronics hobbyists. It fits you if you are building or repairing devices like Raspberry Pi or PS5 that need small, varied cooling solutions.
Specifications side by side
| Spec | Easycargo 124-Piece Multi-Size Aluminum and Copper Kit |
|---|---|
| Material | Aluminum and Copper |
| Compatible Device | Raspberry Pi 4, M.2 SSD, PS5 |
| Mounting Type | Pre-applied 3M 8810 adhesive tape |
| Features | Thermal Tape |
| Length | 0.56 inches |
| Width | 0.56 inches |
| Weight | 5.93 ounces |
| Model | 124-HK |
Frequently asked questions
What components does this kit cool?
It is designed for small electronics and component cooling. The compatible devices include GPUs, laptops, RAM, PS5 units, VRMs, and Raspberry Pi. You should use it for parts that need varied, small-scale cooling solutions rather than large processors.
Is there thermal paste included?
The kit does not include loose thermal paste. Instead, it features pre-applied thermal tape. Each heatsink comes with 3M 8810 thermal conductive adhesive tape already attached. You simply peel the backing and stick it to your target component.
What materials are the heatsinks made of?
The assortment combines aluminum and copper materials. Aluminum is lightweight and cost-effective, while copper conducts heat faster. You get a mix of both metals to handle various heat loads on different electronic components effectively.
How many sizes are in the box?
The box contains 124 pieces across nine distinct sizes. This variety allows you to match the heatsink dimensions to your specific component. The largest heatsinks are suitable for larger surfaces, while smaller ones fit tight spaces.
Does it require screws for mounting?
No screws or brackets are needed for installation. The mounting method is built in via the pre-applied adhesive tape. You do not need separate thermal pads or complex hardware. Just peel the backing and apply the heatsink directly.
Can I use this for a main CPU?
This kit is not a replacement for a standard CPU air cooler. It is intended for small components like M.2 SSDs, Raspberry Pi chips, or VRM MOSFETs. You must check the surface area of your target device to ensure proper fit.
What is the weight of the kit?
The total weight of the 124-piece kit is 5.93 ounces. The individual dimensions are listed as 0.56 inches in width and length for the base units. This lightweight design makes it easy to handle during assembly.