Easycargo 100pcs 12 sizes 15mm Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for easycargo 100pcs 12 sizes 15mm alternatives because the original kit offers broad thickness versatility for precision gap filling. Its C1100 copper build ensures high heat conduction where precise clearance is required. This assortment includes 100 pieces in 12 different thicknesses, ranging from 0.1mm to 2mm. The 15mm x 15mm dimensions make it suitable for small computing hardware like GPUs, RAM, and M.2 SSDs.
However, you might need a different spec, size, or feature. Some projects require wider 20mm pads or specific adhesive backing. Others may need flat heat pipes for directional cooling or graphite-coated surfaces for passive SSD dissipation. The 6 similar picks compared here were chosen because their specifications overlap with the original product. Each alternative targets a specific thermal need, whether that is uniform gap filling, wide component cooling, or targeted heat transfer in tight spaces. You can select the option that best matches your hardware requirements.
Our top pick: Easycargo 100-Piece 15mm Copper Shim Kit.
How alternatives compare to Easycargo
Easycargo 20mm Copper Pad Shim Kit
The Easycargo 20mm Copper Pad Shim Kit replaces the 15mm footprint with a wider 20mm surface area. This change suits components that exceed the original 0.6-inch width. It offers six thickness options instead of twelve, reducing your ability to fine-tune exact gaps. The material remains pure C1100 copper with 401W/mK conductivity. You lose the variety of the 100-piece assortment but gain coverage for broader thermal pads. Pick this if your GPU or VRM heat spreader requires a larger contact surface than the original kit provides.
Easycargo 15x15x0.5mm Copper Shims 20-Pack
The Easycargo 15x15x0.5mm Copper Shims 20-Pack focuses on a single 0.5mm thickness rather than a diverse range. It includes 3M adhesive backing, which the original kit lacks in its standard version. This adhesive simplifies installation on flat surfaces like RAM or SSDs. You sacrifice the ability to adjust for varying gap sizes by sticking to one uniform plate. The copper material and 15mm dimensions match the original. Choose this option when you need a secure, pre-glued solution for a known 0.5mm clearance without searching through multiple thicknesses.
GeeekPi 102-Piece Aluminum and Copper Heatsink Kit
The GeeekPi 102-Piece Aluminum and Copper Heatsink Kit shifts from flat shims to extruded heatsinks. It combines aluminum and copper materials, offering different thermal properties than the pure copper original. The kit includes thermal adhesive for easy mounting on Raspberry Pi boards or small electronics. You give up the low-profile gap-filling nature of the original shims for increased surface area dissipation. This alternative is better for active heat spreading rather than filling tight spaces. Select this if your goal is to cool larger components like VRMs or CPUs where height is not a constraint.
Bopaodao 120mm Flat Copper Heat Pipe
The Bopaodao 120mm Flat Copper Heat Pipe introduces a flat, directional heat transfer method unlike the original static shims. Its 120mm length and 2mm thickness allow it to bridge gaps across longer distances. This design moves heat away from a hot spot to a cooler area, rather than just conducting it through a small pad. You lose the versatility of multiple thicknesses and the compact 15mm footprint. This option is ideal for slim enclosures where traditional shims cannot reach the heatsink. Pick this if your component needs heat redirected laterally rather than vertically.
Bopaodao 5mm x 90mm Copper Heat Pipe
The Bopaodao 5mm x 90mm Copper Heat Pipe offers a compact, fluid-assisted passive cooling solution. Its 90mm length and 5mm diameter provide a different thermal pathway compared to the original flat copper pads. This pipe redirects heat along its axis, useful for tight spaces where flat shims cannot make contact with a sink. You sacrifice the multi-thickness assortment for a specialized heat transport tool. The pure copper material ensures efficient transfer. Choose this alternative when you need to move heat from a small IC chip to a larger area that is out of reach for standard shims.
JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink
The JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink targets M.2 SSDs specifically, unlike the general-purpose original kit. It features a 2mm thickness with a graphite coating to enhance surface radiation. The pure copper base provides steady thermal performance for passive cooling. You lose the variety of sizes and thicknesses, focusing instead on a single 70x20mm form factor. This heatsink is designed to clamp over an SSD rather than fill a gap. Select this if your primary need is cooling an M.2 NVMe drive where the original shims would not fit or function effectively.
Quick picks
Our 7 picks
Easycargo 100-Piece 15mm Copper Shim Kit
Best for: precision thermal gap filling on small electronics
- Material
- Copper C1100
- Compatible Device
- PC, Laptop GPU, CPU, M.2 NVMe SSD
- Length
- 0.6 inches
- Width
- 0.6 inches
View on Amazon: Easycargo 100-Piece 15mm Copper Shim Kit Affiliate link
This kit provides 100 copper shims sized at 15mm by 15mm to bridge thermal gaps. Each shim uses C1100 copper rated for 401W/mK thermal conductivity. You get 12 different thicknesses spanning from 0.1mm up to 2.0mm. It suits you if you need precise thermal spacing across components like laptop GPUs, VRAM, RAM, or M.2 NVMe SSDs where standard thermal pads do not fit exact gap depths.
Pros
- C1100 pure copper construction with 401W/mK thermal conductivity
- 12 distinct thicknesses ranging from 0.1mm to 2mm
- 100 total pieces included in a single kit
- Available in styles with glue or without glue
Cons
- Fixed 15mm by 15mm footprint cannot cover larger surface areas
- Contains only three pieces of the thickest 2mm size
Good fit if
- You need multiple thickness options from 0.1mm to 2mm to fill exact thermal gaps.
- You are cooling small flat components such as laptop GPUs, VRAM, or M.2 SSDs.
Skip if
- You require larger contact plates than 15mm by 15mm.
- You need a high quantity of 2mm shims, as the kit includes only three.
Verdict: Easycargo 15mm Copper Shim Assortment Kit delivers broad thickness versatility for precision gap filling across small computing hardware. Its C1100 copper build ensures high heat conduction where precise clearance is required.
Easycargo 20mm Copper Pad Shim Kit
Best for: wide 20mm component thermal gap filling
- Material
- Pure Copper C1100
- Compatible Device
- CPU, GPU, VGA, RAM, VRM, PS5 SSD
- Dimensions
- 20mm x 20mm
- Weight
- 4.66 ounces
View on Amazon: Easycargo 20mm Copper Pad Shim Kit Affiliate link
This assortment contains 40 pure C1100 copper shims sized at 20mm by 20mm. You get six thickness options ranging from 0.3mm to 1.5mm to help bridge gaps between components and heatsinks. With a rated thermal conductivity of 401W/mK, it suits you if you need wider contact coverage for laptop GPUs, VRMs, or M.2 NVMe SSDs where smaller 15mm pads leave exposed margins on hot surfaces.
Pros
- Pure C1100 copper construction with 401W/mK thermal conductivity
- Larger 20mm x 20mm footprint for broader surface contact
- Six thickness options from 0.3mm up to 1.5mm
- Includes 40 pieces across all sizes
Cons
- No pre-applied adhesive backing included
- Provides fewer total thickness increments than 12-size assortments
- 20mm width does not fit components requiring smaller 15mm pads
Good fit if
- You need 20mm x 20mm surface coverage rather than standard 15mm sizes.
- You require thermal gap filling with 401W/mK thermal conductivity.
- You want multiple thickness choices between 0.3mm and 1.5mm.
Skip if
- You need shims sized for compact 15mm x 15mm component footprints.
- You require pre-applied thermal adhesive tape.
- You need more than six thickness options in a single pack.
Verdict: Easycargo 20mm Pure Copper Pad Shim Kit provides high 401W/mK thermal conductivity across six thickness options for wider cooling gaps. It is a solid choice when standard 15mm shims are too small for your components.
Easycargo 15x15x0.5mm Copper Shims 20-Pack
Best for: uniform 0.5mm gap passive chip cooling
- Material
- Copper
- Cooling Method
- passive
- Compatible Device
- Laptop GPU CPU IC Chips VGA RAM
- Dimensions
- 15x15x0.5mm
- Mounting Type
- Pre applied adhesive tape backing
- Features
- Thermal Tape
View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link
The Easycargo 15x15x0.5mm Copper Shims with 3M Tape set provides 20 pure copper shims designed for passive heat transfer. Each piece measures 15x15mm with a 0.5mm profile, suitable for laptop GPUs, CPUs, RAM, and IC chipsets. Pre-applied 3M 8810 thermal conductive tape secures the shims directly in place without extra paste. This pack suits you if you have a known 0.5mm gap and want a fast peel-and-stick installation.
Pros
- Includes 20 pure copper shims measuring 15x15x0.5mm
- Pre-applied 3M 8810 thermal conductive adhesive tape backing
- Provides passive cooling for laptop GPUs, CPUs, RAM, and IC chips
Cons
- Includes only a single 0.5mm thickness
- Limited to one 15x15mm square footprint
- Contains 20 pieces rather than a varied multi-size assortment
Good fit if
- You need 15x15mm copper shims with adhesive tape attached.
- You require an exact 0.5mm thickness for your thermal gap.
- You want passive cooling plates for laptop GPUs, RAM, or IC chips.
Skip if
- You need multiple thickness options to test unknown clearance heights.
- You require heatsinks larger than 15x15mm.
Verdict: Easycargo 15x15x0.5mm Copper Shims with 3M Tape delivers 20 uniform copper plates with adhesive backing for straightforward passive chip cooling. It works well when you know your component gap measures exactly 0.5mm.
GeeekPi 102-Piece Aluminum and Copper Heatsink Kit
Best for: cooling Raspberry Pi boards and small electronics
- Material
- Aluminum, Copper
- Compatible Device
- Raspberry Pi, CPU, GPU, Laptop
- Mounting Type
- Thermal conductive adhesive tape
- Dimensions
- 1.57 × 1.57 × 0.43 inches
- Weight
- 7.83 ounces
View on Amazon: GeeekPi 102-Piece Aluminum and Copper Heatsink Kit Affiliate link
This kit gives you 102 heatsinks partitioned into 17 compartments inside an included storage box. The set contains 92 aluminum heatsinks and 10 copper heatsinks, each paired with thermal conductive adhesive tape for direct mounting. It suits you if you need mixed-metal cooling options for compact electronics like Raspberry Pi boards, laptop components, stepper motor drivers, VRMs, or GPUs without sourcing individual pieces separately.
Pros
- Includes 102 pieces divided across 17 categorized sections
- Combines 92 aluminum and 10 copper heatsinks
- Uses thermal conductive adhesive tape for mounting
- Comes packaged in a dedicated storage box
Cons
- Contains only 10 copper pieces compared to 92 aluminum units
- Relies entirely on adhesive tape without mechanical mounting hardware
Good fit if
- You need a mix of aluminum and copper heatsinks for small electronics
- You want thermal conductive adhesive tape mounting for quick installation
- You are cooling compact chips on Raspberry Pi boards, VRMs, or 3D printer drivers
Skip if
- You require an all-copper heatsink assortment
- You need screw or clip-based mechanical mounting instead of adhesive tape
Verdict: GeeekPi 102-Piece Aluminum and Copper Heatsink Kit provides an organized assortment of 17 sizes with thermal adhesive backing for small-scale electronics. It is a solid choice if you need primarily aluminum sinks alongside a small selection of copper units.
Bopaodao 120mm Flat Copper Heat Pipe
Best for: directional cooling in slim electronics
- Material
- 99% pure copper
- Cooling Method
- Passive
- Compatible Device
- Laptop, CPU, GPU, mobile phone
- Dimensions
- 2mm x 5.5mm x 120mm
View on Amazon: Bopaodao 120mm Flat Copper Heat Pipe Affiliate link
The Bopaodao flat heat pipe is a passive thermal component built from 99% pure copper. Measuring 2mm thick, 5.5mm wide, and 120mm long, it moves thermal energy away from processors rather than acting as a simple gap filler. This design suits you if you repair or modify compact laptop cooling assemblies, GPU backplates, or small electronics that need directional heat transfer.
Pros
- Made of 99% pure copper for thermal conduction
- Slim 2mm thickness and 5.5mm width fit low-clearance areas
- Passive cooling operation requires no power
Cons
- Single pipe per package rather than an assortment
- Dimensional variance allowed up to ±0.2mm thickness and ±0.5mm length
- Lacks included thermal adhesive or mounting hardware
Good fit if
- You need to route heat across a 120mm span in tight hardware
- You modify laptop, phone, or GPU backplate cooling assemblies
Skip if
- You need a multi-size pack of flat square copper shims
- You require pre-applied thermal adhesive
Verdict: Bopaodao 120mm Flat Copper Heat Pipe delivers directional passive heat transfer for compact enclosures where flat shims cannot move heat away from components.
Bopaodao 5mm x 90mm Copper Heat Pipe
Best for: Targeted heat transfer in tight spaces
- Material
- Copper, thermal fluid
- Cooling Method
- Passive
- Compatible Device
- Laptop, PC, GPU, CPU, VRAM, RAM
- Dimensions
- 5mm x 90mm
View on Amazon: Bopaodao 5mm x 90mm Copper Heat Pipe Affiliate link
The Bopaodao 5mm x 90mm Copper Heat Pipe is a single passive round cooling tube filled with thermal fluid. Measuring 5mm in diameter and 90mm in length, it conducts heat from sources like a GPU, CPU, or VRAM to a secondary heatsink. This fits your setup if you need directional heat transfer along a narrow path rather than a flat copper shim covering a single flat chip surface.
Pros
- Internal thermal fluid design acts as a heat exchange medium
- Compact 5mm diameter and 90mm length fits tight spaces
- Passive copper construction requires no moving parts
- Compatible with PC, laptop, GPU, CPU, and VRAM applications
Cons
- Package includes only a single heat pipe
- Round 5mm profile requires flattening or bending for flat-mount spots
- Thermal adhesive and mounting accessories are not included
Good fit if
- You need to route heat 90mm away from a GPU, CPU, or VRAM component.
- You prefer a tubular heat pipe containing thermal fluid over a solid flat copper pad.
Skip if
- You need a multi-piece assortment of flat 15mm copper shims.
- You require pre-applied thermal adhesive tape out of the box.
Verdict: Bopaodao 5mm x 90mm Copper Heat Pipe provides fluid-assisted passive thermal transfer along a compact 90mm span. It serves specialized heat redirection needs where standard flat copper shims cannot reach.
JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink
Best for: passive M.2 SSD cooling
- Material
- Pure Copper
- Compatible Device
- M.2 2280 SSD, Laptop, PS5
- Dimensions
- 70x20x2mm
- Features
- Thermal Pad
- Weight
- 1.06 ounces
View on Amazon: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink Affiliate link
This JOYJOM heatsink uses pure copper for high thermal conductivity. A graphite layer covers the copper surface to improve heat dissipation. It includes a thermal pad for SSD contact. The design fits M.2 2280 SSDs in laptops and PS5 consoles. You get rubber rings and bandages for secure installation. This kit helps keep your drive cool.
Pros
- Pure copper material for efficient heat transfer
- Graphite coating increases heat dissipation area
- Includes thermal pad and installation accessories
- Compact 70x20x2mm size for tight spaces
Cons
- Limited to M.2 2280 SSD form factor
- No fan included for active cooling
- Cooling effect varies by environment
Good fit if
- You need passive cooling for an M.2 SSD
- You are installing a heatsink in a PS5
- You want a pure copper thermal solution
Skip if
- You require active cooling with a fan
- You have a non-standard SSD size
- You need a heatsink for a CPU
Verdict: JOYJOM M.2 Copper Heatsink with Graphite is a passive cooling solution for M.2 2280 SSDs. It suits users who need reliable heat dissipation without moving parts. The pure copper build ensures steady performance.
Specifications side by side
| Spec | Easycargo 100-Piece 15mm Copper Shim Kit | Easycargo 20mm Copper Pad Shim Kit | Easycargo 15x15x0.5mm Copper Shims 20-Pack | GeeekPi 102-Piece Aluminum and Copper Heatsink Kit | Bopaodao 120mm Flat Copper Heat Pipe | Bopaodao 5mm x 90mm Copper Heat Pipe | JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink |
|---|---|---|---|---|---|---|---|
| Material | Copper C1100 | Pure Copper C1100 | Copper | Aluminum, Copper | 99% pure copper | Copper, thermal fluid | Pure Copper |
| Cooling Method | not stated | not stated | passive | not stated | Passive | Passive | not stated |
| Compatible Device | PC, Laptop GPU, CPU, M.2 NVMe SSD | CPU, GPU, VGA, RAM, VRM, PS5 SSD | Laptop GPU CPU IC Chips VGA RAM | Raspberry Pi, CPU, GPU, Laptop | Laptop, CPU, GPU, mobile phone | Laptop, PC, GPU, CPU, VRAM, RAM | M.2 2280 SSD, Laptop, PS5 |
| Dimensions | not stated | 20mm x 20mm | 15x15x0.5mm | not stated | 2mm x 5.5mm x 120mm | 5mm x 90mm | 70x20x2mm |
| Mounting Type | not stated | not stated | Pre applied adhesive tape backing | Thermal conductive adhesive tape | not stated | not stated | not stated |
| Features | not stated | not stated | Thermal Tape | Thermal Tape | not stated | not stated | Thermal Pad |
| Length | 0.6 inches | not stated | 0.59 inches | not stated | not stated | not stated | not stated |
| Width | 0.6 inches | not stated | 0.59 inches | not stated | not stated | not stated | not stated |
| Weight | not stated | 4.66 ounces | not stated | 7.83 ounces | not stated | not stated | 1.06 ounces |
| Color | Copper | not stated | Copper Tone | not stated | W: 5.5mm T: 2mm | L: 90mm | Black |
| Model | ES-C100-1515 | 2020XXC40 | NA | not stated | not stated | not stated | 70x20x2mm |
| Size | not stated | not stated | 15x15x0.5mm | not stated | L: 120mm | D: 5mm | not stated |
If you require different pad dimensions, you can evaluate koolsiln 12 alternatives for other thickness options.
Frequently asked questions
Which alternative offers the widest copper shim surface area?
The Easycargo 20mm Copper Pad Shim Kit provides the largest footprint in this list. Its dimensions reach 1.57 inches in width and 6.02 inches in length. This wider surface area suits components that exceed the standard 0.6-inch width of the original 15mm shims. It delivers high thermal conductivity across six thickness options for broader gap filling.
Are there options with adhesive backing for easier installation?
Yes, several alternatives include adhesive backing to simplify installation. The Easycargo 15x15x0.5mm Copper Shims feature thermal tape for straightforward passive chip cooling. The GeeekPi 102-Piece Aluminum and Copper Heatsink Kit also uses thermal adhesive backing. These features help secure components without requiring additional mounting hardware or complex application methods.
What is the best choice for cooling M.2 SSDs?
The JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink is designed specifically for M.2 2280 SSDs. It measures 70x20x2mm and features a graphite coating for enhanced heat dissipation. This passive solution suits users who need reliable cooling for laptops, PS5 consoles, or other systems where space is limited and moving parts are not desired.
Do any alternatives use heat pipes for directional cooling?
The Bopaodao brand offers flat copper heat pipes for directional heat transfer. The 120mm model measures 120mm in length with a width of 5.5mm and thickness of 2mm. The 5mm x 90mm variant provides a compact 90mm span. These pipes serve specialized needs where standard flat shims cannot effectively move heat away from components in tight spaces.
Which kit includes both aluminum and copper materials?
The GeeekPi 102-Piece Aluminum and Copper Heatsink Kit is the only option in this list that combines both materials. It contains an assortment of 17 sizes, primarily aluminum with a small selection of copper units. This mix is ideal for cooling Raspberry Pi boards and small electronics where different thermal properties are beneficial.
How do the dimensions of the 20mm shims compare to the 15mm originals?
The 20mm shims are significantly larger than the original 15mm versions. The original shims measure 0.6 inches by 0.6 inches. The 20mm alternative expands to 1.57 inches in width and 5.12 inches in height. This increase in surface area allows for better heat spreading across wider components like GPUs and VRMs.