Looking Beyond the Dynatron 2U LGA 4926 Server? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Dynatron 2U LGA 4926 Server Cooler handles 250W TDP with 11000 RPM airflow. You might look for dynatron w1 socket lga 4926 alternatives if your build uses a different socket or needs a smaller footprint. This cooler fits Ampere Altra processors in 2U chassis, but its specific dimensions and active cooling requirements may not suit every rack server.
We selected 6 options because their specifications overlap with the original design. Some alternatives support legacy sockets like LGA 1155 or modern LGA 1700. Others offer passive cooling for systems with strong chassis airflow. You can choose based on TDP ratings, socket compatibility, or material construction. Each option meets the 2U height constraint while addressing different thermal needs. Review the specs to find the best fit for your specific server motherboard and processor.
How each alternative compares
Supermicro 2U Server CPU Cooler
The Supermicro SNK-P0046A4 targets legacy LGA1155 and LGA1156 sockets, unlike the Dynatron W1 which supports LGA 4926. It uses a push-pin mount system, offering a different installation method than the standard server rack mounts. Its cubic dimensions measure 3.6 inches on each side, making it significantly smaller and lighter at 1 pound compared to the Dynatron’s larger aluminum and copper block. This compact 2U passive cooler is best for older uniprocessor server builds where space is tight and socket compatibility is the primary constraint.
KLAWKKNI 2U Passive LGA 2011 Cooler
The KLAWKKNI cooler is designed for LGA 2011 sockets, whereas the Dynatron W1 supports LGA 4926. It is a fanless passive unit, relying entirely on chassis airflow rather than the Dynatron’s 11000 RPM fan for heat dissipation. This makes it suitable for environments with strong existing airflow but where noise reduction is critical. The unit features A-RGB lighting and a black finish, adding aesthetic options not present in the standard industrial Dynatron design. It serves narrow-socket passive configurations in rack installations where active fans are undesirable.
Dynatron 2U Active Server CPU Cooler
The Dynatron K555 supports Intel LGA 115X and LGA 1200 sockets, differing from the Ampere Altra LGA 4926 support of the W1. It is an active cooler using copper heat pipes and aluminum fins, similar in material but tailored for Intel processors. The dimensions are 6x6x6 inches, slightly larger than the W1’s 5x4x6 inch profile. This model is intended for budget-conscious builds in 2U racks running Intel CPUs. It provides direct contact cooling for older Intel platforms where the newer socket-specific Dynatron W1 would not physically fit or electrically connect.
Dynatron 2U Active Server Cooler
The Dynatron Q5 supports Intel LGA 1700 sockets, contrasting with the W1’s LGA 4926 compatibility. It is an active cooler with dual ball bearings, providing reliable airflow for 125-watt Intel processors in 2U chassis. The unit measures 5x5x5 inches and weighs 1.1 pounds. It offers direct-contact heat dissipation suitable for modern Intel server builds. If your system uses an LGA 1700 processor rather than an Ampere Altra chip, this active cooler provides the necessary socket interface and thermal management within the same 2U form factor standard.
Coolerguys 2U LGA 1700 Vapor Chamber Cooler
The Coolerguys 840556075127 uses a vapor chamber design for LGA 1700 sockets, differing from the W1’s copper base and heat pipes. It supports up to 200W TDP with active airflow reaching 8000 RPM. The dimensions are 3.54x2.58x3.54 inches, making it much smaller than the Dynatron W1. This compact cooler is strictly for 78x78mm LGA 1700 motherboards in 2U chassis. It offers high-speed thermal management in a reduced footprint, ideal for servers requiring efficient cooling for Intel processors without the larger bulk of traditional fin-stack designs.
Dynatron A47 2U Active CPU Cooler
The Dynatron A47 supports AMD AM4 and AM5 sockets, unlike the Intel/Ampere-focused W1. It is designed for 95W AMD CPUs, which is lower than the W1’s 250W TDP rating. The dimensions are 3.07x2.64x4.21 inches, making it the smallest option here. It fits 2U cases with AMD processors. This cooler is not suitable for Intel builds or higher power chips. If your server uses an AMD Ryzen EPYC or Threadripper PRO in a 2U rack, this active cooler provides the correct socket interface and thermal capacity for those specific 95W processors.
Quick picks
Our 7 picks
Dynatron 2U LGA 4926 Server Cooler
Best for: Ampere Altra 2U server builds
- Socket Compatibility
- LGA 4926
- TDP Rating
- 250W
- Fan Speed
- 11000 RPM
- Server Height
- 2U
- Cooling Method
- Passive
- Dimensions
- 5 × 4 × 6 inches
View on Amazon: Dynatron 2U LGA 4926 Server Cooler Affiliate link
This Dynatron cooler fits 2U server chassis running Ampere Altra processors on socket LGA 4926. It handles thermal loads up to 250W TDP using copper heatpipes, an aluminum fin stack, and a copper base. The unit includes pre-applied Shin-Etsu X23-8079-2 thermal paste and runs up to 11000 RPM, delivering 58.31 CFM of airflow. You get a direct-fit cooling setup for high-wattage Ampere Altra rackmount installations.
Pros
- Supports thermal loads up to 250W TDP
- Pre-printed Shin-Etsu X23-8079-2 thermal paste included
- Copper base with copper heatpipes and aluminum fins
- Delivers up to 58.31 CFM airflow at 11000 RPM
Cons
- High noise output reaching up to 59.8 dBA
- Socket support restricted strictly to LGA 4926
Good fit if
- You run an Ampere Altra processor on an LGA 4926 motherboard.
- You need a 2U rackmount cooler supporting up to 250W TDP.
Skip if
- You require low-noise operation under 50 dBA.
- You use Intel or AMD server sockets instead of LGA 4926.
Verdict: Dynatron 2U LGA 4926 Server Cooler delivers 250W TDP heat dissipation and high-velocity airflow for Ampere Altra processors in 2U chassis.
Supermicro 2U Server CPU Cooler
Best for: Legacy 2U LGA1155 and LGA1156 server builds
- Socket Compatibility
- LGA1156, LGA1155
- Fan Speed
- 2800 RPM
- Server Height
- 2U
- Cooling Method
- Passive
- Dimensions
- 3.6 × 3.6 × 3.6 inches
- Weight
- 1 pounds
View on Amazon: Supermicro 2U Server CPU Cooler Affiliate link
The Supermicro 2U Push-Pin Server Cooler is built for 2U uniprocessor servers and workstations. It supports Intel Socket LGA1156 and LGA1155 motherboards, pairing with Xeon 3400 series and Core i3, i5, or i7 processors. Measuring 3.6 by 3.6 by 3.6 inches, this one-pound unit operates at 2800 RPM with a 33.5 dBA noise profile. You get push-in pin mounting for straightforward installation in matching chassis layouts.
Pros
- Supports Socket LGA1156 and LGA1155 motherboards
- Push-in pin mounting mechanism
- 2800 RPM operating speed
- Compact 3.6 by 3.6 by 3.6 inch dimensions
Cons
- No compatibility with LGA 4926 or modern sockets
- Noise level rated at 33.5 dBA
Good fit if
- You need a 2U cooler for an LGA1155 or LGA1156 motherboard.
- You run an Intel Xeon 3400 or Core i3, i5, or i7 series CPU.
- You prefer push-in pin mounting over screw brackets.
Skip if
- You need a cooler for an LGA 4926 socket.
- You require an ultra-quiet acoustic profile below 33.5 dBA.
Verdict: Supermicro 2U Push-Pin Server Cooler provides focused thermal support for legacy LGA1155 and LGA1156 uniprocessor servers. Its push-in pin mount and 2U form factor suit compact chassis configurations.
KLAWKKNI 2U Passive LGA 2011 Cooler
Best for: 2U LGA 2011 passive server configurations
- Socket Compatibility
- LGA 2011
- Lighting
- RGB
- System Type
- Server
- Color
- Black
- Server Height
- 2U
- Cooling Method
- Passive
View on Amazon: KLAWKKNI 2U Passive LGA 2011 Cooler Affiliate link
This KLAWKKNI unit provides passive cooling designed for 2U server chassis using the LGA 2011 socket. It features a black finish, integrated RGB lighting, and acts as a server radiator without an attached fan. If you maintain 2U rack equipment with LGA 2011 narrow motherboards, this heatsink fits into your chassis ducting system. It offers a dedicated passive thermal solution when your server relies on external chassis fans for internal airflow.
Pros
- Fits standard 2U server chassis height profiles
- Fanless passive design operates without mechanical fan wear
- Includes integrated RGB lighting
- Tailored specifically for LGA 2011 narrow socket layouts
Cons
- Compatibility limited solely to LGA 2011 sockets
- Requires external server chassis airflow due to lack of a built-in fan
Good fit if
- You run a 2U server using an LGA 2011 narrow socket motherboard.
- You have existing chassis fans and fan ducts to push air through a passive heatsink.
- You prefer a black cooler that incorporates RGB lighting.
Skip if
- You need mounting support for modern LGA 4926 or alternative socket designs.
- You need an active cooler with a pre-installed fan for standalone cooling.
Verdict: KLAWKKNI 2U Passive LGA 2011 Server Cooler delivers a fanless 2U thermal design specifically tailored to LGA 2011 server motherboards. It suits rack installations with strong existing chassis airflow that need dedicated narrow-socket passive cooling.
Dynatron 2U Active Server CPU Cooler
Best for: Intel LGA 115X and 1200 2U servers
- Socket Compatibility
- LGA 115X, LGA 1200
- Server Height
- 2U
- Cooling Method
- Active
- Material
- Copper, Aluminum
- Dimensions
- 6 × 6 × 6 inches
View on Amazon: Dynatron 2U Active Server CPU Cooler Affiliate link
This is an active 2U server cooler built with a copper base, embedded heat pipes, and aluminum fins. It measures 94.0 by 87.5 by 67.7 millimeters and features a dual ball bearing fan. Designed specifically for Intel LGA 115X and LGA 1200 sockets, it fits server racks of 2U height and above. It suits your setup if you run compact Intel rack hardware.
Pros
- Dual ball bearing fan design
- Copper base with embedded heat pipes and aluminum fins
- Fits 2U chassis and larger rack systems
- Compact 94.0 x 87.5 x 67.7 mm dimensions
Cons
- Compatibility limited to LGA 115X and LGA 1200 sockets
- No support for larger server sockets like LGA 4926
Good fit if
- You need an active cooling unit for a 2U or taller chassis.
- You run an Intel system on an LGA 115X or LGA 1200 socket.
Skip if
- You use an LGA 4926, LGA 1700, or AMD motherboard.
- You require a passive heatsink for a 1U chassis.
Verdict: Dynatron 2U Active Copper Heat Pipe Cooler delivers targeted cooling for 2U racks running Intel LGA 115X or LGA 1200 processors.
Dynatron 2U Active Server Cooler
Best for: 2U Intel LGA 1700 server builds
- Socket Compatibility
- LGA1700
- TDP Rating
- 125 Watts
- System Type
- Server
- Server Height
- 2U
- Cooling Method
- Active
- Dimensions
- 5 × 5 × 5 inches
View on Amazon: Dynatron 2U Active Server Cooler Affiliate link
This Dynatron active server cooler fits 2U server chassis and targets Intel LGA 1700 motherboards. It combines a copper base with direct-contact heat pipes, aluminum fins, and a 4-pin PWM dual ball bearing fan. With a 125-watt thermal design power rating, it handles standard desktop-class server processors in rack enclosures. If you run a compact 2U Intel server build requiring dedicated active air cooling, this unit covers your socket and thermal requirements.
Pros
- Supports Intel socket LGA 1700
- Copper base with direct-contact heat pipes and aluminum fins
- Equipped with a 4-pin PWM dual ball bearing fan
- Rated for thermal loads up to 125 watts
Cons
- Limited to Intel LGA 1700 socket mounting
- Maximum cooling capacity capped at 125 watts TDP
Good fit if
- You build inside a 2U or taller server chassis
- You use an Intel LGA 1700 motherboard
- Your processor operates at 125 watts TDP or lower
Skip if
- You need compatibility with AMD sockets or Intel LGA 4926
- You deploy high-draw processors exceeding 125 watts TDP
Verdict: Dynatron 2U Active LGA 1700 Server Cooler provides direct-contact active heat dissipation for 125-watt Intel LGA 1700 rack systems. It serves 2U server deployments needing reliable dual ball bearing active airflow.
Coolerguys 2U LGA 1700 Vapor Chamber Cooler
Best for: 2U servers requiring LGA 1700 vapor chamber cooling
- Socket Compatibility
- LGA1700
- TDP Rating
- 200W
- Fan Speed
- 8000 RPM
- Server Height
- 2U
- Cooling Method
- Active
- Features
- Vapor Chamber
View on Amazon: Coolerguys 2U LGA 1700 Vapor Chamber Cooler Affiliate link
The Coolerguys 2U Active Vapor Chamber Cooler is a compact cooling unit designed for LGA 1700 processors in 2U chassis. It integrates a vapor chamber base rated for up to 200W TDP and pairs it with a dual ball bearing PWM fan spinning between 2600 and 8000 RPM. Measuring 2.58 inches tall with a 78x78mm mounting pitch, it suits you if you need dense, high-speed active cooling for dedicated LGA 1700 rackmount hardware.
Pros
- Integrated vapor chamber base rated for up to 200W TDP
- PWM fan operating across a 2600 to 8000 RPM range
- Dual ball bearing construction for active server cooling
- Compact 2.58-inch height designed for 2U enclosures
Cons
- Restricted entirely to the LGA 1700 socket platform
- Requires a fixed 78x78mm mounting pitch
Good fit if
- You run an Intel LGA 1700 processor inside a 2U rackmount chassis.
- You need thermal dissipation rated for up to 200W TDP.
- Your motherboard supports a 78x78mm cooler mounting pitch.
Skip if
- You operate an LGA 4926, LGA 2011, or AMD socket.
- You require a passive heatsink without an attached fan.
- You assemble a 1U chassis with clearance under 2.58 inches.
Verdict: Coolerguys 2U Active Vapor Chamber LGA 1700 Cooler delivers 200W TDP capacity and up to 8000 RPM active airflow in 2U chassis. Its vapor chamber design provides high-speed thermal management strictly for 78x78mm LGA 1700 motherboards.
Dynatron A47 2U Active CPU Cooler
Best for: 95W AMD AM4/AM5 in 2U cases
- Socket Compatibility
- AM4, AM5
- Cooler Height
- 67mm
- Heat Pipes
- 4
- Fan Size
- 60mm
- TDP Rating
- 95W
- Server Height
- 2U
View on Amazon: Dynatron A47 2U Active CPU Cooler Affiliate link
The Dynatron A47 is an active air cooler designed for AMD AM4 and AM5 sockets. It supports up to 95 watts of heat dissipation using four heat pipes and an aluminum stacked fin array. The unit includes a 60x60x25mm 4-pin PWM fan. Its overall dimensions are 107x78x67mm, making it suitable for 2U server chassis. This cooler offers a compact solution for specific AMD platforms.
Pros
- Compatible with AMD AM4 and AM5 sockets
- Supports 95W TDP heat dissipation
- Features four heat pipes and aluminum fins
- Includes 4-pin PWM fan for speed control
- Compact 60x60x25mm fan size fits tight spaces
Cons
- Limited to 95W thermal support
- Small 60mm fan may produce more noise
- No mention of socket mounting hardware included
Good fit if
- You use an AMD AM4 or AM5 processor
- You need a cooler for a 2U server chassis
- You require support for up to 95W TDP
Skip if
- You use an Intel socket like LGA 1700
- Your CPU exceeds 95W thermal design power
- You need a larger 80mm or 92mm fan
Verdict: Dynatron A47 AM4/AM5 2U Active Cooler fits users with 95W AMD CPUs in 2U cases. It does not suit Intel builds or higher power chips.
Specifications side by side
| Spec | Dynatron 2U LGA 4926 Server Cooler | Supermicro 2U Server CPU Cooler | KLAWKKNI 2U Passive LGA 2011 Cooler | Dynatron 2U Active Server CPU Cooler | Dynatron 2U Active Server Cooler | Coolerguys 2U LGA 1700 Vapor Chamber Cooler | Dynatron A47 2U Active CPU Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA 4926 | LGA1156, LGA1155 | LGA 2011 | LGA 115X, LGA 1200 | LGA1700 | LGA1700 | AM4, AM5 |
| Cooler Height | not stated | not stated | not stated | not stated | not stated | not stated | 67mm |
| Heat Pipes | not stated | not stated | not stated | not stated | not stated | not stated | 4 |
| Fan Size | not stated | not stated | not stated | not stated | not stated | not stated | 60mm |
| TDP Rating | 250W | not stated | not stated | not stated | 125 Watts | 200W | 95W |
| Fan Speed | 11000 RPM | 2800 RPM | not stated | not stated | not stated | 8000 RPM | not stated |
| Lighting | not stated | not stated | RGB | not stated | not stated | not stated | not stated |
| System Type | not stated | not stated | Server | not stated | Server | not stated | not stated |
| Color | not stated | not stated | Black | not stated | Various | Black | not stated |
| Server Height | 2U | 2U | 2U | 2U | 2U | 2U | 2U |
| Cooling Method | Passive | Passive | Passive | Active | Active | Active | Active |
| Material | not stated | not stated | not stated | Copper, Aluminum | not stated | not stated | not stated |
| Features | not stated | not stated | not stated | not stated | not stated | Vapor Chamber | not stated |
| Dimensions | 5 × 4 × 6 inches | 3.6 × 3.6 × 3.6 inches | not stated | 6 × 6 × 6 inches | 5 × 5 × 5 inches | 3.54 × 3.54 × 2.58 inches | 4.21 × 3.07 × 2.64 inches |
| Weight | not stated | 1 pounds | not stated | not stated | 1.1 pounds | not stated | 14.1 ounces |
| Model | W1 | SNK-P0046A4 | KLAWKKNI | K555 | Q5 | 840556075127 | 840556075509 |
| Size | not stated | not stated | A-RGB | not stated | not stated | not stated | not stated |
If your build needs power hardware alongside rack cooling, you can review evga 500 w1 alternatives for standard wattage specs.
Frequently asked questions
Can I use the Dynatron W1 on an AMD AM4 processor?
No, the Dynatron W1 is designed for LGA 4926 sockets. If you need cooling for an AMD AM4 or AM5 processor in a 2U case, the Dynatron A47 is a suitable alternative. It supports 95W AMD CPUs and fits within 2U chassis constraints. It is not intended for Intel builds or higher power chips.
Which alternative is best for LGA 1700 sockets?
The Coolerguys 2U LGA 1700 Vapor Chamber Cooler is a strong option for this socket. It provides 200W TDP capacity and up to 8000 RPM active airflow. The vapor chamber design offers high-speed thermal management for 78x78mm motherboards. The Dynatron Q5 is another choice, serving 125-watt Intel LGA 1700 rack systems with dual ball bearing active airflow.
Is there a passive cooler option for LGA 2011?
Yes, the KLAWKKNI 2U Passive LGA 2011 Cooler is tailored for these motherboards. It is a fanless unit that suits rack installations with strong existing chassis airflow. This design provides dedicated narrow-socket passive cooling. It is specifically built for 2U passive server configurations where system fans handle the air movement.
What is the best budget-friendly 2U active cooler?
The Dynatron 2U Active Copper Heat Pipe Cooler is the best budget option. It delivers targeted cooling for 2U racks running Intel LGA 115X or LGA 1200 processors. It uses copper and aluminum materials for heat dissipation. This model is distinct from the W1, as it targets older Intel socket types rather than LGA 4926.
Can I use these coolers in a standard desktop case?
These products are designed for 2U server chassis, not standard desktop cases. The Dynatron W1, Supermicro SNK-P0046A4, and others all specify a 2U server height. They require rack installation and specific server airflow patterns. You should verify your chassis supports 2U form factors before purchasing any of these server-grade coolers.
How does the Supermicro cooler differ from the Dynatron W1?
The Supermicro SNK-P0046A4 targets legacy LGA1155 and LGA1156 sockets, unlike the Dynatron W1 which supports LGA 4926. It uses a push-pin mount system, offering a different installation method. Its cubic dimensions measure 3.6 inches on each side. The Dynatron W1 is larger and designed for higher TDP Ampere Altra processors.