Deal4GO ThinkCentre Tiny 65W CPU Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This deal4go 65w CPU cooling fan review covers a replacement blower for Lenovo ThinkCentre Tiny systems. It is designed for the 65W copper heatsink variant, identified by FRU 01MN631. The unit operates on DC 12V at 0.80A, drawing 3.0W of power. It connects via a 4-pin wire-to-board interface. The fan measures 5.8 inches in length and 3.6 inches in width. It weighs 3.17 ounces. This component serves as a direct replacement for models like the M920Q and M920x. It also includes thermal grease for installation.
What stands out
- Compatible with 65W copper heatsink FRU 01MN631 series
- Operates at DC 12V / 0.80A (3.0W)
- Includes 4-pin 4-wire wire-to-board connector
- Dimensions: 5.8 x 3.6 x 0.6 inches
- Comes with thermal grease included
Who it fits
Good fit for
You should buy this if you own a Lenovo ThinkCentre M920Q, M920x, or ThinkStation P330 Tiny. It is specifically for users with the 65W copper heatsink configuration. The 4-pin connector matches existing setups. It is a practical fix for failed original fans. You need to verify your current fan is the 65W version. This ensures proper fit and airflow for your desktop workstation.
Who should skip it
Skip this if your system uses the 35W heatsink. The data notes a separate 35W version exists. Using this fan on the wrong heatsink will cause compatibility issues. It is also not suitable for non-Lenovo desktops. The 4-pin connector is specific to these Tiny series models. Do not purchase if you need a different voltage or connector type. Check your old fan part number before buying.
Verdict: This is a spec-accurate replacement for specific Lenovo Tiny desktops with 65W copper heatsinks. Verify your model number to ensure it fits your existing setup.
Key specs for this blower fan
DC 12V / 0.80A
This rating defines the electrical requirements for the fan motor. It indicates the voltage and current draw needed for operation. You must ensure your motherboard header supplies 12V. This standard voltage is common in desktop systems. Matching these specs prevents damage to the fan or the system. It ensures the blower spins at the intended speed for adequate airflow.
3.0W
This is the total power consumption of the fan. It shows how much energy the unit uses while running. A 3.0W draw is relatively low for a cooling component. This efficiency means it adds minimal load to your system power supply. It helps keep overall system temperatures stable by using less electricity to move air across the heatsink fins.
4-Pin 4-Wire
This connector type supports PWM (Pulse Width Modulation) control. It allows your motherboard to adjust fan speed dynamically based on CPU temperature. This feature provides precise thermal management. You get quieter operation at low loads and maximum cooling when needed. Ensure your system has a compatible 4-pin header to utilize this speed control capability effectively.
01MN632
This FRU part number identifies the specific replacement unit. It ensures you buy the exact version for your 65W copper heatsink. Using the wrong FRU can lead to compatibility issues or poor fit. Verify this number against your existing hardware before purchasing. It guarantees the blower matches the physical and electrical requirements of your Lenovo ThinkCentre Tiny model.
Design and build details
According to the listing, this unit is a black blower fan designed for specific Lenovo systems. The housing appears to be plastic, typical for small form factor replacements. You need to check the physical dimensions carefully. The fan measures 5.8 inches in length, 3.6 inches in width, and 0.6 inches in height. This compact footprint is critical for fitting inside the tight chassis of ThinkCentre Tiny models like the M920Q or M920x. The low profile ensures it clears surrounding components without interference.
The weight is listed at 3.17 ounces. This light mass suggests a standard plastic shroud and motor assembly. It is not a heavy metal construction. You should handle it gently during installation to avoid bending the blades or damaging the motor mounts. The design includes a 4-pin 4-wire wire-to-board connector. This allows direct attachment to your existing heatsink or motherboard header. You must verify your system supports this pin configuration.
The listing notes it includes one unit and thermal grease. The black finish is functional rather than aesthetic. It matches the internal components of most desktop workstations. There are no visible RGB lights or decorative elements. The build focuses on utility and compatibility. Ensure your current heatsink is the 65W copper version before relying on these physical specs for fit.
Setup and everyday use guide
Installation requires matching this fan to your specific system variant. The listing notes two versions exist for the heatsink. You must confirm your existing copper heatsink uses FRU 01MN631. This unit is FRU 01MN632. Mismatching the version will prevent proper fit. The physical dimensions are strict. The fan measures 5.8 inches in length, 3.6 inches in width, and 0.6 inches in height. You need to verify these measurements against your case space. The weight is 3.17 ounces, which is light for mounting. Electrical setup is straightforward. The fan operates on DC 12V at 0.80A. It draws 3.0W of power. You connect it using the included 4-pin 4-wire wire-to-board connector. This attaches directly to your existing heatsink assembly. You do not need additional cables. The package includes one thermal grease pad. You should apply this to the CPU contact surface before installing the heatsink. Daily use involves passive cooling support. The blower design pushes air through the heatsink fins. This maintains stable temperatures during desktop tasks. The system type is listed as a desktop. This implies standard office or workstation workloads. The fan runs quietly at its rated speed. You benefit from consistent airflow without manual intervention. The black color blends with standard internal components. No software or drivers are required for operation. It is a hardware-only replacement. You simply swap the old unit. The process is mechanical and direct. Ensure the 4-pin connector aligns correctly with the motherboard header. This ensures proper power delivery and speed control. The setup is complete once the fan is secured and connected.
Check compatibility before buying
You need to verify your existing heatsink model before installing this replacement. The listing specifies this fan is for the 65W copper heatsink variant, identified by FRU 01MN631. If your system uses the 35W version, this unit will not fit. You must check your old cooling fan for compatibility. The package includes thermal grease, which simplifies reapplication. You should clean the heatsink fins thoroughly before applying the new paste. This ensures optimal heat transfer. As a CPU air cooler replacement, this blower fan is specific to Lenovo ThinkCentre Tiny systems. It does not fit standard desktop cases. You should compare its dimensions against other options in our guide. This product is strictly for small form factor repairs. It is not a general-purpose cooler. Ensure your motherboard header supports the 4-pin connection. Regular maintenance involves dusting the fan blades. This keeps airflow consistent over time.
Check before you buy
- Confirm your heatsink is the 65W copper version with FRU 01MN631.
- Verify your motherboard has a 4-pin 12V header for the fan.
- Measure your case space to ensure the 5.8-inch length fits.
- Check that the thermal grease included is sufficient for your needs.
The product at a glance
Deal4GO ThinkCentre Tiny 65W CPU Blower Fan
Best for: Lenovo ThinkCentre Tiny 5 65W replacements
- System Type
- Desktop
- Features
- Fan
- Dimensions
- 5.8 × 3.6 × 0.6 inches
- Weight
- 3.17 ounces
View on Amazon: Deal4GO ThinkCentre Tiny 65W CPU Blower Fan Affiliate link
This is a replacement CPU cooling fan for Lenovo ThinkCentre Tiny and ThinkStation P3 series systems. It is designed for the 65W copper heatsink variant, identified by FRU 01MN632. The unit measures 5.8 by 3.6 inches and weighs 3.17 ounces. It runs on DC 12V at 0.80A via a 4-pin connector. You get one fan and thermal grease in the pack. It suits users needing a direct replacement for their specific desktop model.
Pros
- Compatible with Lenovo ThinkCentre M920Q, M920x, and ThinkStation P330 Tiny.
- Includes 1x thermal grease for installation.
- Uses standard 4-pin 4-wire power connection.
- Compact dimensions of 5.8 by 3.6 inches.
Cons
- Only fits the 65W copper heatsink version, not the 35W variant.
- Single fan unit with no adjustable speed settings listed.
- Does not include mounting hardware or screws.
Good fit if
- You need a direct replacement for a Lenovo ThinkCentre Tiny 5 system.
- Your current cooler is the 65W copper heatsink type.
- You want a simple plug-in fan with included thermal grease.
Skip if
- You have a 35W heatsink configuration.
- You need a cooler for a different desktop brand.
- You require a fan with variable speed control.
Verdict: Deal4GO 65W CPU Fan for Lenovo Tiny is a straightforward replacement part for specific Lenovo desktop models. It fits users who need a direct swap for their 65W copper heatsink setup.
Specifications side by side
| Spec | Deal4GO ThinkCentre Tiny 65W CPU Blower Fan |
|---|---|
| System Type | Desktop |
| Features | Fan |
| Dimensions | 5.8 × 3.6 × 0.6 inches |
| Weight | 3.17 ounces |
| Color | Black |
| Model | ThinkCentre Tiny 5 |
Frequently asked questions
Is this fan compatible with all ThinkCentre Tiny models?
No, it is not universal. This unit is designed specifically for Lenovo ThinkCentre Tiny 5 systems with a 65W copper heatsink. You must verify your existing heatsink uses FRU 01MN631. The fan itself corresponds to FRU 01MN632. Mismatching these parts will prevent proper installation and cooling.
What are the physical dimensions of the Deal4GO fan?
The fan measures 5.8 inches in length, 3.6 inches in width, and 0.6 inches in height. It weighs 3.17 ounces. These compact dimensions are typical for small form factor desktop replacements. You should measure your existing slot to ensure the new unit fits without obstruction.
Does this blower fan require a special power supply?
It operates on a standard DC 12V input at 0.80A. This draws 3.0W of power, which is common for desktop motherboard headers. You do not need an external power adapter. Just ensure your system provides the standard 12V rail to the fan connector.
What color is the Deal4GO ThinkCentre fan housing?
The housing is black. This color matches most standard internal computer components and heatsink shrouds. The material appears to be plastic, which is typical for these replacement blower fans. It is designed to blend in with the existing interior of your Lenovo Tiny system.
Can I use this fan for a 35W ThinkCentre setup?
No, this unit is for the 65W variant only. The listing specifies it fits the 65W copper heatsink identified by FRU 01MN631. If your system uses the 35W version, this fan will not fit or function correctly. Check your current heatsink model number before purchasing.
Is this a direct replacement for the original Lenovo part?
Yes, it is a straightforward replacement part for specific Lenovo desktop models. It is intended for users who need a direct swap for their 65W copper heatsink setup. The design follows the original specifications for the ThinkCentre Tiny 5. You should verify the FRU numbers match your system.