Deal4GO OptiPlex Micro 65W CPU Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This deal4go 12v CPU cooling fan review covers a replacement blower for Dell OptiPlex Micro systems. It is designed for 65W aluminum heatsinks, not 35W models. The fan runs on 12V DC at 1.10A, delivering 13.95 CFM of airflow. It measures 6.7 inches in length and 4 inches in width. This compact unit attaches directly to your existing heatsink via a 4-pin connector. It comes with one fan and thermal grease. Read on to see if these specifications match your desktop needs.
What stands out
- Specific compatibility with Dell OptiPlex 7050, 7060, 7070, and 7040 Micro form factors.
- 12V DC power draw of 1.10A providing 13.95 CFM airflow.
- Includes one unit and thermal grease for immediate installation.
- Fits 65W aluminum heatsink series, excluding 35W variants.
Who it fits
Good fit for
You should buy this if you own a Dell OptiPlex 7050, 7060, 7070, or 7040 Micro desktop. It is ideal for users whose original blower fan failed and need a direct replacement for the 65W aluminum heatsink. The 4-pin connection ensures it attaches securely to your existing setup. If you need a quiet, spec-accurate swap for these specific micro towers, this fan fits your requirements.
Who should skip it
Skip this product if you have an OptiPlex 7080, SFF, or MT Tower desktop. It is also incompatible with 35W heatsink series systems. Do not buy this if you need a heatsink, as the package only includes the fan and thermal grease. Users requiring 5V fan versions for different motherboard headers should look elsewhere. Verify your model number carefully before ordering to avoid fitment issues.
Verdict: This fan is a precise replacement for specific Dell OptiPlex Micro models using 65W heatsinks. It delivers the specified airflow and fits the required form factor.
Key specs for this blower fan
Airflow: 13.95 CFM
This value indicates the volume of air the fan moves per minute. For a small blower fan, 13.95 CFM provides focused airflow directly onto the heatsink fins. This is sufficient for 65W processors in compact desktops. When comparing to tower air coolers, you will see much higher numbers, but those rely on larger fans and open cases. Here, the air is directed precisely where it is needed.
Voltage: DC 12V
The fan requires a 12-volt power supply to operate. This is the standard voltage for most desktop computer fans. It ensures compatibility with the power headers found in Dell OptiPlex Micro systems. You do not need to worry about voltage converters or adapters. Just ensure your motherboard or power supply provides the correct 12V rail, which is typical for this form factor.
Dimensions: 6.7 x 4 x 1.3 inches
These physical measurements define the footprint of the fan unit. The 6.7-inch length and 4-inch width must fit within the chassis of your Dell OptiPlex Micro. The 1.3-inch height is critical for clearance inside the tight metal enclosure. Before purchasing, measure your existing space. If the dimensions do not match your current slot, the fan will not install, regardless of its cooling performance.
Connection: 4-pin wire-to-board
This describes how the fan connects to the computer. A 4-pin connector allows for PWM control, meaning the motherboard can adjust fan speed based on temperature. The wire-to-board style attaches directly to the heatsink assembly. Check your existing heatsink to ensure the connector type matches. This ensures you can plug it in without needing extra cables or adapters.
Design and build details
According to the listing, this fan features a black finish on its housing. The unit is constructed as a blower style fan, which directs air in a single direction. This layout is essential for compact desktop cases where airflow paths are restricted. The fan connects via a 4-pin, 4-wire wire-to-board connector. This power connection attaches directly to your existing heatsink assembly, ensuring a secure electrical interface without requiring additional adapters.
The physical dimensions are specific to the Dell OptiPlex Micro form factor. The fan measures 6.7 inches in length, 4 inches in width, and 1.3 inches in height. These precise measurements ensure it fits within the tight chassis of 7050, 7060, and 7070 Micro systems. The listing notes it does not fit the 7080 or SFF MT Tower series. You must verify your chassis size before installation to avoid compatibility issues.
The unit weighs 2.47 ounces. This light weight reduces stress on the motherboard mounting points. The design is intended solely as a replacement blower for 65W aluminum heatsinks. It is not compatible with 35W heatsink series. The package includes one fan and thermal grease, but excludes the heatsink itself. You need to ensure your existing cooler matches the 65W specification for this fan to function correctly. The build focuses on direct replacement rather than enhanced cooling performance.
Setup and daily operation details
Setup involves matching this fan to your specific Dell OptiPlex Micro model. You must verify your desktop is a 7050, 7060, or 7070 Micro form factor. The listing explicitly states it does not fit the 7080, 7040 MFF, or SFF MT Tower series. Incorrect compatibility will prevent installation. You also need to confirm your existing heatsink is the 65W aluminum version. This fan is not designed for 35W heatsink series. Using it with the wrong thermal solution will result in poor cooling performance.
The physical connection uses a 4-pin, 4-wire wire-to-board interface. This plugs directly into the header on your motherboard or the heatsink assembly. The fan operates on 12V DC at 1.10A. This power draw is standard for this class of blower fans. The airflow is rated at 13.95 CFM. This volume pushes air through the heatsink fins to dissipate heat from the CPU.
During everyday use, the fan runs as part of the system’s thermal management. It does not have independent controls or software. Its speed is determined by the motherboard’s PWM or DC control signals. You should include the provided thermal grease when reassembling the cooler. This ensures efficient heat transfer between the processor and the aluminum heatsink. The package includes one fan and one packet of grease. No additional mounting hardware is mentioned. Ensure the blower outlet aligns with the case exhaust path for optimal airflow. The compact dimensions allow it to fit within the tight constraints of the Micro chassis without interfering with other components.
Before You Buy This Fan
You need to verify your Dell OptiPlex model first. This fan fits only the 7050, 7060, and 7070 Micro series. It does not work with the 7080 or 7040 MFF. You must also confirm your heatsink is the 65W aluminum type. The 35W version is incompatible. The listing includes thermal grease, so you do not need to buy extra paste. However, you must source the heatsink separately. The fan attaches directly to your existing heatsink via a 4-pin connector. Check your current fan’s voltage. This unit requires 12V DC. Some older models use 5V. Using the wrong voltage can damage the component. Keep the blower clean. Dust buildup reduces airflow. Wipe the housing gently. This fan is a direct replacement part. It is not a universal CPU cooler. It fits specific Dell micro desktops. It works alongside other thermal paste options for maintenance. Ensure your case has space for the 6.7-inch length. Verify the 4-pin header matches your motherboard. This is a niche part for specific builds.
Check before you buy
- Confirm your desktop is OptiPlex 7050, 7060, or 7070 Micro.
- Verify you have the 65W aluminum heatsink, not the 35W version.
- Check that your motherboard uses a 12V fan header.
- Ensure the 4-pin connector matches your system's power socket.
- Measure case space for the 6.7-inch fan length.
The product at a glance
Deal4GO OptiPlex Micro 65W CPU Blower Fan
Best for: Dell OptiPlex 7050-7070 Micro 65W systems
- System Type
- Desktop
- Features
- Fan
- Dimensions
- 6.7 × 4 × 1.3 inches
- Weight
- 2.47 ounces
View on Amazon: Deal4GO OptiPlex Micro 65W CPU Blower Fan Affiliate link
This Deal4GO fan is a direct replacement for Dell OptiPlex 7050, 7060, and 7070 Micro desktops. It operates on 12V DC and delivers 13.95 CFM of airflow. The unit measures 6.7 by 4 by 1.3 inches and weighs 2.47 ounces. It includes a thermal grease pad for installation. You need this specific model only if you have a 65W aluminum heatsink system. It does not fit 35W series or newer 7080 models.
Pros
- Compatible with Dell OptiPlex 7050, 7060, and 7070 Micro series
- Delivers 13.95 CFM airflow at 12V DC
- Includes thermal grease for easy installation
- Fits standard 65W aluminum heatsink designs
Cons
- Incompatible with OptiPlex 7080 and 35W heatsink series
- Does not include the heatsink assembly
- Limited to specific Dell Micro form factor models
Good fit if
- You own a Dell OptiPlex 7050, 7060, or 7070 Micro
- You need a replacement for a failed 65W cooling fan
- You require a direct 4-pin connection replacement
Skip if
- You have an OptiPlex 7080 or newer model
- You use a 35W heatsink configuration
- You need a complete heatsink and fan assembly
Verdict: Deal4GO 12V CPU Fan for Dell OptiPlex Micro is a precise replacement part for older Dell OptiPlex Micro desktops running 65W processors. It fits users who need a specific airflow spec for legacy systems rather than general-purpose cooling.
Specifications side by side
| Spec | Deal4GO OptiPlex Micro 65W CPU Blower Fan |
|---|---|
| System Type | Desktop |
| Features | Fan |
| Dimensions | 6.7 × 4 × 1.3 inches |
| Weight | 2.47 ounces |
| Color | Black |
| Model | Optiplex Micro (65W) |
Frequently asked questions
Is this fan compatible with Dell OptiPlex 7080 Micro systems?
No, this fan is not compatible with the OptiPlex 7080 Micro. The product data explicitly states it is designed for older 7050, 7060, and 7070 Micro models. Using it on a 7080 will likely result in fitment issues because the chassis dimensions and mounting points differ between these generations.
Does this blower fan work with 35W processors?
This fan is intended for systems running 65W processors. It is designed to cool aluminum heatsinks associated with 65W CPUs in compact desktops. It is not specified for 35W models, so you should verify your system’s thermal design power before purchasing to ensure adequate cooling performance.
What are the exact dimensions of the Deal4GO fan?
The fan measures 6.7 inches in length, 4 inches in width, and 1.3 inches in height. These compact dimensions are typical for blower-style fans used in small form factor desktops. The unit also weighs 2.47 ounces, making it lightweight and easy to handle during installation.
Can I use this fan for a Dell OptiPlex 7040 MFF?
No, this fan does not fit the OptiPlex 7040 MFF. The listing specifies compatibility only with the 7050, 7060, and 7070 Micro series. It is also incompatible with SFF, MT, and Tower series. You must match the fan to the correct Micro generation to ensure proper airflow.
What type of airflow does this fan provide?
This fan delivers 13.95 CFM of airflow at 12V DC and 1.10A. As a blower fan, it directs air in a single direction toward the heatsink fins. This focused airflow is suitable for maintaining temperatures in compact desktop environments where space limits traditional tower cooler options.
Is the fan housing made of metal or plastic?
The product data lists the color as black but does not specify the material composition of the housing. It is described as a fan feature for desktop systems. You should assume standard construction for this class of replacement part, but verify physical details upon receipt if material is critical.
Does this fan include mounting screws?
The provided specifications do not mention the inclusion of mounting screws or additional hardware. The product is listed primarily as a fan unit for Dell OptiPlex Micro systems. You may need to reuse existing screws from your old fan or check with the seller for included fasteners before installation.