Deal4GO 125W LGA1700 CPU Cooler Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for Deal4GO 125W LGA1700 CPU cooler alternatives because your current setup needs specific Dell compatibility or a different thermal profile. The original Deal4GO unit handles 125W TDP chips and fits LGA1700 sockets. It provides 125.82 CFM of airflow in a 5 by 6.1 by 3.8 inch frame. This makes it a solid replacement for Dell Precision 3660 or XPS 8950 towers. However, you might need a different size, socket support, or brand for a new build. Some users prefer modern aftermarket solutions over OEM-style replacements.
We selected these 6 picks because their specifications overlap with your core requirements. The list includes direct LGA1700 replacements like the top-ranked Deal4GO model. It also covers legacy options for older sockets if you are maintaining vintage hardware. You will find compact duct kits for small form factor cases. Each product in this guide is chosen based on its published specs. You can compare dimensions, socket types, and cooling capacities directly. This approach helps you find the right fit without guessing. The goal is to match your technical needs precisely.
Comparing Alternative CPU Coolers
Noctua SFF Foam CPU Cooler Fan Duct Kit
The Noctua NA-FD1 is not a standalone heatsink. It is a fan duct kit designed for small form factor cases with perforated panels. You use it with compatible Noctua low-profile coolers like the NH-L9. It helps optimize airflow to gain up to 5°C of cooling improvement. This accessory does not replace the Deal4GO unit for Dell towers. It lacks the 125W TDP rating and LGA1700 socket compatibility. You should pick this only if you are building a compact PC and already own a suitable Noctua cooler. The Deal4GO is a complete module for desktop replacements, while this is an airflow optimization tool for specific case designs.
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
The StarTech.com FAN370PRO is built for vintage systems. It fits Socket 7 and Socket 370 motherboards. The dimensions are 65x60x45mm. It uses a TX3 connector. This cooler is not suitable for modern LGA1700 processors. It cannot handle the 125W TDP of current CPUs. You should choose this only if you are maintaining retro computing hardware. The Deal4GO unit supports LGA1700 sockets and provides 125.82 CFM of airflow. This StarTech model is a niche solution for enthusiasts preserving old Pentium or Celeron systems. It lacks the versatility required for new desktop builds or Dell Precision tower replacements.
Ultra Socket 775 Copper Core CPU Cooler
The Ultra P4 LGA775 Copper Core Heatsink is designed for legacy LGA 775 platforms. It features a copper core for heat dissipation. The dimensions are 3.7 by 7.1 by 9.7 inches. It weighs 1 pound. This cooler does not fit LGA1700 sockets. You cannot use it with modern Dell Precision or XPS towers. It lacks support for current generation processors. You should buy this only if you are maintaining older hardware with Socket 775 CPUs. The Deal4GO unit is rated for 125W TDP and fits LGA1700. This Ultra model is a functional replacement for outdated systems, offering no compatibility with modern motherboards or higher thermal loads.
Socket 478 Aluminum 70mm CPU Cooler
This Socket 478 Aluminum Heatsink Fan is a specialized component for legacy hardware. It is designed for older Pentium or Celeron systems. It serves as a direct replacement for Socket 478 motherboards. This cooler does not fit LGA1700 sockets. It cannot handle the 125W TDP rating of modern CPUs. You should pick this only if you are repairing vintage PCs. The Deal4GO unit provides 125.82 CFM airflow and fits Dell Precision towers. This StarTech model is a niche solution for retro builders. It lacks the socket compatibility and thermal performance required for current desktop builds or server replacements.
StarTech.com 50mm Socket 7/370 Aluminum Cooler
The StarTech.com FANP1003LD is a Socket 7/370 aluminum cooler. It is black and weighs 8 ounces. The dimensions are 1.61 by 1.97 by 1.97 inches. This unit is intended for retro Socket 7 or 370 systems. It does not fit LGA1700 sockets. It cannot support 125W TDP processors. You should choose this only for maintaining old hardware. The Deal4GO unit is a complete module for Dell desktops with LGA1700 compatibility. This StarTech model is a small, niche component for enthusiasts. It lacks the airflow capacity and socket support needed for modern computing tasks or Dell Precision tower maintenance.
Evercool Wii Cooling Fan
The Evercool Fii Turbo Cooling Fan is designed for Wii console replacement. It is a fan-only unit. It does not include a heatsink. This product is not suitable for computer processor cooling. It lacks the 125W TDP rating and LGA1700 socket compatibility. You cannot use it in Dell Precision or XPS towers. You should pick this only if you need to replace a console fan. The Deal4GO unit is a complete CPU cooling module for desktops. This Evercool product is a specialized console part. It offers no thermal solution for modern CPUs or desktop motherboard replacements.
Quick picks
Our 7 picks
Deal4GO 125W LGA1700 CPU Cooler
Best for: Dell Precision 3660 and XPS 8950 replacements
- Socket Compatibility
- LGA1700
- TDP Rating
- 125W
- Features
- Fan
- Dimensions
- 6.1 × 5 × 3.8 inches
- Weight
- 1.9 pounds
View on Amazon: Deal4GO 125W LGA1700 CPU Cooler Affiliate link
This Deal4GO heatsink is designed for 125W TDP processors on LGA1700 sockets. It features a 12V fan delivering 125.82 CFM airflow via a 4-pin connection. The unit measures 6.1 by 5 by 3.8 inches and weighs 1.9 pounds. It serves as a direct replacement for specific Dell desktop models like the Precision 3660 and XPS 8950. You should verify your existing heatsink configuration before purchase to ensure compatibility.
Pros
- Supports 125W TDP ratings
- Compatible with LGA1700 sockets
- Provides 125.82 CFM airflow
- Uses standard 4-pin power connection
Cons
- Limited to specific Dell desktop models
- Heavy at 1.9 pounds
- Large dimensions may not fit small cases
Good fit if
- You need a replacement for a Dell Precision 3660 or XPS 8950
- You require a cooler for an LGA1700 processor with 125W TDP
- You want a direct fan and heatsink assembly
Skip if
- You use a different desktop brand
- You have a Precision 3680 series system
- You need a cooler for a smaller form factor case
Verdict: Deal4GO 125W LGA1700 CPU Cooler is a suitable replacement part for users maintaining specific Dell desktop towers. It delivers adequate airflow for 125W chips but lacks versatility for other PC builds.
Noctua SFF Foam CPU Cooler Fan Duct Kit
Best for: SFF cases with perforated panels and Noctua NH-L9 coolers
- Features
- Fan
- Dimensions
- 4.72 × 3.9 × 1.89 inches
- Weight
- 1.9 ounces
View on Amazon: Noctua SFF Foam CPU Cooler Fan Duct Kit Affiliate link
The Noctua NA-FD1 is a fan duct kit designed to bridge the gap between your CPU cooler fan and perforated case panels. It uses adjustable EVA foam spacers ranging from 5 to 45mm to direct fresh air into the cooler. This setup can improve cooling performance by up to 5°C. It is a modular solution for small form factor cases, compatible with specific Noctua low-profile coolers like the NH-L9 series.
Pros
- Adjustable EVA foam spacers from 5 to 45mm in 1mm increments
- Improves cooling performance by up to 5°C by directing fresh air
- Compatible with NH-L9i, NH-L9a, and their AM5/17xx variants
- Trusted Noctua quality backed by a 6-year manufacturer’s warranty
Cons
- Only works with specific Noctua low-profile coolers, not all air coolers
- Does not include the CPU cooler itself, only the ducting kit
- Limited to SFF cases with perforated panels, not standard open-air builds
Good fit if
- You use a small form factor case with perforated side panels
- You own a compatible Noctua NH-L9 series low-profile cooler
- You want to maximize airflow efficiency in a tight space
Skip if
- You need a complete CPU cooler and heatsink solution
- You use a standard ATX case with solid side panels
- You have a non-Noctua CPU cooler that lacks compatibility
Verdict: The Noctua NA-FD1 Fan Duct Kit is a specialized accessory for SFF builds using compatible Noctua low-profile coolers. It fits buyers who need to optimize airflow in cases with perforated panels to gain up to 5°C of cooling improvement.
StarTech.com 65x60x45mm Socket 7/370 CPU Cooler
Best for: vintage Socket 7 and 370 systems
- Socket Compatibility
- Socket 7/370
- Features
- Fan
- Weight
- 4.8 ounces
View on Amazon: StarTech.com 65x60x45mm Socket 7/370 CPU Cooler Affiliate link
This StarTech.com cooler is designed for older Socket 7 and 370 processors. It measures 65x60x45mm and weighs 4.8 ounces. The unit includes a fan and uses a TX3 connector. It is suitable for legacy systems that require a specific footprint and mounting style. You should consider this if you are maintaining vintage hardware or need a direct replacement for an older motherboard configuration.
Pros
- Compatible with Socket 7 and 370 processors
- Compact 65x60x45mm dimensions fit small spaces
- Includes integrated fan for airflow
- Uses standard TX3 connector interface
Cons
- Only supports legacy Socket 7 and 370 sockets
- Does not fit modern LGA1700 or AM5 platforms
- Smaller heatsink size limits cooling for high-TDP chips
Good fit if
- You are building or repairing a vintage Socket 7 system
- You need a direct replacement for a Socket 370 motherboard
- You require a compact cooler for an old industrial PC
Skip if
- You have a modern LGA1700 or AM5 processor
- You need cooling for high-performance gaming CPUs
- You require compatibility with Socket 478 or LGA 775
Verdict: StarTech Socket 7/370 65x60x45mm Cooler is a niche solution for retro computing enthusiasts. It fits users maintaining vintage hardware who need a specific TX3 connector and socket compatibility. It is not suitable for modern desktop builds.
Ultra Socket 775 Copper Core CPU Cooler
Best for: Legacy LGA 775 CPU cooling
- Socket Compatibility
- Socket 775
- Fan Speed
- 3600 RPM
- Material
- Copper
- Features
- Fan
- Dimensions
- 9.7 × 3.7 × 7.1 inches
- Weight
- 1 pounds
View on Amazon: Ultra Socket 775 Copper Core CPU Cooler Affiliate link
This Ultra P4 cooler uses a copper core with aluminum fins for LGA 775 processors. It features a fan that runs at 3600 RPM with PWM control for speed adjustment. The sleeve bearing design supports standard desktop builds. You get a 9.7-inch long heatsink that fits most standard cases. This unit is designed for older Socket 775 platforms rather than modern LGA 1700 systems.
Pros
- Copper core heatsink construction for efficient heat transfer
- Aluminum fins provide additional surface area
- PWM fan speed control allows for adjustable airflow
- Fan speed reaches 3600 RPM for active cooling
Cons
- Compatible only with LGA 775 sockets, not LGA 1700
- Uses a sleeve bearing which may have a shorter lifespan than fluid dynamic bearings
- Heatsink height of 7.1 inches may limit clearance with tall RAM modules
Good fit if
- You are upgrading or maintaining an older LGA 775 system
- You need a replacement cooler for a legacy desktop build
- You prefer copper core heatsinks for thermal performance
Skip if
- You have an LGA 1700 motherboard
- You require compatibility with modern Intel sockets
- You are building a new PC with current generation CPUs
Verdict: The Ultra P4 LGA775 Copper Core Heatsink is a functional cooler for legacy LGA 775 platforms. You should buy it only if you are maintaining older hardware, as it lacks support for modern LGA 1700 processors.
Socket 478 Aluminum 70mm CPU Cooler
Best for: Legacy Socket 478 PC maintenance
- Socket Compatibility
- Socket 478
- Fan Size
- 70 mm
- Features
- Fan
View on Amazon: Socket 478 Aluminum 70mm CPU Cooler Affiliate link
This Socket 478 heatsink and fan module supports Intel Pentium processors up to 3.2 GHz and Celeron Dual up to 2.8 GHz. It features a 70 mm aluminum heat sink paired with a 70 x 15 mm sleeve bearing fan. The fan runs at 3500 RPM on 12V power. It connects via a standard 3-pin motherboard connector. This setup is designed for older legacy systems requiring basic cooling for low-power CPUs.
Pros
- Supports Socket 478 Intel Pentium up to 3.2 GHz
- 70 mm sleeve bearing fan rated for 10,000 hours
- Standard 3-pin motherboard connector for easy installation
- Aluminum heat sink construction for efficient heat dissipation
Cons
- Limited to older Socket 478 platform, incompatible with modern CPUs
- Small 70 mm fan size offers less airflow than standard 80 mm or 92 mm fans
- Sleeve bearing fan may have a shorter lifespan compared to ball bearing alternatives
Good fit if
- You are upgrading or repairing a legacy Socket 478 PC
- You need a direct replacement for a failed OEM cooler
- You are building a retro computing project
Skip if
- You have a modern motherboard with LGA1700 or AM5 socket
- You require high-performance cooling for overclocked processors
- You prefer quiet operation with larger, slower-spinning fans
Verdict: Socket 478 Aluminum Heatsink Fan is a specialized component for legacy hardware. It fits users maintaining older Pentium or Celeron systems who need a functional, direct-replacement cooler for Socket 478 motherboards.
StarTech.com 50mm Socket 7/370 Aluminum Cooler
Best for: Socket 7 and Socket 370 retro builds
- Socket Compatibility
- Socket 370, Socket 7
- Fan Size
- 50 mm
- Color
- Black
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 1.97 × 1.61 × 1.97 inches
View on Amazon: StarTech.com 50mm Socket 7/370 Aluminum Cooler Affiliate link
This StarTech.com cooler is designed for legacy Socket 7 and Socket 370 processors. It features a 50 mm fan and an aluminum heatsink. The unit measures 1.61 x 1.97 x 1.97 inches and weighs 8 ounces. It is black and includes a fan for active cooling. You should use this if you are maintaining older hardware that requires specific socket compatibility. It is not suitable for modern LGA1700 systems.
Pros
- Compatible with Socket 7 and Socket 370
- Includes a 50 mm fan
- Aluminum heatsink construction
- Compact dimensions of 1.61 x 1.97 x 1.97 inches
Cons
- Small 50 mm fan size limits airflow
- Only fits legacy Socket 7/370, not modern CPUs
- No mention of PWM fan control
Good fit if
- You need a replacement cooler for a Socket 370 system
- You are building a retro PC with Socket 7 components
- You require a black aluminum heatsink for a specific build
Skip if
- You have a modern LGA1700 or AM5 processor
- You need high airflow for current generation CPUs
- You require a larger 120 mm fan for better cooling
Verdict: StarTech.com Socket 7/370 CPU Cooler is a niche component for retro builders. It fits users maintaining old Socket 7 or 370 systems who need a direct replacement for legacy hardware.
Evercool Wii Cooling Fan
Best for: Wii console fan replacement
- Features
- Fan
View on Amazon: Evercool Wii Cooling Fan Affiliate link
This is a replacement fan for the Nintendo Wii console, not a CPU cooler. It is designed for the Model TG-W1 unit. The product data lists it as a fan feature only. It does not include a heatsink or mounting hardware for computer processors. You should not buy this for desktop or laptop CPU cooling needs.
Pros
- Designed for Wii Model TG-W1
- Replacement fan component
- Evercool brand
Cons
- Not a CPU heatsink or cooler
- No mounting hardware for LGA1700
- No thermal paste included
Good fit if
- You need a fan for a Wii console
- You are repairing a Model TG-W1 unit
- You are sourcing replacement parts for gaming hardware
Skip if
- You need a CPU air cooler
- You want to cool an LGA1700 processor
- You require a heatsink with thermal paste
Verdict: Evercool Fii Turbo Cooling Fan is a console replacement part. It does not fit your needs for computer processor cooling.
Specifications side by side
| Spec | Deal4GO 125W LGA1700 CPU Cooler | Noctua SFF Foam CPU Cooler Fan Duct Kit | StarTech.com 65x60x45mm Socket 7/370 CPU Cooler | Ultra Socket 775 Copper Core CPU Cooler | Socket 478 Aluminum 70mm CPU Cooler | StarTech.com 50mm Socket 7/370 Aluminum Cooler | Evercool Wii Cooling Fan |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | LGA1700 | not stated | Socket 7/370 | Socket 775 | Socket 478 | Socket 370, Socket 7 | not stated |
| Fan Size | not stated | not stated | not stated | not stated | 70 mm | 50 mm | not stated |
| TDP Rating | 125W | not stated | not stated | not stated | not stated | not stated | not stated |
| Fan Speed | not stated | not stated | not stated | 3600 RPM | not stated | not stated | not stated |
| Color | Black | Black | Black | not stated | not stated | Black | not stated |
| Material | not stated | not stated | not stated | Copper | not stated | Aluminum | not stated |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 6.1 × 5 × 3.8 inches | 4.72 × 3.9 × 1.89 inches | not stated | 9.7 × 3.7 × 7.1 inches | not stated | 1.97 × 1.61 × 1.97 inches | not stated |
| Weight | 1.9 pounds | 1.9 ounces | 4.8 ounces | 1 pounds | not stated | 8 ounces | not stated |
| Model | 125W CPU Cooling Fan Heatsink | NA-FD1 | FAN370PRO | ult31797 | not stated | FANP1003LD | not stated |
| Size | not stated | One Size | 65x60x45mm | not stated | not stated | not stated | not stated |
Frequently asked questions
Can I use these alternatives on modern LGA 1700 motherboards?
Only the Deal4GO unit is designed for LGA 1700 sockets. The other products on this list target legacy platforms like Socket 7, Socket 370, Socket 478, or LGA 775. You must verify socket compatibility before purchasing. Most alternatives here are niche replacements for vintage hardware and will not fit current desktop processors.
Is the Noctua NA-FD1 a standalone CPU cooler?
No, the Noctua NA-FD1 is a fan duct kit, not a heatsink. It is an accessory for small form factor cases with perforated panels. You use it alongside compatible Noctua low-profile coolers, such as the NH-L9. It helps optimize airflow to gain up to 5°C of cooling improvement in tight builds.
What is the best budget option for retro Socket 7 systems?
The StarTech.com 65x60x45mm Socket 7/370 CPU Cooler is the best budget choice for vintage hardware. It is a niche solution for retro computing enthusiasts who need specific TX3 connector compatibility. This unit is not suitable for modern desktop builds and is intended strictly for maintaining older Socket 7 or 370 systems.
Does the Ultra P4 LGA775 Cooler work with LGA 1700 CPUs?
No, the Ultra P4 LGA775 Copper Core Heatsink lacks support for modern LGA 1700 processors. It is a functional cooler designed exclusively for legacy LGA 775 platforms. You should only buy this unit if you are maintaining older hardware. It does not fit current generation Intel desktop sockets.
Which cooler is best for maintaining legacy Socket 478 PCs?
The Socket 478 Aluminum 70mm CPU Cooler is a specialized component for legacy hardware maintenance. It fits users who need a functional, direct-replacement cooler for older Socket 478 motherboards. This unit is ideal for maintaining older Pentium or Celeron systems and is not designed for modern computing platforms.
Can I use the Evercool Wii fan for my desktop CPU?
No, the Evercool Fii Turbo Cooling Fan is a console replacement part. It does not fit your needs for computer processor cooling. This product is designed specifically for Nintendo Wii consoles. You should look for a dedicated CPU heatsink and fan combination for desktop tower maintenance instead.
What are the dimensions of the Deal4GO 125W cooler?
The Deal4GO 125W LGA1700 CPU Cooler measures 6.1 inches in length, 5 inches in width, and 3.8 inches in height. It weighs 1.9 pounds and features a black finish. These dimensions allow it to serve as a suitable replacement part for specific Dell desktop towers like the Precision 3660 and XPS 8950.