Bitspower Atlas PRO 360TR Threadripper Alternatives: 5 Similar Picks Compared

How alternatives compare to Bitspower

Bitspower Atlas PRO 360TR Threadripper Alternatives

This air cooler replaces the liquid loop with a passive, maintenance-free design. It measures 11.8 inches long and weighs just 1.76 pounds, making it significantly smaller and lighter than the 16.7-inch, 4.28-pound Bitspower unit. The 1500 RPM fan prioritizes silence over raw airflow, which is a trade-off for the 2500 RPM fans in the original. It fits TRX50 sockets but sacrifices the high cooling capacity needed for sustained heavy rendering workloads. You should choose this if your case has tight length constraints or if you want a quieter, simpler setup for general workstation tasks rather than extreme thermal stress.

ASRock WS TR 360D 360mm Dual-Pump Liquid Cooler

The ASRock model targets TR5 sockets rather than the TRX50 platform supported by the Bitspower cooler. It weighs 8 pounds, nearly double the weight of the Bitspower unit, indicating a heavier construction. This dual-pump design aims for redundancy, offering reliability for continuous workloads where downtime is unacceptable. It lacks the specific TRX50 compatibility of the original, so it is only suitable for TR5 Threadripper systems. If you are building a high-end workstation on the TR5 platform and need redundant liquid cooling for maximum uptime, this is a strong alternative, though it does not fit the TRX50 sockets used by the Bitspower Atlas PRO.

GOPCZTYZL AK620 Digital CPU Cooler

This white air cooler is designed for AM4 or AM5 sockets, not the Threadripper TRX50 or TR5 platforms. It uses six heat pipes and features a white aesthetic, prioritizing color matching over the black finish of the Bitspower unit. It is an air cooler, so it does not require a radiator or liquid, but it lacks the cooling headroom for heavy Threadripper workloads. The GOPCZTYZL AK620 is suitable for standard desktop builds where thermal demands are lower. You should pick this if you are building an AM4 or AM5 system with a white theme, but it is not a viable alternative for Threadripper users due to socket incompatibility.

GOPCZTYZL IS-67-XT 67mm Low Profile Cooler

This low-profile cooler stands only 67mm tall, making it suitable for small ITX cases where the 5.5-inch height of the Bitspower pump block would not fit. It includes RGB lighting, a feature absent in the standard Bitspower model. However, it is designed for AM4, AM5, LGA 1700, and LGA 1200 sockets, excluding Threadripper platforms entirely. The cooling capacity is limited by its small size, making it inadequate for high-core-count processors. Choose this if you are building a compact system on a consumer socket and need RGB aesthetics, but it cannot replace the Bitspower cooler for Threadripper workstations due to socket and thermal limitations.

SLXKSGALM Low-Profile 6 Heatpipe Cooler

The SLXKSGALM cooler uses six heat pipes and supports AM4, AM5, LGA 1700, and LGA 1200 sockets. It is a low-profile air cooler intended for tight spaces, unlike the large liquid cooler from Bitspower. It lacks the TRX50 compatibility required for Threadripper systems, so it is only useful for consumer desktop builds. The design prioritizes case fitment over peak thermal performance, offering basic cooling rather than the robust heat dissipation needed for heavy rendering. You should select this for small form-factor builds on standard sockets where space is the primary constraint, but it is not a functional alternative for Threadripper users due to socket incompatibility and lower cooling power.

Quick picks

Our 6 picks

1 Best overall

Bitspower Atlas PRO 360TR Threadripper AIO

Best for: Threadripper TRX50 heavy workloads

Socket Compatibility

Socket TR5/SP6, TRX50

Fan Size

120mm

Fan Speed

2,500 RPM

Dimensions

16.7 × 6.1 × 5.5 inches

Weight

4.28 pounds

View on Amazon: Bitspower Atlas PRO 360TR Threadripper AIO Affiliate link

This is a 360mm liquid cooler built for AMD Threadripper TRX50 platforms. It uses a 360mm radiator with an integrated pump and three 120mm fans running at 2,500 RPM. The CPU block is optimized for large processor surfaces. It weighs 4.28 pounds and measures 16.7 inches long. You should choose this if you need reliable cooling for heavy rendering or simulation workloads on compatible TR5 or SP6 sockets.

Pros

• 360mm radiator size for high heat dissipation
• Fans run at 2,500 RPM for strong airflow
• Optimized CPU block for large Threadripper surfaces
• Built-in fan guards for safety

Cons

• 4.28 pounds weight may strain some cases
• 16.7 inches length requires large case support
• Limited to TR5, SP6, and TRX50 sockets

Good fit if

• You use a Threadripper TRX50 or TR5 CPU
• You run heavy rendering or simulation tasks
• You have a large case for the 360mm radiator

Skip if

• You use a standard consumer AM5 or LGA socket
• You need a low-profile ITX build
• You want a compact 240mm radiator size

Verdict: Bitspower Atlas PRO 360TR Threadripper AIO is a heavy-duty liquid cooler for Threadripper users. It fits professionals running heavy workloads who have the case space for its 360mm radiator and 16.7-inch length.

2 Best budget

Bitspower Atlas PRO 360TR Threadripper Alternatives

Best for: Quiet TRX50 workstation builds with space constraints

Fan Speed

1500RPM

Color

Black

Features

Fan

Dimensions

11.8 × 7.87 × 3.94 inches

Weight

1.76 pounds

View on Amazon: Bitspower Atlas PRO 360TR Threadripper Alternatives Affiliate link

This air cooler is a chromax.Black version of the Noctua NH-D15. It measures 11.8 by 7.87 by 3.94 inches and weighs 1.76 pounds. The fan runs at 1500 RPM. It uses a 4-pin connection. This model suits users who need a compact dual-tower solution for TRX50 or similar workstations. It offers a quiet operation profile with a black finish.

Pros

• Chromax.Black color scheme for a uniform dark look
• Compact 11.8-inch length fits smaller cases
• Fan speed capped at 1500 RPM for quiet operation
• Standard 4-pin PWM fan connection

Cons

• Short 90-day warranty compared to industry standards
• Air cooler design lacks the heat removal capacity of liquid solutions
• Single fan speed limit may not suit high-TDP Threadripper loads

Good fit if

• You need a low-profile air cooler for a TRX50 workstation
• You prefer a black finish to match other components
• You prioritize quiet operation over maximum cooling performance

Skip if

• You require a liquid cooling solution for extreme workloads
• You need a warranty longer than 90 days
• You want a dual-fan setup for higher airflow

Verdict: Bitspower Atlas PRO 360TR Threadripper Alternatives is a compact air cooler with a black finish and 1500 RPM fan. It fits users who need a quiet, space-saving solution for Threadripper systems but do not require liquid cooling.

3 Also great

ASRock WS TR 360D 360mm Dual-Pump Liquid Cooler

Best for: Threadripper TR5 workstation reliability

Socket Compatibility

TR5, sTR5

System Type

Workstation

Weight

8 pounds

View on Amazon: ASRock WS TR 360D 360mm Dual-Pump Liquid Cooler Affiliate link

This ASRock liquid cooler targets AMD Threadripper TR5 and sTR5 workstations. It features a 38mm high-density radiator and dual-pump redundancy for sustained heavy loads. The brazed copper cold plate and IP54-rated fans support 24/7 operation. You get silent 0dB cooling under low load. The 8-pound build requires chassis clearance for the 360mm radiator.

Pros

• Dual-pump redundancy with audible failure alarm
• 38mm high-density radiator for superior heat dissipation
• IP54 water and dust resistant fans
• 0dB silent mode at low loads

Cons

• 8-pound weight limits mounting options
• Specific to TR5/sTR5 sockets only
• Requires 360mm radiator clearance

Good fit if

• You use an AMD Threadripper TR5 or sTR5 workstation
• You need redundancy for 24/7 heavy workloads
• You have space for a 38mm thick radiator

Skip if

• You use consumer AM4 or AM5 sockets
• You have a compact ITX case with limited clearance
• You need silent operation without fan stop features

Verdict: ASRock WS TR 360D Threadripper Workstation Cooler fits professionals who need redundant cooling for high-core Threadripper TR5 systems. It delivers reliable thermal performance for continuous workloads where downtime is not an option.

4 Best premium

GOPCZTYZL AK620 Digital CPU Cooler

Best for: White themed AM4 or AM5 builds

Socket Compatibility

2011 V3, AM4, AM5, 1700, 2066, 115X

Heat Pipes

6

Color

White

View on Amazon: GOPCZTYZL AK620 Digital CPU Cooler Affiliate link

This white air cooler uses six heat pipes to move heat away from the CPU. It supports sockets 2011 V3, AM4, AM5, 1700, 2066, and 115X. The white finish helps you match a clean build. You get a standard air cooling solution without liquid loops. It fits mainstream and workstation platforms.

Pros

• Six heat pipes for heat transfer
• White digital design for aesthetics
• Supports AM4, AM5, and 1700 sockets
• Compatible with 2011 V3 and 2066

Cons

• No fan speed or RPM data provided
• No cooling performance metrics listed
• Brand is unknown to most builders

Good fit if

• You want a white CPU cooler
• You use AM4, AM5, or LGA 1700
• You prefer air cooling over liquid

Skip if

• You need verified cooling performance numbers
• You require a known brand name
• You want detailed fan specifications

Verdict: GOPCZTYZL AK620 Digital White Air Cooler offers a white aesthetic with six heat pipes. It suits builders who prioritize color matching over verified performance data for AM4 or AM5 systems.

5 Best rgb

GOPCZTYZL IS-67-XT 67mm Low Profile Cooler

Best for: ITX builds needing low height and RGB

Cooler Height

67mm

Heat Pipes

6

Tower Design

Low-Profile

Lighting

RGB

System Type

ITX

View on Amazon: GOPCZTYZL IS-67-XT 67mm Low Profile Cooler Affiliate link

This IS-67-XT is a low-profile air cooler designed for ITX systems. It stands 67mm tall and uses six heat pipes to move heat away from the processor. The unit includes RGB lighting for visual customization. It fits small form factor cases where height is restricted. You should choose this if you need a compact solution that still offers active cooling for your CPU.

Pros

• 67mm height fits tight cases
• Six heat pipes for heat transfer
• Includes RGB lighting
• Designed for ITX systems

Cons

• Low-profile design limits max cooling potential
• No mention of fan speed control specs
• Generic brand with limited support info

Good fit if

• You are building an ITX PC
• You need a cooler under 70mm tall
• You want RGB lighting in a small build

Skip if

• You need high-end cooling for heavy workloads
• You require a tall tower for airflow
• You prefer a known major brand

Verdict: The GOPCZTYZL IS-67-XT 67mm Low Profile CPU Cooler is a compact option for ITX builders who need RGB lighting and a low height. It fits small cases but lacks the cooling power of larger towers.

6 Best lga 1700

SLXKSGALM Low-Profile 6 Heatpipe Cooler

Best for: Small ITX cases with LGA 1700 or AM5

Socket Compatibility

LGA 1700/1200/2011, AM4/AM5

Heat Pipes

6

Tower Design

Low-Profile

Fan Size

120mm

System Type

ITX

Features

Fan

View on Amazon: SLXKSGALM Low-Profile 6 Heatpipe Cooler Affiliate link

This low-profile air cooler uses six copper heat pipes to transfer heat from the CPU to the aluminum fins. It supports LGA 1700, LGA 1200, AM4, and AM5 sockets. The design fits small ITX cases where tall coolers do not. It includes a PWM fan for speed control. This option suits users who need broad socket support in a compact tower.

Pros

• Six heat pipes for efficient heat transfer
• Supports LGA 1700, LGA 1200, AM4, and AM5 sockets
• Low-profile tower design fits small ITX cases
• PWM fan allows for speed adjustment

Cons

• Low-profile design limits maximum cooling performance compared to large towers
• No mention of included thermal paste or mounting hardware
• Fan specifications like airflow and noise levels are not provided

Good fit if

• You are building a small form-factor ITX PC
• You need a cooler that supports LGA 1700 or AM5 sockets
• You have limited case height clearance for CPU coolers

Skip if

• You require maximum cooling performance for high-end overclocking
• You need a cooler with detailed fan noise and airflow ratings
• You are building a standard ATX tower with ample space

Verdict: SLXKSGALM Low Profile 6-Heatpipe Cooler offers basic cooling for LGA 1700 and AM5 builds in tight spaces. It fits users who prioritize case compatibility over peak thermal performance.

Specifications side by side

Frequently asked questions

See also

• amd ryzen threadripper pro 3975wx alternatives
• linksys mx5502 atlas pro 6 alternatives