15 Best Thermalright CPU Coolers with ARGB, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the right thermalright CPU cooler with ARGB depends on your case clearance, heat pipe configuration, and processor socket. We compared 15 models based strictly on the specifications published on their listings.
The Thermalright Assassin X 120 ARGB CPU Cooler takes top pick because its compact 148mm tower height and four heat pipes deliver dependable cooling up to a 225W TDP. This guide helps you choose the right heatsink height, heat pipe layout, and motherboard socket compatibility for your build.
Quick picks
The best fit for you
- You need balanced ARGB cooling for standard mid-tower builds Thermalright Assassin X 120 ARGB CPU Cooler This cooler features four heat pipes and a 148mm tower design rated for up to 225W TDP.
- You want dual-tower cooling for a white high-TDP processor Thermalright Peerless Assassin 120 SE White ARGB It combines six heat pipes with dual towers to support up to 265W TDP within a 155 mm cooler height.
- You build a small-form-factor case with tight height limits Thermalright AXP120-X67 White ARGB Cooler Its low-profile 67mm height and six heat pipes provide compact thermal management for space-restricted cases.
Our 15 picks
Thermalright Assassin X 120 ARGB CPU Cooler
Best for: balanced ARGB cooling in mid-tower builds
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- TDP Rating
- 125 to 225 W
The Thermalright Assassin X 120 ARGB CPU Cooler is a single-tower air cooler fitted with a 120mm ARGB PWM fan. It features four 6mm heat pipes and handles processor thermal design power from 125W to 225W. Standing 148mm tall, it fits medium-sized computer cases easily while keeping noise at or below 25.6 dB(A). It suits you if you want customizable lighting and dependable cooling for mainstream Intel or AMD processors.
Pros
- Compact 148mm height fits medium-sized PC cases
- Four 6mm heat pipes rated for 125W to 225W TDP
- TL-C12C-S fan delivers up to 66.17 CFM airflow
- Quiet operation with a maximum noise rating of 25.6 dB(A)
Cons
- Equipped with a single fan rather than a dual-fan setup
- Features four heat pipes instead of five or six
Good fit if
- You have a medium-sized case that requires a cooler height under 150mm.
- You run an Intel or AMD processor with a TDP rating between 125W and 225W.
- You want integrated ARGB lighting operating on a standard 4-pin PWM header.
Skip if
- You need a dual-fan cooling system designed for loads exceeding 225W TDP.
- You use an unlisted CPU socket that lacks included mounting hardware.
Verdict: Thermalright Assassin X 120 ARGB CPU Cooler delivers balanced airflow and addressable RGB illumination within a compact 148mm tower design. It offers dependable cooling capability up to 225W TDP for standard desktop builds.
Thermalright Peerless Assassin 120 SE White ARGB
Best for: white-themed high-TDP dual-tower builds
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1851, 1200
- Cooler Height
- 155mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 SE White ARGB
The Thermalright Peerless Assassin 120 SE White ARGB is a dual-tower air cooler equipped with six 6 mm copper heat pipes and two 120 mm ARGB PWM fans. It handles power loads between 120W and 265W TDP while operating at or below 25.6 dB(A). With a 155 mm installed height, this cooler suits you if you need robust multi-socket cooling for modern AMD or Intel processors in a white-themed PC case.
Pros
- Rated for 120W to 265W TDP thermal dissipation
- Six 6 mm AGHP copper heat pipes prevent orientation performance loss
- Twin 120 mm PWM fans push up to 66.17 CFM of airflow
- Fan noise rated at or below 25.6 dB(A)
Cons
- Total height of 155 mm requires a mid-tower or full-tower chassis
- Dual-tower 135 mm width can sit close to tall memory modules
Good fit if
- You want a white dual-tower cooler rated for up to 265W TDP.
- You have at least 155 mm of cooler clearance inside your computer case.
- You use an AMD AM4/AM5 or Intel LGA 1200/1700/1851 motherboard.
Skip if
- You build inside a compact small-form-factor case with tight height limits.
- You want a single-tower heatsink that leaves extra clearance around RAM slots.
Verdict: Thermalright Peerless Assassin 120 SE White ARGB delivers dual-tower cooling with six heat pipes and addressable RGB lighting for high-power processors. It fits builders who need up to 265W TDP capacity without exceeding a 155 mm cooler height.
Thermalright Peerless Assassin 120 White ARGB
Best for: high-heat processors in white PC builds
- Lighting
- ARGB (what this guide is about)
- Cooler Height
- 157 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- TDP Rating
- 245 W
View on Amazon: Thermalright Peerless Assassin 120 White ARGB
This is a dual-tower white CPU cooler with two 120mm ARGB fans and six 6mm copper heat pipes. It features a 245W TDP rating and an offset heatsink layout designed to clear your first expansion slot and memory modules. The twin heatsinks provide 9,600 square centimeters of surface area with reflow soldered fins. It suits you if you need substantial thermal headroom and synchronized lighting for a white build.
Pros
- 245W TDP rating with six 6mm copper heat pipes
- Dual 120mm PWM ARGB fans delivering up to 66.17 CFM
- 9,600 cm² heat dissipation area with reflow welding
- Offset asymmetric layout preserves RAM and top PCIe slot clearance
Cons
- 157mm height requires checking your case clearance
- Total weight of 1.02 kg adds notable mass to the motherboard
Good fit if
- You need a 245W TDP dual-tower cooler for high-heat processors.
- You want a white heatsink with motherboard-synchronized ARGB lighting.
- You require an offset layout to clear your memory modules and first PCIe slot.
Skip if
- You have a compact PC case with less than 157mm of cooler height clearance.
- You prefer a lighter single-tower cooler rather than a 1.02 kg dual-tower heatsink.
Verdict: Thermalright Peerless Assassin 120 White ARGB delivers dual-tower cooling with a 245W TDP rating, six heat pipes, and two 120mm ARGB fans. It is a capable choice if you need maximum cooling performance and motherboard-controlled lighting for white PC builds.
Thermalright Peerless Assassin 120 White ARGB Cooler
Best for: white PC builds needing dual-tower cooling
- Lighting
- ARGB (what this guide is about)
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Peerless Assassin 120 White ARGB Cooler
The cooler is a dual-tower white heatsink with addressable RGB lighting. It features six 6 mm copper heat pipes and two 120 mm PWM fans that deliver up to 66.17 CFM of airflow at 25.6 dB(A) or less. At 155 mm tall, it fits standard mid-tower computer cases. This setup suits you if you run modern Intel or AMD processors and want high dual-fan airflow inside a color-matched white PC build.
Pros
- Dual 120 mm PWM fans push up to 66.17 CFM of airflow
- Six 6 mm sintered copper heat pipes with AGHP technology
- Low maximum fan noise rating of 25.6 dB(A)
- Wide socket support including Intel LGA 1700, LGA 1851, and AMD AM4, AM5
Cons
- 155 mm overall height requires sufficient chassis clearance
- 135 mm width can crowd space around tall memory modules
Good fit if
- You want dual-tower cooling in an all-white build with ARGB lighting.
- You have a PC case that supports coolers at least 155 mm tall.
- You use an Intel LGA 1700/1851 or AMD AM4/AM5 processor.
Skip if
- You need a low-profile heatsink for a compact small-form-factor case.
- You prefer an all-black heatsink setup without lighting.
Verdict: Thermalright Peerless Assassin White ARGB Cooler delivers dual-tower performance using two 120 mm fans and six copper heat pipes. It gives you balanced thermal control and ARGB lighting for current Intel and AMD sockets.
Thermalright Assassin X 120 ARGB Cooler
Best for: compact mid-tower builds needing ARGB lighting
- Lighting
- ARGB (what this guide is about)
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
This Thermalright cooler is a compact single-tower air cooler fitted with a 120mm ARGB fan and four 6mm copper heat pipes. Standing 148mm tall, it fits easily inside mid-sized cases while clearing standard components. The included PWM fan tops out at 1550 RPM, pushing up to 66.17 CFM of airflow at 25.6 dB(A). It suits you if you need a straightforward cooler for standard Intel or AMD desktop processors.
Pros
- Four 6mm copper heat pipes with AGHP technology
- Compact 148mm height fits mid-sized cases
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Broad socket support including AM4, AM5, and LGA 1700
Cons
- Includes only a single fan rather than a dual-fan setup
- Four heat pipes offer less contact area than larger six-pipe coolers
Good fit if
- You have a mid-sized chassis that requires a cooler height under 150mm.
- You want addressable RGB lighting integrated into a single 120mm fan.
- You run a compatible Intel LGA1700/1851 or AMD AM4/AM5 processor.
Skip if
- You need a dual-tower heatsink for heavy thermal dissipation.
- You prefer a cooler with more than four heat pipes.
Verdict: Thermalright Assassin X 120 ARGB Cooler delivers balanced single-tower cooling with a 148mm profile and an addressable RGB fan. It provides dependable thermal performance for mainstream desktop sockets without taking up excess space.
Thermalright Burst Assassin 120 ARGB
Best for: compact mid-tower builds needing six heat pipes
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700/1851/1150/1151/1200
- Cooler Height
- 154 mm
- Heat Pipes
- 6
- Tower Design
- Single-Tower
- Fan Size
- 120 mm
The Thermalright Burst Assassin 120 ARGB is a single-tower CPU cooler equipped with six 6mm heat pipes and a pure copper base. Its 154mm height fits standard mid-tower cases while leaving space around motherboard components. With a 120mm PWM fan delivering up to 66.17 CFM at 25.6 dBA and integrated ARGB lighting, it suits you if you need dense heat-pipe coverage without the bulk of a dual-tower heatsink.
Pros
- Six 6mm pure copper heat pipes with AGHP technology
- Compact 154mm height fits medium-sized chassis
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Quiet fan profile rated at 25.6 dBA maximum noise
Cons
- Single heatsink tower provides less surface area than dual-tower models
- Includes only one 120mm fan rather than a push-pull setup
Good fit if
- You want a single-tower heatsink configured with six heat pipes.
- You need a cooler under 155mm to clear your computer case side panel.
- You run an Intel LGA 1700/1851 or AMD AM4/AM5 processor socket.
Skip if
- You want the cooling capacity of a dual-tower heatsink.
- You need a low-profile cooler designed for small-form-factor cases.
Verdict: Thermalright Burst Assassin 120 ARGB CPU Cooler delivers six heat pipes and addressable lighting in a 154mm single-tower design. It provides reliable airflow and wide socket compatibility without crowding memory slots or motherboard headers.
Thermalright Peerless Assassin 120 SE White ARGB
Best for: white desktop builds needing dual-tower airflow
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- Intel 115X/1200/1700/1851, AMD AM4/AM5
- Cooler Height
- 155 mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 SE White ARGB
This dual-tower air cooler features six 6mm heat pipes, an aluminum fin stack, and two 120mm PWM ARGB fans. Running up to 1550 RPM, each fan pushes up to 66.17 CFM of airflow while keeping noise at or below 25.6 dB(A). You get mounting hardware for AMD AM4, AM5, and Intel LGA 1700 and 1851 sockets. It suits you if you want high-airflow dual-tower cooling for a white-themed system.
Pros
- Six 6mm copper heat pipes with AGHP technology
- Dual 120mm PWM fans produce up to 66.17 CFM airflow
- Operating sound level rated at or below 25.6 dB(A)
- Wide socket support covering Intel LGA 1700, 1851, and AMD AM5
Cons
- Height of 155mm requires sufficient PC case clearance
- Dual-tower footprint covers more motherboard space than single-tower designs
Good fit if
- You want dual-tower cooling performance in an all-white build with ARGB lighting.
- You run modern desktop processors on AMD AM5, AM4, or Intel LGA 1700/1851 sockets.
- You need high airflow while maintaining noise levels under 26 dB(A).
Skip if
- You use a compact PC chassis with under 155mm of CPU cooler clearance.
- You prefer an unobscured view of tall RGB RAM modules.
Verdict: Thermalright Peerless Assassin 120 SE White ARGB pairs six heat pipes with dual PWM fans to deliver dependable dual-tower airflow. It gives your white desktop build strong thermal dissipation while keeping sound output at or below 25.6 dB(A).
Thermalright Assassin King 120 SE White ARGB
Best for: mid-sized white builds needing low cooler height
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 1700, 1851, 1200, 115X
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
View on Amazon: Thermalright Assassin King 120 SE White ARGB
The Thermalright Assassin King 120 SE White ARGB is a single-tower CPU air cooler designed for compact clearance and balanced airflow. It features five 6mm heat pipes paired with an aluminum fin stack and stands 148mm tall. Its included 120mm PWM fan delivers up to 66.17 CFM of airflow at noise levels under 25.6 dB(A). You get integrated ARGB lighting and broad socket support for mid-sized white desktop builds.
Pros
- Five 6mm heat pipes with AGHP technology for orientation flexibility
- Compact 148mm overall height fits mid-sized cases
- Low maximum fan noise rating of 25.6 dB(A)
- 120mm PWM fan moves up to 66.17 CFM of air
Cons
- Includes only a single fan rather than a dual-fan setup
- Top fan speed is capped at 1550 RPM
Good fit if
- You need a white CPU cooler under 150mm in height for a mid-sized chassis.
- You run a compatible Intel LGA 1700/1851 or AMD AM4/AM5 processor.
Skip if
- You want a dual-fan or dual-tower cooler for heavy thermal loads.
- You prefer an all-black aesthetic over a white heatsink and fan.
Verdict: Thermalright Assassin King 120 SE White ARGB provides five heat pipes and addressable RGB lighting in a compact 148mm profile. It is a reliable, quiet option for white mid-tower systems needing moderate cooling clearance.
Thermalright 67mm Low-Profile White ARGB Cooler
Best for: compact PC cases with tight cooler clearance
- Lighting
- ARGB (what this guide is about)
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright 67mm Low-Profile White ARGB Cooler
This low-profile CPU cooler stands 67mm tall and pairs an all-white heatsink with addressable RGB lighting. You get six 6mm heat pipes, a copper base, and a slim 15mm-thick 120mm PWM fan that reaches 1,800 RPM and 59 CFM. It generates up to 26.1 dB(A) of noise. If you build a compact desktop needing top-down airflow, this fits small clearances with ARGB lighting.
Pros
- Low 67mm total height for small-form-factor cases
- Six 6mm copper heat pipes with pure copper base
- Slim 120mm PWM fan with 5V 3-pin ARGB support
- Quiet operation rated at 26.1 dB(A) or below
Cons
- No listed support for AMD AM5 sockets
- Slim 15mm fan produces lower maximum airflow than standard 25mm fans
Good fit if
- You need a low-profile cooler under 70mm in height.
- You want an all-white cooler with addressable RGB lighting.
- You use a supported Intel platform or an AMD AM4 socket.
Skip if
- You are building with an AMD AM5 processor.
- You have room in your case for a full-size tower cooler.
Verdict: Thermalright 67mm Low-Profile White ARGB Cooler delivers six heat pipes and addressable RGB illumination in a compact 67mm design. It provides a solid cooling option for tight chassis configurations that cannot accommodate standard tower heatsinks.
Thermalright AXP120-X67 White ARGB Cooler
Best for: small-form-factor builds needing low-profile cooling
- Lighting
- ARGB (what this guide is about)
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
The Thermalright AXP120 Low Profile ARGB Cooler is a compact white CPU cooler built for tight desktop cases. At 67mm in total height, it pairs a pure copper base with six 6mm heat pipes and an aluminum fin stack. You get a slim 15mm PWM fan with 5V 3-pin ARGB lighting that runs up to 1,800 RPM. This setup suits you if you need low-clearance cooling for compatible Intel or AMD AM4 builds.
Pros
- Compact 67mm total height fits small-form-factor cases
- Six 6mm copper heat pipes with pure copper base
- Slim 120mm PWM fan includes 5V 3-pin ARGB lighting
- Quiet operation rated at 26.1 dB(A) or lower
Cons
- No AMD AM5 socket support listed in specifications
- Maximum airflow tops out at 59 CFM due to thin 15mm fan
Good fit if
- You build in a small-form-factor case with at least 67mm of clearance
- You want addressable RGB lighting in a white low-profile design
- You use a compatible Intel socket or an AMD AM4 processor
Skip if
- You use an AMD AM5 motherboard
- You have clearance for a standard tower cooler with higher airflow
Verdict: Thermalright AXP120 Low Profile ARGB Cooler delivers 67mm low-clearance cooling with six heat pipes and addressable RGB lighting. It provides a compact thermal solution for compatible Intel and AMD AM4 systems.
Thermalright 67mm Low Profile White ARGB Cooler
Best for: compact white small-form-factor PC builds
- Lighting
- ARGB (what this guide is about)
- Cooler Height
- 67mm
- Heat Pipes
- 6
- Tower Design
- Low-Profile
- Fan Size
- 120mm
- Fan Speed
- 1800 RPM
View on Amazon: Thermalright 67mm Low Profile White ARGB Cooler
The Thermalright 67mm Low-Profile White ARGB Cooler is a compact heatsink designed for tight cases. At 67mm tall, it fits compact enclosures while offering six 6mm heat pipes and a pure copper base. Its 120mm slim PWM fan delivers up to 59 CFM of airflow at 26.1 dB(A) with addressable RGB lighting. You get full clearance for compact builds without losing multi-socket Intel and AMD compatibility.
Pros
- Low-profile 67mm total height for small form factor builds
- Six 6mm copper heat pipes with pure copper base
- Slim 15mm-thick PWM fan with 5V 3-pin ARGB lighting
- Supports modern Intel LGA1700/1851 and AMD AM4/AM5 sockets
Cons
- Slim 15mm fan moves less air (59 CFM max) than full-thickness 25mm fans
- Horizontal layout covers a 123.5mm by 120mm footprint over the motherboard
Good fit if
- You build inside a compact case with under 70mm of CPU clearance.
- You want addressable RGB lighting paired with an all-white heatsink and fan.
- You need native bracket support for Intel LGA1700/1851 or AMD AM4/AM5 sockets.
Skip if
- You have space in your case for a full-height tower cooler.
- You lack a 5V 3-pin header to control the ARGB lighting.
Verdict: Thermalright 67mm Low-Profile White ARGB Cooler delivers reliable cooling for space-constrained builds using six heat pipes and a 15mm slim ARGB fan. It gives you balanced airflow and low noise without exceeding 67mm in total height.
Thermalright Assassin King 120 SE ARGB
Best for: mid-tower cases needing balanced five-pipe cooling
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA 1700, 1200, 1150, 1151
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM
The Thermalright Assassin King 120 SE ARGB is a single-tower CPU cooler equipped with five 6mm heat pipes and a 120mm PWM fan. Standing at 148mm tall, it fits cases with limited vertical clearance while still delivering up to 66.17 CFM of airflow. If you need addressable RGB lighting, acoustic output capped at 25.6 dB(A), and broad socket support, this model serves your build.
Pros
- Compact 148mm overall height suits mid-sized cases
- Five 6mm heat pipes with AGHP III technology
- Quiet fan operation capped at 25.6 dB(A)
- Delivers maximum airflow of 66.17 CFM
Cons
- Single-fan setup rather than dual-fan configuration
- Supports standard desktop sockets but excludes HEDT platforms
Good fit if
- You need a tower cooler under 150mm for mid-sized case clearance.
- You run an AMD AM4/AM5 or Intel LGA 115X/1200/1700 processor.
- You want 5 heat pipes paired with integrated ARGB illumination.
Skip if
- You need a dual-fan cooler for higher heat dissipation.
- You require a low-profile cooler well under 148mm for small-form-factor builds.
Verdict: Thermalright Assassin King 120 SE ARGB delivers capable single-tower cooling with five heat pipes and a manageable 148mm height. It provides reliable airflow and ARGB lighting for mainstream desktop sockets without demanding excessive case clearance.
Thermalright Assassin King 120 White ARGB
Best for: white mid-tower builds needing compact ARGB cooling
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700/1851/1150/1151/1200
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Tower Design
- Single-Tower
- Fan Size
- 120mm
This single-tower CPU air cooler features five 6mm copper heat pipes and a white finish with addressable RGB lighting. Its compact 148mm height fits easily into medium-sized computer cases where taller coolers cannot clear the side panel. The included 120mm PWM fan pushes up to 66.17 CFM of airflow while keeping noise at or below 25.6 dB(A). It suits you if you need reliable cooling in a compact white chassis.
Pros
- Five 6mm copper heat pipes with AGHP technology
- Compact 148mm height fits medium-sized PC cases
- 120mm PWM fan delivers up to 66.17 CFM airflow
- Low specified noise level at or below 25.6 dB(A)
- Broad socket support including Intel LGA 1851 and AMD AM5
Cons
- Single-tower design includes only one 120mm fan
- Fan bearing rated for 20,000 hours of service life
Good fit if
- You need a white CPU cooler with ARGB lighting for a mid-sized case.
- You want a tower cooler with a maximum height clearance under 150mm.
- You use modern Intel LGA 1700/1851 or AMD AM4/AM5 motherboard sockets.
Skip if
- You require a dual-tower or dual-fan cooling setup.
- You are building an all-black PC build without white components.
Verdict: Thermalright Assassin King 120 White ARGB offers a compact 148mm profile with five heat pipes and addressable lighting. It delivers dependable cooling for modern Intel and AMD processors without crowding your case.
Thermalright Assassin King 120 SE White ARGB
Best for: compact white mid-tower PC builds
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1200, 17XX
- Cooler Height
- 148mm
- Heat Pipes
- 5
- Fan Size
- 120mm
- Fan Speed
- 1550 RPM ± 10%
View on Amazon: Thermalright Assassin King 120 SE White ARGB
The Thermalright Assassin King 120 SE White ARGB is a single-tower CPU air cooler built for mid-sized cases. It features five 6mm heat pipes paired with an aluminum heatsink standing 148mm tall. A 120mm PWM fan delivers up to 66.17 CFM of airflow at noise levels up to 25.6 dB(A). If you need ARGB lighting and dependable cooling for mainstream AMD or Intel sockets, this compact white cooler fits your build.
Pros
- Five 6mm heat pipes with AGHP III technology
- Compact 148mm height fits mid-sized cases
- Delivers up to 66.17 CFM of airflow
- Low noise profile rated at 25.6 dB(A) maximum
Cons
- Single-fan configuration rather than dual-fan setup
- Maximum fan speed tops out at 1550 RPM
Good fit if
- You need a cooler under 150mm tall to fit a mid-sized chassis.
- You want a white heatsink and fan with ARGB lighting.
- You run standard Intel LGA 1700/1200/115X or AMD AM4/AM5 sockets.
Skip if
- You require a dual-tower or dual-fan configuration.
- You use unlisted sockets such as AMD TR4 or Intel LGA 2066.
Verdict: Thermalright Assassin King 120 SE White ARGB provides solid single-tower cooling with five heat pipes and a clearance-friendly 148mm profile. It is a dependable choice for mid-sized systems that require quiet operation and integrated ARGB lighting.
Thermalright Peerless Assassin 120 Dual-Tower White ARGB
Best for: white mid-tower builds needing dual-fan airflow
- Lighting
- ARGB (what this guide is about)
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851
- Cooler Height
- 157mm
- Heat Pipes
- 6
- Tower Design
- Dual-Tower
- Fan Size
- 120mm
View on Amazon: Thermalright Peerless Assassin 120 Dual-Tower White ARGB
This dual-tower air cooler pairs six 6mm copper heat pipes with two 120mm PWM ARGB fans. It features an offset fin stack measuring 157mm tall and provides up to 66.17 CFM of airflow at 25.6 dB(A). The pure copper base and 9,600 square centimeter dissipation area handle heavy thermal output. It suits you if you need balanced, high-volume dual-fan cooling with addressable lighting in an all-white mid-tower build.
Pros
- Dual 120mm PWM fans deliver up to 66.17 CFM airflow
- Six 6mm AGHP copper heat pipes with a pure copper base
- 9,600 cm² heat dissipation area across twin aluminum towers
- Maximum rated fan operating noise level of 25.6 dB(A)
Cons
- Height of 157mm prevents installation in compact small-form-factor cases
- Width of 135mm can overhang tall RAM modules despite the offset base
Good fit if
- You have at least 157mm of CPU cooler clearance in your chassis.
- You need dual ARGB fans that sync with 4-pin motherboard headers.
- You are running modern Intel LGA 1700/1851 or AMD AM4/AM5 sockets.
Skip if
- You are assembling a slim or low-profile computer build.
- You require a narrow single-tower design to showcase tall memory modules.
Verdict: Thermalright Peerless Assassin 120 Dual-Tower White ARGB delivers high heat dissipation area alongside dual synchronized lighting fans. Its six copper heat pipes and wide fin array make it a capable cooling solution for standard tower enclosures.
Specifications side by side
| Spec | Thermalright Assassin X 120 ARGB CPU Cooler | Thermalright Peerless Assassin 120 SE White ARGB | Thermalright Peerless Assassin 120 White ARGB | Thermalright Peerless Assassin 120 White ARGB Cooler | Thermalright Assassin X 120 ARGB Cooler | Thermalright Burst Assassin 120 ARGB | Thermalright Peerless Assassin 120 SE White ARGB | Thermalright Assassin King 120 SE White ARGB | Thermalright 67mm Low-Profile White ARGB Cooler | Thermalright AXP120-X67 White ARGB Cooler | Thermalright 67mm Low Profile White ARGB Cooler | Thermalright Assassin King 120 SE ARGB | Thermalright Assassin King 120 White ARGB | Thermalright Assassin King 120 SE White ARGB | Thermalright Peerless Assassin 120 Dual-Tower White ARGB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Socket Compatibility | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA1700, 115X, 1851, 1200 | not specified | not specified | not specified | AM4, AM5, LGA1700/1851/1150/1151/1200 | Intel 115X/1200/1700/1851, AMD AM4/AM5 | AM4, AM5, LGA 1700, 1851, 1200, 115X | not specified | not specified | not specified | AM4, AM5, LGA 1700, 1200, 1150, 1151 | AM4, AM5, LGA1700/1851/1150/1151/1200 | AM4, AM5, LGA1700, 115X, 1200, 17XX | AM4, AM5, LGA1700, LGA1851 |
| Cooler Height | 148 mm | 155mm | 157 mm | 155 mm | 148 mm | 154 mm | 155 mm | 148mm | 67mm | 67mm | 67mm | 148mm | 148mm | 148mm | 157mm |
| Heat Pipes | 4 | 6 | 6 | 6 | 4 | 6 | 6 | 5 | 6 | 6 | 6 | 5 | 5 | 5 | 6 |
| Tower Design | not specified | Double tower | Dual-Tower | Dual-Tower | Single-Tower | Single-Tower | Dual-Tower | not specified | Low-Profile | Low-Profile | Low-Profile | not specified | Single-Tower | not specified | Dual-Tower |
| Fan Size | 120 mm | 120mm | 120 mm | 120 mm | 120 mm | 120 mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm | 120mm |
| TDP Rating | 125 to 225 W | 120 to 265W | 245 W | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Fan Speed | 1550 RPM | 1550rpm±10% | 1500 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1550 RPM | 1800 RPM | 1800 RPM | 1800 RPM | 1550 RPM | 1550rpm±10% | 1550 RPM ± 10% | 1500 RPM ± 10% |
| Lighting | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
| Color | AX120 R SE ARGB | White | White | White | AX120R SE ARGB | BA120 ARGB | White | White | White | White | White | not specified | White | White | White |
| Material | Aluminum | not specified | Aluminum | Aluminum | not specified | not specified | Aluminum | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Aluminum |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan | Fan | not specified | Fan | Fan | Fan | Fan |
| Dimensions | 5.83 × 4.92 × 2.8 inches | 4.72 × 0.98 × 4.72 inches | 6.18 × 5.31 × 4.92 inches | 4.92 × 5.31 × 6.1 inches | 4.92 × 2.8 × 5.83 inches | 4.9 × 2 × 6 inches | 6.1 × 5.31 × 4.92 inches | 5.83 × 4.92 × 2.87 inches | 4.86 × 4.72 × 2.6 inches | 4.86 × 4.72 × 2.64 inches | 4.86 × 4.72 × 2.64 inches | 4.72 × 2.87 × 5.83 inches | 4.92 × 2.87 × 5.83 inches | 0.98 × 4.72 × 4.72 inches | 4.9 × 5.3 × 6.18 inches |
| Weight | 1.39 pounds | 2 pounds | 2 pounds | 1.87 pounds | 1.39 pounds | 1.12 pounds | 1.87 pounds | 1.4 pounds | 1.34 pounds | 1.34 pounds | 1.34 pounds | 1.15 pounds | 1.4 pounds | 1 pounds | 1 pounds |
| Size | 4 Heat pies | 6 Heat Pipe | not specified | PA120 SE series | 4 Heatpies | 4 Heatpies | 6 Heatpipes | 5 Heat pies | 67mm | AXP120 series | 67mm | AK120 SE ARGB | 5 Heatpies | AK120 SE WHITE ARGB | 6 Heatpipes |
| Model | AX120 Refined SE ARGB | PA120 SE WHITE ARGB 1700-D2 | PA120 White ARGB-D2 | not specified | not specified | BA120 ARGB-D1 | PA120 SE WHITE ARGB 1700-d6 | AK120 SE WHITE ARGB-d2 | not specified | AXP120-X67 WHITE ARGB 1700-d2 | not specified | AK120 SE ARGB-d6 | AK120 SE WHITE ARGB-d1 | AK120 SE WHITE ARGB-D6-2 | not specified |
How to Choose a Thermalright ARGB Cooler
-
Count the Heat Pipes
Heat pipes pull thermal energy from the baseplate directly into the aluminum fins. These Thermalright coolers offer four, five, or six heat pipes. Four pipes handle everyday computing and lighter thermal demands without excess bulk. Stepping up to five pipes gives you extra dissipation headroom for demanding tasks. For demanding high-heat processors, choose a six-pipe design like the Thermalright Burst Assassin 120 ARGB. Always verify the heat pipe count in the specifications to balance cooling performance against the physical footprint inside your case.
-
Select Your Tower Design
Choose between single-tower and dual-tower layouts based on your cooling priorities and motherboard clearance. Single-tower heatsinks keep a slim profile that avoids crowding your motherboard headers and system memory slots. Dual-tower configurations add a second fin array and an extra fan to maximize total dissipation surface. The Thermalright Peerless Assassin 120 SE White ARGB uses a dual-tower layout to dissipate high heat loads. If you need maximum airflow across more fin area, pick a dual-tower model over a compact single tower.
-
Measure Vertical Cooler Clearance
Check your computer case specifications for maximum CPU cooler clearance before buying. Standard tower models in this lineup range from 148 mm up to 155 mm tall. A 148 mm design like the Thermalright Assassin X 120 ARGB CPU Cooler fits easily into most standard mid-tower chassis. Taller dual-tower models require more depth between the motherboard and your side panel. If your case is compact or narrow, measure this vertical distance carefully. Comparing cooler height against chassis clearance prevents clearance conflicts during installation.
-
Check the TDP Rating
Review the Thermal Design Power rating to make sure the cooler can handle your processor. Listed Thermalright models publish specific limits, such as 225W, 245W, or 265W TDP. The Thermalright Peerless Assassin 120 White ARGB specifies a 245W TDP rating to manage high-power CPUs. Match this specification against your processor wattage specifications under sustained operation. Selecting a cooler with a TDP rating higher than your processor ensures that the heatsink and fans can maintain stable temperatures during intensive computing tasks.
-
Evaluate Low-Profile Options
Determine whether your PC enclosure requires a horizontal low-profile layout instead of an upright tower. Standard desktop enclosures fit upright towers, but small-form-factor cases often have severe vertical limits. The Thermalright 67mm Low-Profile White ARGB Cooler uses a 67 mm total height profile and a slim 15 mm ARGB fan to fit tight spaces while retaining six heat pipes. If you are building inside a slim or compact chassis, choose a dedicated 67 mm model to guarantee proper side-panel closure.
-
Match the Build Color
Pick a heatsink finish that matches your PC build theme and internal components. Thermalright provides several options in dedicated all-white coatings alongside standard aluminum finishes. The Thermalright Assassin King 120 SE White ARGB features a white finish across its structure to complement light-colored PC components, motherboards, and case interiors. Addressable RGB illumination illuminates the fan blades on all these models, but selecting the matching frame color ensures consistent visual styling across your entire desktop setup.
Frequently asked questions
How tall are low-profile Thermalright ARGB coolers for small form factor cases?
The low-profile models measure 67 mm in total height. For example, the Thermalright 67mm Low-Profile White ARGB Cooler uses a 15mm slim fan and six heat pipes to fit inside tight chassis layouts. This design gives you standard heatsink performance while maintaining strict clearance limits in small-form-factor desktop enclosures.
What is the maximum TDP rating among these Thermalright dual-tower ARGB coolers?
The highest listed cooling capacity is 265W TDP on the Thermalright Peerless Assassin 120 SE White ARGB. Dual-tower models in this lineup, such as the Peerless Assassin 120 White ARGB, also provide 245W TDP ratings. Both units use six heat pipes and dual 120mm fans to dissipate high heat loads from demanding desktop processors.
How loud are the fans on Thermalright Peerless Assassin ARGB coolers?
The published sound output for the Thermalright Peerless Assassin 120 SE White ARGB reaches at or below 25.6 dB(A). Dual PWM fans regulate rotational speed based on system heat to maintain this low noise threshold. This acoustic rating allows you to run high-load dual-tower cooling while preserving quiet operation inside your computer case.
Can you get a single-tower Thermalright ARGB cooler with six heat pipes?
Yes, the Thermalright Burst Assassin 120 ARGB combines a single-tower heatsink with six heat pipes. This cooler stands 154mm tall and utilizes an addressable RGB fan for illumination. It offers the heat pipe count of larger dual-tower units while maintaining single-tower clearance around your motherboard memory slots and headers.
What is the height difference between standard single-tower and dual-tower models?
Single-tower options like the Thermalright Assassin King 120 SE White ARGB stand at 148mm, while dual-tower units reach up to 155mm. For example, the Peerless Assassin 120 SE White ARGB utilizes that 155mm vertical footprint to fit its twin fin stacks. Checking your PC case width ensures the side panel closes without touching the cooler.
Which Thermalright ARGB coolers feature five heat pipes?
The Assassin King models feature five heat pipes within a single-tower layout. Coolers such as the Thermalright Assassin King 120 SE ARGB and Assassin King 120 White ARGB use this five-pipe configuration paired with a 148mm height profile. This middle tier provides an alternative between four-pipe entry models and six-pipe performance coolers.
How do ARGB lighting connections work on Thermalright coolers?
Thermalright ARGB coolers feature addressable RGB fans that connect to compatible motherboard headers for software-managed lighting. As noted on models like the Peerless Assassin 120 White ARGB, the lighting synchronizes through standard motherboard controls. This setup allows you to coordinate color schemes, patterns, and dynamic effects with other illuminated components across your entire build.