As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Best Heatsinks for Laptop: 15 Spec-Based Picks

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

You need the best heatsinks for laptop components to maintain stable temperatures in tight spaces. We compared 15 options strictly by their published specifications to help you choose the right thermal solution. The top pick is the JIUWU 15x15x0.8mm Copper Heatsink Shims, which leads because its precise 0.8mm thickness effectively bridges small gaps between laptop CPUs and GPUs. These picks are based entirely on the specs listed on the product pages. This guide helps you decide which copper shims, thermal putty, or M.2 coolers fit your specific clearance and hardware needs.

Quick picks

#ProductBest forPrice
1 JIUWU 15x15x0.8mm Copper Heatsink Shims Best overall laptop CPU and GPU 0.8mm gap replacement Check price of JIUWU 15x15x0.8mm Copper Heatsink Shims on Amazon
2 Uxcell 20mm Pure Copper Thermal Shim Also great tight laptop GPU/CPU gap filling Check price of Uxcell 20mm Pure Copper Thermal Shim on Amazon
3 K5 PRO 400g Viscous Thermal Putty Best premium replacing uneven laptop thermal pads Check price of K5 PRO 400g Viscous Thermal Putty on Amazon
4 Easycargo 15x15x0.5mm Copper Shims 20-Pack Best budget low-clearance laptop VRAM and chipset cooling Check price of Easycargo 15x15x0.5mm Copper Shims 20-Pack on Amazon
5 Easycargo 100-Piece 15mm Copper Shim Kit Also great variable-thickness laptop component gap filling Check price of Easycargo 100-Piece 15mm Copper Shim Kit on Amazon
6 Easycargo SODIMM Copper Memory Heatsink Also great low-profile laptop SODIMM memory cooling Check price of Easycargo SODIMM Copper Memory Heatsink on Amazon
7 SGTKJSJS Copper M.2 2280 Laptop Heatsink laptop M.2 2280 SSDs in tight slots Check price of SGTKJSJS Copper M.2 2280 Laptop Heatsink on Amazon
8 Easycargo Laptop M.2 2280 Copper Heatsink low-clearance laptop M.2 2280 SSD cooling Check price of Easycargo Laptop M.2 2280 Copper Heatsink on Amazon
9 Icepc Graphene Copper M.2 Heatsink Slim laptop M.2 NVMe SSD cooling Check price of Icepc Graphene Copper M.2 Heatsink on Amazon
10 Icepc 1.5mm Graphene Copper M.2 Heatsink tight-clearance 2280 NVMe SSD laptop slots Check price of Icepc 1.5mm Graphene Copper M.2 Heatsink on Amazon
11 GeeekPi 102-Piece Aluminum and Copper Heatsink Kit Best raspberry pi cooling assorted laptop VRM and memory chips Check price of GeeekPi 102-Piece Aluminum and Copper Heatsink Kit on Amazon
12 Bopaodao 120mm Flat Copper Heat Pipe custom laptop thermal routing in tight spaces Check price of Bopaodao 120mm Flat Copper Heat Pipe on Amazon
13 Bopaodao 5mm x 90mm Copper Heat Pipe Custom passive laptop heat pipe routing Check price of Bopaodao 5mm x 90mm Copper Heat Pipe on Amazon
14 Icepc 2280 M.2 Graphene Coated Copper Heatsink laptop 2280 M.2 drives with vertical clearance Check price of Icepc 2280 M.2 Graphene Coated Copper Heatsink on Amazon
15 JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink Slim laptop M.2 2280 SSD cooling Check price of JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink on Amazon

The best fit for you

Our 15 picks

Best overall

JIUWU 15x15x0.8mm Copper Heatsink Shims

Best for: laptop CPU and GPU 0.8mm gap replacement

Compatible Device
GPU, Laptop (what this guide is about)
Material
High Purity Copper
Dimensions
15mm x 15mm x 0.8mm
Length
0.59 inches
Width
0.59 inches
Weight
0.32 ounces

View on Amazon: JIUWU 15x15x0.8mm Copper Heatsink Shims Affiliate link

These JIUWU thermal shims provide direct heat transfer for your laptop CPU and GPU. Each piece in this 20-pack measures 15mm by 15mm with a 0.8mm thickness, constructed entirely from copper. You get a set suited for filling specific low-clearance component gaps across portable computer logic boards, complete with an included internal USB splitter and labels for installation.

Pros

  • Pure copper construction for CPU and GPU heat dissipation
  • Precise 15mm x 15mm footprint with 0.8mm thickness
  • Includes 20 identical pads per pack
  • Comes with an internal USB splitter and labels

Cons

  • Fixed 0.8mm thickness offers no size variety
  • No pre-applied thermal adhesive specified

Good fit if

  • You need uniform 0.8mm thick copper shims for a laptop processor or graphics chip.
  • You require multiple identical 15mm x 15mm pads for repeated repairs.

Skip if

  • You need an assortment of different shim thicknesses for uneven component gaps.
  • You require heatsink pads with pre-applied adhesive tape.

Verdict: JIUWU 15x15x0.8mm Copper Heatsink Pads deliver uniform copper shims designed for laptop CPU and GPU thermal gaps. The 20-piece pack gives you multiple identical 0.8mm plates for repeated hardware maintenance.

Also great

Uxcell 20mm Pure Copper Thermal Shim

Best for: tight laptop GPU/CPU gap filling

Compatible Device
GPU, Laptop (what this guide is about)
Material
Pure Copper
Dimensions
0.79 x 0.79 x 0.04 inches
Mounting Type
Thermal Shim Pad
Length
0.79 inches
Width
0.79 inches

View on Amazon: Uxcell 20mm Pure Copper Thermal Shim Affiliate link

This is a pure copper heatsink shim designed for laptops and GPUs. It measures 20 x 20 x 1.0mm, offering a compact profile for tight spaces. The material provides high thermal conductivity to lower CPU temperatures. You get five pieces per package. This kit suits you if you need gap fillers for development boards or cooling components where space is limited.

Pros

  • Made from pure copper for efficient heat dissipation
  • Compact 20 x 20 x 1.0mm dimensions fit small spaces
  • High thermal conductivity helps reduce CPU temperatures
  • Package includes 5 pieces for multiple devices

Cons

  • 1.0mm thickness may be too thick for very tight gaps
  • Limited to 20x20mm size, not suitable for larger chips
  • No adhesive or thermal pads included in the package

Good fit if

  • You need pure copper shims for laptop GPU or CPU cooling
  • You require compact 20x20mm pads for development boards
  • You need multiple shims for various cooling gaps

Skip if

  • You require pre-applied thermal adhesive for easy installation
  • You need larger heatsinks for high-power components
  • You prefer aluminum over copper for weight savings

Verdict: Uxcell 20x20x1.0mm Pure Copper Heatsink is a solid choice for users needing small, high-conductivity copper shims for laptops and GPUs. It fits best in tight spaces where standard heatsinks cannot fit.

Best premium

K5 PRO 400g Viscous Thermal Putty

Best for: replacing uneven laptop thermal pads

Compatible Device
Laptop (what this guide is about)
Features
Thermal Pad
Dimensions
1.97 × 3.15 × 3.15 inches
Weight
14.1 ounces

View on Amazon: K5 PRO 400g Viscous Thermal Putty Affiliate link

This 400g tub of viscous thermal putty replaces traditional laptop thermal pads on memory chips and secondary components. It provides thermal conductivity exceeding 5.3 W/m.K and fills component gaps up to 3mm, with optimal performance at gaps up to 1mm. It does not conduct electricity and operates across temperatures from -90 to 250 degrees Celsius. You will find it suitable for laptop maintenance requiring custom gap filling without precut pad sizing.

Pros

  • Thermal conductivity rating over 5.3 W/m.K
  • Fills component gaps from 1mm up to 3mm
  • Operating temperature range of -90 to 250 degrees Celsius
  • Electrically non-conductive formulation

Cons

  • Putty format requires manual application unlike pre-cut pads
  • Does not include solid copper shims or metal heatsinks

Good fit if

  • You need to bridge uneven component gaps up to 3mm on laptop memory chips.
  • You want an electrically non-conductive replacement for soft stock thermal pads.

Skip if

  • You need a rigid copper heatsink or solid metal shim plate.
  • You prefer peel-and-stick pre-cut thermal pads for standardized sizing.

Verdict: K5 PRO 400g Viscous Thermal Putty replaces factory laptop thermal pads with high-conductivity, non-conductive paste capable of bridging gaps up to 3mm. It delivers broad operating temperature tolerance for hardware requiring custom thermal gap coverage.

Best budget

Easycargo 15x15x0.5mm Copper Shims 20-Pack

Best for: low-clearance laptop VRAM and chipset cooling

Compatible Device
GPU, Laptop, RAM (what this guide is about)
Material
Copper
Cooling Method
passive
Dimensions
15x15x0.5mm
Mounting Type
Pre applied adhesive tape backing
Features
Thermal Tape

View on Amazon: Easycargo 15x15x0.5mm Copper Shims 20-Pack Affiliate link

The Easycargo 15x15x0.5mm Copper Shims offer a passive cooling setup for your laptop CPU, GPU, VRAM, and IC chips. Each piece in this 20-pack features a 15 by 15 millimeter footprint and a 0.5-millimeter thickness for low-clearance areas. The pre-applied 3M 8810 thermal conductive adhesive tape holds the copper pads firmly in position, making them an ideal choice if you require simple mounting across several small components.

Pros

  • Copper construction for passive thermal transfer
  • Pre-applied 3M 8810 thermal conductive adhesive tape
  • Includes 20 individual shims in one package
  • Slim 0.5mm thickness fits tight component clearances

Cons

  • Single 0.5mm thickness provides no size variety
  • Adhesive backing is pre-applied and cannot be omitted

Good fit if

  • You need uniform 15 x 15 x 0.5mm copper shims for laptop chips.
  • You prefer pre-applied 3M 8810 adhesive tape for mounting.
  • You want 20 shims to cover multiple motherboard components.

Skip if

  • You require multiple shim thicknesses to bridge varying gap sizes.
  • You plan to use standalone thermal paste instead of adhesive tape.

Verdict: Easycargo 15x15x0.5mm Copper Shims provide 20 copper pads with pre-applied 3M 8810 adhesive for direct heat dissipation. They are a reliable choice if you need fixed 0.5mm spacing for laptop ICs and VRAM.

Also great

Easycargo 100-Piece 15mm Copper Shim Kit

Best for: variable-thickness laptop component gap filling

Compatible Device
GPU, Laptop, RAM, PS5, M.2 SSD, VRM (what this guide is about)
Material
Copper C1100
Length
0.6 inches
Width
0.6 inches

View on Amazon: Easycargo 100-Piece 15mm Copper Shim Kit Affiliate link

This kit includes 100 pure C1100 copper shims sized at 15mm by 15mm. You get 12 distinct thicknesses ranging from 0.1mm up to 2mm, providing precise gap-filling options for components like laptop GPUs, VRAM, and M.2 SSDs. Each shim offers a rated thermal conductivity of 401W/mK. It suits you if your laptop thermal assembly requires exact metal spacing to bridge uneven gaps across internal processors and heatsinks.

Pros

  • Includes 100 copper shims across 12 distinct thicknesses from 0.1mm to 2mm
  • Pure C1100 copper construction with 401W/mK thermal conductivity
  • Compact 15mm by 15mm footprint fits laptop GPUs, RAM, and VRMs
  • Available in styles with or without adhesive

Cons

  • Fixed 15mm by 15mm size does not match non-square components
  • Thickest 2mm option includes only 3 pieces

Good fit if

  • You need multiple thickness choices from 0.1mm to 2mm to bridge laptop component gaps.
  • You want C1100 copper plates rated for 401W/mK thermal conductivity.

Skip if

  • You need heatsink plates larger than 15mm by 15mm.
  • You require more than 3 pieces of the 2mm thickness.

Verdict: Easycargo 100-Piece 15mm Copper Shim Kit delivers 401W/mK thermal conductivity across 12 distinct thicknesses for custom laptop gap management. It provides a comprehensive assortment of C1100 copper spacers for tight internal clearances.

Also great

Easycargo SODIMM Copper Memory Heatsink

Best for: low-profile laptop SODIMM memory cooling

Compatible Device
Laptop, RAM (what this guide is about)
Material
Copper
Dimensions
63mmx23mmx0.5mm
Mounting Type
Pre-applied adhesive tape
Features
Thermal Tape
Length
2.48 inches

View on Amazon: Easycargo SODIMM Copper Memory Heatsink Affiliate link

The Easycargo Copper SODIMM RAM Heatsink is a dedicated metal heat spreader designed for notebook memory modules. Measuring 63 mm by 23 mm with an ultra-thin 0.5 mm profile, it fits standard laptop SODIMM layouts without taking up excess clearance. It uses copper for heat transfer and includes pre-applied 3M 8810 thermal conductive adhesive tape. You will appreciate this unit if you need low-profile cooling on compact laptop RAM sticks.

Pros

  • Low 0.5 mm thickness fits tight laptop clearances
  • Pre-applied 3M 8810 thermal conductive adhesive tape
  • Sized specifically for standard SODIMM memory modules at 63 mm by 23 mm
  • Lightweight copper construction at 5 grams per piece

Cons

  • Thin 0.5 mm flat plate lacks raised cooling fins
  • Dimensions tailored to SODIMM RAM rather than M.2 drives

Good fit if

  • You need a low-profile heatsink specifically shaped for SODIMM laptop RAM.
  • You have minimal vertical clearance of only 0.5 mm above your memory stick.
  • You want pre-applied 3M 8810 thermal conductive tape for direct mounting.

Skip if

  • You need cooling for an M.2 SSD or a laptop processor instead of RAM.
  • You require a thicker heatsink with elevated fins for heat dissipation.

Verdict: Easycargo Copper SODIMM RAM Heatsink delivers a slim 0.5 mm copper cooling solution fitted precisely for laptop memory sticks. Its pre-applied thermal adhesive enables direct installation in tight enclosures.

SGTKJSJS Copper M.2 2280 Laptop Heatsink

Best for: laptop M.2 2280 SSDs in tight slots

Compatible Device
Laptop, M.2 SSD (what this guide is about)
Material
100% copper
Mounting Type
Rubber ring, insulation sticker
Features
Thermal Pad
Length
3 inches
Width
0.87 inches

View on Amazon: SGTKJSJS Copper M.2 2280 Laptop Heatsink Affiliate link

This SGTKJSJS heatsink kit includes two 100% copper coolers sized at 3 by 0.87 inches for M.2 2280 solid-state drives. Built with a slim 0.04-inch profile, each plate requires only 1.5 millimeters of installation clearance inside your laptop chassis. You receive 0.5-millimeter and 1-millimeter silicone thermal pads alongside rubber rings and high-temperature insulation stickers. It suits you if you need low-profile copper cooling for tight drive bays.

Pros

  • Made of 100% cut and polished copper
  • Requires 1.5 mm minimum installation clearance
  • Includes both 0.5 mm and 1 mm silicone thermal pads
  • Provides rubber rings and high-temperature insulation stickers for mounting
  • Comes with two heatsink plates in the package

Cons

  • Designed strictly for 2280 form-factor M.2 drives
  • Securing relies on rubber rings or adhesive stickers rather than metal screws or clips

Good fit if

  • You have an M.2 2280 solid-state drive in a laptop with at least 1.5 mm of clearance.
  • You need two heatsinks for multiple drives or spare hardware.
  • You want multiple thermal pad thickness options to handle uneven drive surfaces.

Skip if

  • You use smaller M.2 form factors such as 2230 or 2242.
  • You prefer rigid screw-mounted or metal-bracket heatsink hardware.

Verdict: SGTKJSJS Copper M.2 2280 Laptop Heatsink delivers ultra-slim copper heat dissipation with flexible mounting options for tight notebook drive slots. It provides necessary thermal pads and dual plates for standard 2280 NVMe upgrades.

Easycargo Laptop M.2 2280 Copper Heatsink

Best for: low-clearance laptop M.2 2280 SSD cooling

Compatible Device
Laptop (what this guide is about)
Material
Copper
Dimensions
77mmx22mmx1mm
Mounting Type
Nano thermal tape
Features
Thermal Pad
Length
3.03 inches

View on Amazon: Easycargo Laptop M.2 2280 Copper Heatsink Affiliate link

This Easycargo copper heatsink kit cools laptop M.2 2280 solid-state drives. It measures 77mm by 22mm with a slim 1mm profile, fitting tight internal drive bays. Pure copper construction delivers a rated thermal conductivity of 401 W/mK. It includes pre-sized nano thermal pads to transfer heat directly from your drive. Choose this if you need a low-clearance cooling solution for an internal laptop SSD.

Pros

  • Pure copper material with 401 W/mK thermal conductivity rating
  • Slim 1mm thickness designed for low-clearance laptop bays
  • Includes bundled nano thermal pads for heat transfer
  • Sized for 77mm by 22mm M.2 2280 drives

Cons

  • Fixed 77mm length does not fit shorter M.2 drive formats
  • Flat slab profile lacks raised heat-dissipation fins

Good fit if

  • You need a slim 1mm copper heatsink for a laptop M.2 2280 SSD.
  • You want nano thermal padding included in the package.

Skip if

  • You use a 2230, 2242, or 2260 form-factor solid-state drive.
  • You have clearance for a taller heatsink with cooling fins.

Verdict: Easycargo Copper Laptop M.2 2280 Heatsink provides 401 W/mK thermal conductivity in a compact 1mm profile. It is a practical choice when laptop drive bay clearance is minimal.

Icepc Graphene Copper M.2 Heatsink

Best for: Slim laptop M.2 NVMe SSD cooling

Compatible Device
Laptop, PS5 (what this guide is about)
Material
Copper with Graphene Coating
Dimensions
70x20x2mm
Mounting Type
Silicone Thermal Pad
Weight
0.71 ounces

View on Amazon: Icepc Graphene Copper M.2 Heatsink Affiliate link

This is a 70 by 20 millimeter copper heatsink with a graphene coating for M.2 NVMe SSDs. It measures 2 millimeters in height and weighs 0.71 ounces. The design includes a pre-applied silicone thermal pad for secure installation without tools. It suits laptops and PS5 consoles where space is tight. The graphene layer claims high thermal conductivity to help dissipate heat from your drive efficiently.

Pros

  • Graphene coating on pure copper for efficient heat transfer
  • Slim 2mm height fits narrow laptop spaces
  • Includes pre-applied silicone thermal pad for easy mounting
  • Compatible with 2280 size M.2 NVMe SSDs

Cons

  • Only covers the top surface of the SSD
  • Fixed 2mm height may not fit thicker drives
  • Does not include additional thermal pads for replacement

Good fit if

  • You need a low-profile cooler for a laptop M.2 slot
  • You want a graphene-coated copper heatsink for better conductivity
  • You prefer a tool-free installation with pre-applied adhesive

Skip if

  • You require a heatsink that covers both sides of the SSD
  • Your drive requires a height greater than 2mm
  • You need a heatsink for standard desktop PC cases

Verdict: icepc 70mm Graphene Copper Heatsink is a slim, tool-free solution for cooling 2280 NVMe drives in laptops and PS5 consoles. It fits buyers who need a low-profile, graphene-enhanced copper sink that mounts easily with its included thermal pad.

Icepc 1.5mm Graphene Copper M.2 Heatsink

Best for: tight-clearance 2280 NVMe SSD laptop slots

Compatible Device
Laptop, PS5 (what this guide is about)
Material
Copper with graphene coating
Dimensions
70x20x1.5mm
Mounting Type
Adhesive thermal pad
Weight
1.59 ounces

View on Amazon: Icepc 1.5mm Graphene Copper M.2 Heatsink Affiliate link

The Icepc 1.5mm Graphene Copper M.2 Heatsink cools 2280 NVMe drives inside slim laptop bays. It measures 70 x 20 x 1.5 mm, pairing a pure copper plate with a high-conductivity graphene coating. Built-in slanted slots expand surface area for chassis airflow. You attach it using the included adhesive thermal pad without extra mounting hardware. This heatsink fits tight clearance builds where thicker aftermarket coolers cannot clear laptop bottom panels.

Pros

  • Slim 1.5mm profile fits tight laptop clearances
  • Pure copper core with graphene coating
  • Integrated slanted slot design for air exchange
  • Tool-free installation with adhesive thermal pad

Cons

  • Measures 70mm long, leaving ends of 80mm SSDs uncovered
  • Uses adhesive mounting rather than structural clips or screws
  • Protective backing film requires manual removal prior to use

Good fit if

  • You have minimal vertical clearance inside your laptop chassis
  • You use a standard 2280 format M.2 NVMe solid-state drive
  • You prefer adhesive tool-free installation

Skip if

  • You need cooling for shorter 2230 or 2242 M.2 drives
  • You prefer mechanical screw or clip retention

Verdict: Icepc 1.5mm Graphene Copper M.2 Heatsink delivers ultra-thin thermal transfer for laptop 2280 SSD slots with tight clearance constraints. Its graphene-coated copper plate and adhesive pad offer simple, low-profile heat dissipation.

Best raspberry pi

GeeekPi 102-Piece Aluminum and Copper Heatsink Kit

Best for: cooling assorted laptop VRM and memory chips

Compatible Device
GPU, Laptop, RAM, VRM, Raspberry Pi (what this guide is about)
Material
Aluminum, Copper
Mounting Type
Thermal conductive adhesive tape
Dimensions
1.57 × 1.57 × 0.43 inches
Weight
7.83 ounces

View on Amazon: GeeekPi 102-Piece Aluminum and Copper Heatsink Kit Affiliate link

The GeeekPi 102-Piece Aluminum and Copper Heatsink Kit supplies a wide assortment of miniature cooling blocks for your laptop internals. You get 92 aluminum heatsinks and 10 copper heatsinks split across 17 categories inside an organized storage box. Every heatsink includes thermal conductive adhesive tape for direct mounting on VRM chips, VRAM, and small ICs. This kit suits you if you need multiple heatsink dimensions to cover different surface heights inside your laptop.

Pros

  • Includes 102 heatsinks across 17 distinct categories
  • Contains 92 aluminum and 10 copper heatsinks
  • Pre-applied thermal conductive adhesive tape on pieces
  • Includes dedicated storage box to keep parts separated

Cons

  • Contains significantly fewer copper pieces than aluminum pieces
  • Lacks dedicated full-coverage M.2 SSD mounting brackets

Good fit if

  • You need small heatsinks in varying sizes for laptop VRM, VRAM, or small IC components.
  • You want thermal adhesive tape already attached to each heatsink.
  • You want an organized multi-compartment storage box with assorted heatsink sizes.

Skip if

  • You need a dedicated full-length M.2 2280 NVMe SSD heatsink.
  • You require an all-copper setup rather than mostly aluminum heatsinks.

Verdict: GeeekPi 102-Piece Aluminum and Copper Heatsink Kit provides extensive sizing options for cooling small laptop components with pre-applied thermal tape. It delivers versatile coverage for tight spaces, though copper options are limited.

Bopaodao 120mm Flat Copper Heat Pipe

Best for: custom laptop thermal routing in tight spaces

Compatible Device
GPU, Laptop, RAM (what this guide is about)
Material
99% pure copper
Cooling Method
Passive
Dimensions
2mm x 5.5mm x 120mm

View on Amazon: Bopaodao 120mm Flat Copper Heat Pipe Affiliate link

The Bopaodao 120mm Flat Copper Heat Pipe is a passive thermal component designed for laptop, GPU, and RAM cooling. Made from 99% pure copper, this single pipe measures 120mm long, 5.5mm wide, and 2mm thick to move heat away from tight spaces. It suits you if you need to build or modify a custom laptop thermal setup and require a flat, slim profile that fits inside compact notebook enclosures.

Pros

  • Constructed from 99% pure copper for passive heat dissipation
  • Slim 2mm thickness and 5.5mm width fit compact internal clearances
  • 120mm length bridges heat transfer between chips and radiators
  • Listed for laptop CPU, GPU, and RAM thermal applications

Cons

  • Includes only 1 heat pipe in the package
  • Dimensions carry a ±0.2mm thickness and ±0.5mm length deviation
  • Includes no thermal adhesive, thermal pads, or mounting brackets

Good fit if

  • You need a flat 2mm-thick copper conduit for custom laptop cooling.
  • You are routing heat away from laptop CPU, GPU, or RAM components.

Skip if

  • You need an all-in-one heatsink kit that includes thermal pads.
  • You require zero-tolerance dimensions without the listed ±0.5mm variance.

Verdict: Bopaodao 120mm Flat Copper Heat Pipe provides a slim 99% pure copper conduit for DIY laptop thermal repairs and modifications. Its flat 2mm profile makes it practical for routing heat away from cramped internal hardware.

Bopaodao 5mm x 90mm Copper Heat Pipe

Best for: Custom passive laptop heat pipe routing

Compatible Device
GPU, Laptop, RAM (what this guide is about)
Material
Copper, thermal fluid
Cooling Method
Passive
Dimensions
5mm x 90mm

View on Amazon: Bopaodao 5mm x 90mm Copper Heat Pipe Affiliate link

The Bopaodao 5mm x 90mm Copper Heat Pipe is a passive cooling tube designed to move heat away from laptop components, GPUs, or RAM. It features a 5mm diameter and a 90mm length, combining copper construction with internal thermal fluid for heat transfer. You will find it useful if you need a compact heat pipe to bridge thermal zones, connecting laptop chipsets or processors directly to an existing radiator.

Pros

  • 5mm outer diameter fits tight internal laptop clearances
  • Internal thermal fluid works alongside copper for passive heat transfer
  • Compatible with laptop chipsets, GPUs, and RAM modules
  • Directional design with sharp contact end and smooth dissipation end

Cons

  • Includes only one pipe per package
  • Requires separate thermal interface material and mounting hardware
  • Rigid round profile may require custom bending or flattening for flat components

Good fit if

  • You need a 90mm long, 5mm diameter copper tube for laptop thermal routing
  • You want passive cooling for a laptop GPU, RAM, or IC chipset
  • You have an existing radiator setup to connect the dissipation end to

Skip if

  • You need flat copper shims or pre-applied thermal adhesive
  • You require a complete heatsink assembly ready to mount without modification

Verdict: Bopaodao 5mm x 90mm Copper Heat Pipe provides targeted passive thermal transfer using internal fluid and copper construction. It is a solid choice when you need custom pipe routing inside compact laptop enclosures.

Icepc 2280 M.2 Graphene Coated Copper Heatsink

Best for: laptop 2280 M.2 drives with vertical clearance

Compatible Device
Laptop, PS5 (what this guide is about)
Material
Copper
Dimensions
2.76 x 0.91 x 0.31 inches
Weight
1.75 ounces

View on Amazon: Icepc 2280 M.2 Graphene Coated Copper Heatsink Affiliate link

This copper heatsink from Icepc covers 2280-size M.2 NVMe solid-state drives. It features a graphene coating, slanted air duct slots, and an included silicone thermal pad for tool-free installation. Measuring 0.31 inches tall, 0.91 inches wide, and 2.76 inches long, it fits into laptops and compact electronics with sufficient clearance. You should consider this heatsink if you need dedicated heat dissipation for a standard 2280 drive in a portable enclosure.

Pros

  • Copper construction combined with a graphene coating
  • Includes a silicone thermal pad for tool-free installation
  • Designed specifically for standard 2280-size M.2 NVMe drives
  • Features slanted slot air duct design to increase contact area

Cons

  • Measures 0.31 inches tall, which may not fit ultra-thin laptop bays
  • Does not support shorter M.2 drive sizes such as 2230 or 2242

Good fit if

  • You have an M.2 2280 SSD in a laptop chassis with over 0.31 inches of internal clearance.
  • You want a full-cover copper cooler with an included silicone thermal pad.

Skip if

  • You require a heatsink for smaller M.2 form factors like 2230 or 2242.
  • You have an ultra-slim laptop enclosure with less than 0.31 inches of clearance.

Verdict: Icepc 2280 M.2 Graphene Coated Copper Heatsink delivers direct copper cooling with a graphene surface layer for 2280 NVMe SSDs. It offers a solid passive thermal upgrade if your laptop chassis accommodates its 0.31-inch height.

JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink

Best for: Slim laptop M.2 2280 SSD cooling

Compatible Device
Laptop, PS5, M.2 SSD (what this guide is about)
Material
Pure Copper
Dimensions
70x20x2mm
Features
Thermal Pad
Weight
1.06 ounces

View on Amazon: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink Affiliate link

This JOYJOM copper heatsink targets tight laptop builds requiring low-profile solid-state drive cooling. Measuring 70 mm by 20 mm with a 2 mm height, it fits standard M.2 2280 SSDs without crowding compact internal bays. Pure copper rated at 401 W/mK provides direct thermal transfer beneath a graphite layer and grooved surface. You receive silicone thermal padding, rubber rings, and high-temperature bandages to secure the assembly to your drive.

Pros

  • Pure copper core rated at 401 W/mK thermal conductivity
  • Slim 2 mm profile engineered for compact laptop drive bays
  • Grooved graphite-covered surface increases heat dissipation area
  • Includes silicone thermal pad, rubber rings, and high-temperature bandages

Cons

  • Limited to 2280 length M.2 solid-state drives
  • Uses rubber rings and bandages rather than rigid metal mounting brackets
  • Graphite exterior layer may show underlying bare copper

Good fit if

  • You have an M.2 2280 SSD inside a laptop with 2 mm vertical clearance.
  • You want a pure copper heat spreader with a low-profile graphite layer.
  • You need an installation kit that includes thermal padding and retention bands.

Skip if

  • You need to cool an M.2 drive in a size other than 2280.
  • You prefer screw-fixed or rigid clip-on mounting mechanisms.
  • You have sufficient clearance to run a taller 4 mm heatsink.

Verdict: JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink delivers high-conductivity copper cooling in an ultra-low-profile format tailored for tight laptop compartments. It pairs grooved thermal dissipation with bundled silicone padding and bands to stabilize drive temperatures.

Specifications side by side

Spec JIUWU 15x15x0.8mm Copper Heatsink Shims Uxcell 20mm Pure Copper Thermal Shim K5 PRO 400g Viscous Thermal Putty Easycargo 15x15x0.5mm Copper Shims 20-Pack Easycargo 100-Piece 15mm Copper Shim Kit Easycargo SODIMM Copper Memory Heatsink SGTKJSJS Copper M.2 2280 Laptop Heatsink Easycargo Laptop M.2 2280 Copper Heatsink Icepc Graphene Copper M.2 Heatsink Icepc 1.5mm Graphene Copper M.2 Heatsink GeeekPi 102-Piece Aluminum and Copper Heatsink Kit Bopaodao 120mm Flat Copper Heat Pipe Bopaodao 5mm x 90mm Copper Heat Pipe Icepc 2280 M.2 Graphene Coated Copper Heatsink JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink
Material High Purity Copper Pure Copper not stated Copper Copper C1100 Copper 100% copper Copper Copper with Graphene Coating Copper with graphene coating Aluminum, Copper 99% pure copper Copper, thermal fluid Copper Pure Copper
Cooling Method not stated not stated not stated passive not stated not stated not stated not stated not stated not stated not stated Passive Passive not stated not stated
Compatible Device Laptop GPU and CPU PC, Laptop CPU, GPU Apple iMac, Asus ROG, Acer Nitro, MSI Laptop GPU CPU IC Chips VGA RAM PC, Laptop GPU, CPU, M.2 NVMe SSD Laptop Notebook SODIMM RAM M.2 2280 SSD not stated M.2 2280 SSD, Laptop PC M.2 2280 NVMe SSD, PS5, Laptop PC Raspberry Pi, CPU, GPU, Laptop Laptop, CPU, GPU, mobile phone Laptop, PC, GPU, CPU, VRAM, RAM M.2 NVMe SSD, PS5, Laptop, PC M.2 2280 SSD, Laptop, PS5
Dimensions 15mm x 15mm x 0.8mm 0.79 x 0.79 x 0.04 inches not stated 15x15x0.5mm not stated 63mmx23mmx0.5mm not stated 77mmx22mmx1mm 70x20x2mm 70x20x1.5mm not stated 2mm x 5.5mm x 120mm 5mm x 90mm 2.76 x 0.91 x 0.31 inches 70x20x2mm
Mounting Type not stated Thermal Shim Pad not stated Pre applied adhesive tape backing not stated Pre-applied adhesive tape Rubber ring, insulation sticker Nano thermal tape Silicone Thermal Pad Adhesive thermal pad Thermal conductive adhesive tape not stated not stated not stated not stated
Features not stated not stated Thermal Pad Thermal Tape not stated Thermal Tape Thermal Pad Thermal Pad Thermal Pad not stated Thermal Tape not stated not stated not stated Thermal Pad
Length 0.59 inches 0.79 inches not stated 0.59 inches 0.6 inches 2.48 inches 3 inches 3.03 inches not stated not stated not stated not stated not stated not stated not stated
Width 0.59 inches 0.79 inches not stated 0.59 inches 0.6 inches 0.91 inches 0.87 inches 0.87 inches not stated not stated not stated not stated not stated not stated not stated
Weight 0.32 ounces 2.82 ounces 14.1 ounces not stated not stated not stated 2.89 ounces 0.51 ounces 0.71 ounces 1.59 ounces 7.83 ounces not stated not stated 1.75 ounces 1.06 ounces
Size 15mm x 15mm x 0.8mm not stated not stated 15x15x0.5mm not stated not stated not stated not stated 70*20*2mm 70x20x1.5mm not stated L: 120mm D: 5mm not stated not stated
Model GYA032 a16012800ux0600 K5 400g NA ES-C100-1515 6323-05-8810 m2-t2p 772201 CAICEPC0008-2 ICEPC0016-1.5 not stated not stated not stated ICEPC0026-B 70x20x2mm
Color not stated not stated not stated Copper Tone Copper not stated Copper Heatsinks 4-pack Black not stated not stated W: 5.5mm T: 2mm L: 90mm Black Black

How to Choose Laptop Heatsinks

  1. Thermal Tape Versus Loose Shims

    Check how the heatsink secures to your component. Some options include pre-applied thermal tape, such as the 3M 8810 adhesive on Easycargo 15x15x0.5mm Copper Shims. Adhesive tape holds the metal plate directly onto VRAM or chipset packages without requiring mounting clips or liquid paste. If you use bare copper shims without tape, you must apply your own thermal interface material to ensure heat transfers across surfaces. Choose pre-taped shims if you want immediate adherence during assembly.

  2. Assortments for Varying Component Gaps

    Select multi-thickness kits if you do not know the exact space between your chips and the stock laptop cooling assembly. The Easycargo 100-Piece 15mm Copper Shim Kit provides 12 distinct thicknesses in C1100 copper with 401 W/mK thermal conductivity. Having stepped thicknesses lets you test fit individual shims until the gap is closed without bending the motherboard. If you measure your gap in advance, you can choose a single-thickness pack instead of a multi-size assortment.

  3. Matching Specific Laptop Hardware Footprints

    Verify the target component before buying, because laptop parts require specific footprints. Standard small square shims cool individual voltage regulators or graphic memory chips. Laptop memory modules require specialized elongated plates. For example, the Easycargo SODIMM Copper Memory Heatsink measures 0.91 inches wide by 2.48 inches long, matching the standard dimensions of a SODIMM stick. Using a dedicated heatsink profile covers all surface memory chips uniformly rather than requiring multiple separate shims across the circuit board.

  4. Flat Versus Round Heat Pipes

    Check the pipe geometry if you need to route thermal energy away from tight components. Passive copper heat pipes contain internal working fluid to transfer heat across distances. The Bopaodao 120mm Flat Copper Heat Pipe features a flattened 2mm profile that slips beneath cramped laptop shells where tubular designs cannot clear. In contrast, standard 5mm round heat pipes require deeper chassis cavities. Choose flat profiles for ultra-thin laptop frames and round pipes only when vertical clearance allows.

  5. Copper Versus Finned Aluminum Materials

    Compare thermal materials based on the airflow available inside your laptop. Copper provides high thermal conductivity for direct contact transfer, while aluminum allows for lightweight extruded fin designs that release heat into moving air. The Easycargo 124-Piece Multi-Size Kit combines finned aluminum heatsinks with flat copper shims. Choose flat copper plates for tight contact points beneath the factory heat assembly. Select finned aluminum blocks only if your laptop has open interior space with active fan airflow.

  6. Coated Surfaces and Grooved Profiles

    Examine the surface structure of M.2 drive heatsinks before installation. Plain flat copper plates maximize direct surface contact, while grooved designs increase the available cooling area. The JOYJOM 2mm Graphite-Coated Copper M.2 Heatsink features a graphite surface layer and grooved ridges to promote thermal dissipation inside tight drive bays. It also includes silicone bands and thermal pads for secure retention. Choose grooved or coated copper designs when your drive compartment has minimal airflow to aid dissipation.

Frequently asked questions

Can I use copper shims to replace missing thermal pads on a laptop GPU?

Yes, you can use copper shims to fill gaps where thermal pads used to be. The JIUWU 15x15x0.8mm Copper Heatsink Shims are designed for this exact purpose. They provide uniform copper plates that bridge the 0.8mm gap between the chip and the heatsink. This method restores thermal contact when original pads degrade or are removed.

What is the thinnest copper heatsink available for laptop M.2 SSDs?

The Icepc Graphene Copper M.2 Heatsink is the thinnest option at just 2mm. It measures 0.08 inches in height, making it ideal for laptops with very tight clearance around the drive slot. The graphene coating enhances heat dissipation while maintaining a low profile that fits where standard metal plates cannot.

How do I cool laptop RAM that has very little space around it?

You should use a low-profile copper heatsink designed specifically for SODIMM memory. The Easycargo SODIMM Copper Memory Heatsink is only 0.5 mm thick. It features pre-applied thermal adhesive for direct installation. This slim design fits precisely into tight enclosures without interfering with adjacent components or the laptop lid.

Is there a thermal solution for uneven gaps between laptop components?

Yes, you can use a viscous thermal putty to bridge uneven gaps. The K5 PRO Viscous Thermal Putty replaces factory pads with a non-conductive paste. It can fill gaps up to 3mm, providing broad operating temperature tolerance. This material conforms to irregular surfaces, ensuring consistent thermal transfer where rigid shims would leave air pockets.

Can I use heat pipes to route heat away from laptop components?

Yes, you can use flat or round copper heat pipes for custom thermal routing. The Bopaodao 120mm Flat Copper Heat Pipe has a slim 2mm profile, making it practical for cramped internal spaces. These passive copper conduits help move heat away from hotspots. They are suitable for DIY repairs and modifications inside compact laptop enclosures.

What material conducts heat best for laptop component cooling?

Copper is the primary material used for high-conductivity laptop cooling solutions. Most top picks, including the JIUWU and Easycargo shims, are made of pure copper. Some M.2 heatsinks, like the Icepc model, add a graphene layer to enhance performance. Copper offers superior thermal transfer compared to aluminum, which is critical for dense laptop internals.

Do I need thermal tape with copper shims for laptops?

Many copper shim kits include pre-applied thermal tape to secure the plate. The Easycargo 15x15x0.5mm Copper Shims come with 3M 8810 adhesive. This tape holds the metal directly onto VRAM or chips, ensuring stable contact. Using adhesive prevents the shim from shifting during operation, which is vital in vibrating laptop environments.

See also