Awxlumv 100x50mm Thin Aluminum Heatsink Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This awxlumv heatsink kit 100 x review covers a passive cooling solution designed for compact electronic components. The unit measures 100x50x4mm, offering a slim profile that fits tight spaces. It is constructed from anodized aluminum, which provides efficient heat dissipation without moving parts. The base includes pre-applied thermal conductive double-sided adhesive tape, simplifying installation on flat surfaces. Weighing 36 grams per unit, it adds minimal mass to your assembly. This kit is intended for devices like NEMA 17 stepper motors or TEC1-12706 coolers. It serves as a straightforward thermal management tool for specific low-to-mid heat load applications.
What stands out
- Anodized aluminum material for durable passive cooling
- Compact 100x50x4mm dimensions for tight fits
- Pre-applied thermal conductive adhesive tape for easy mounting
- Lightweight design at 36 grams per unit
Who it fits
Good fit for
You should choose this heatsink if you are cooling stepper motors in 3D printers or small thermoelectric coolers. The adhesive backing makes it ideal for setups where drilling or screwing is not possible. It suits NEMA 17 motors that generate moderate heat. The slim 4mm height ensures it does not interfere with nearby components. If you need a low-profile, no-fan solution for specific electronics, this kit fits well.
Who should skip it
Skip this option if you require active cooling for high-power CPUs or GPUs. This is a passive heatsink with no fan, so it cannot handle high thermal loads. It is not suitable for general computer processor cooling. The adhesive mount limits repositioning once applied. If you need a robust tower cooler or a solution with multiple heat pipes, this thin aluminum plate is not the right tool for the job.
Verdict: This awxlumv heatsink is a practical, low-profile option for specific passive cooling tasks. It fits well in compact electronics but is not a general-purpose CPU cooler.
Key specs explained for this heatsink
Material: Anodized aluminum
Anodized aluminum provides a durable surface that resists corrosion while conducting heat efficiently. This material choice ensures the heatsink remains stable over time without degrading. For buyers comparing CPU air coolers, this offers a reliable thermal path. It is not as heavy as copper, making it easier to handle. The finish protects the metal from environmental wear, which is useful for long-term installation.
Dimensions: 100x50x4mm
These dimensions define the footprint and thickness of the unit. The 4mm height makes it extremely thin, allowing it to fit in tight spaces where standard coolers cannot. This slim profile is ideal for small enclosures or specific electronic components. When shopping for CPU air coolers, you will notice most are much larger. This size is best for low-profile applications rather than high-performance desktop processors.
Mounting Type: Pre-applied double side adhesive tape
The unit comes with thermal conductive adhesive tape already attached to the base. This simplifies installation by removing the need for screws or clips. You simply peel and stick the heatsink to the target component. This method is convenient for flat surfaces like stepper motors or ICs. For CPU air coolers, mechanical mounting is standard for stability. Adhesive is less secure for heavy loads but works well for lightweight passive cooling tasks.
Cooling Method: Passive cooling
Passive cooling relies on natural air convection rather than fans. The heatsink dissipates heat into the surrounding air without generating noise. This makes it silent and energy-efficient. However, it lacks the active airflow of CPU air coolers with fans. This method suits components with low to moderate heat output. If you need to cool a high-TDP processor, you would require a fan-assisted solution instead.
Design and build details
The Awxlumv heatsink uses anodized aluminum for its main body. This material choice gives the unit a durable surface that resists corrosion while conducting heat effectively. The listing specifies a slim profile measuring 100x50x4mm. This size allows it to fit into tight spaces where larger coolers cannot go. You get two size options, 100x50x4mm and 50x50x4mm, depending on your specific component needs.
Mounting is handled by pre-applied double-sided thermal conductive adhesive tape. This method means you do not need screws or brackets. You simply peel the backing and stick the unit directly to the heat source. The listing notes this is suitable for passive cooling of 3D printer stepper motors and NEMA 17 drivers. The lack of moving parts ensures silent operation, which is useful in sensitive environments.
Each unit weighs 36 grams, or 1.27 ounces. This light weight makes it easy to handle during installation. The finish is smooth and flat, ensuring good contact with the adhesive tape. According to the listing, this design is intended for compact electronic components rather than high-end CPUs. You should verify that the adhesive strength is sufficient for your specific orientation and vibration levels before relying on it for critical hardware.
Setup and everyday use guide
Installing this heatsink is straightforward because it relies on a pre-applied thermal conductive adhesive tape. You do not need screws, clips, or separate thermal paste. The backing is already on the unit, so you simply peel the protective layer and press the heatsink onto the target component. This method suits tight spaces where traditional mounting hardware cannot fit. The dimensions of 100x50x4mm allow it to sit flush against small electronic parts without adding significant bulk. The weight is 36 grams per unit, which is light enough that the adhesive can hold it securely without sagging over time. This passive cooling solution works best with components that generate moderate heat. The listing notes compatibility with 3D printer stepper motors and NEMA 17 units. It also mentions use with TEC1-12706 Thermoelectric Peltier Coolers. These devices often have flat surfaces that bond well with the double-sided tape. In daily use, the anodized aluminum surface dissipates heat into the surrounding air. There are no fans or moving parts to maintain. You just ensure the component stays within its operating temperature range. The adhesive remains in place during normal operation. If you need to remove it later, you may need to apply heat or solvent to break the bond. This kit is ideal for users who want a low-profile, no-fuss cooling option for specific electronics. It does not fit standard CPU sockets. It is designed for compact, passive thermal management tasks.
Who Should Skip This Heatsink
You should verify that your target component fits within the 100x50mm footprint before purchasing. This unit is designed for passive cooling of stepper motors and TEC1-12706 coolers, not for high-heat CPU sockets. If you are looking for a primary CPU air cooler, this thin aluminum block is not the right tool. It lacks the fin density and fan compatibility needed for processor thermal management. You will need to ensure your enclosure allows for adequate airflow around the anodized surface. Since it uses pre-applied adhesive, check that the mounting surface is clean and flat for proper thermal contact. Upkeep is minimal, but you should periodically inspect the adhesive bond if the unit is subject to vibration. For general CPU cooling needs, consider comparing this against the 1 other options in our CPU Air Coolers & Thermal Paste guide. Those products offer robust mounting systems and higher thermal performance. This heatsink is a specialized accessory for specific low-power electronics rather than a general-purpose computing solution.
Check before you buy
- Confirm the 100x50mm footprint matches your component size
- Verify the device does not exceed passive cooling limits
- Ensure the mounting surface is flat and clean
- Check if your enclosure allows sufficient airflow
- Determine if you need a primary CPU cooler instead
The product at a glance
Awxlumv 100x50mm Thin Aluminum Heatsink
Best for: cooling stepper motors and small electronics
- Material
- Anodized aluminum
- Cooling Method
- Passive cooling
- Compatible Device
- 3D printers stepper motor, NEMA 17
- Dimensions
- 100x50x4mm
- Mounting Type
- Pre-applied double side adhesive tape
- Features
- Thermal Tape
View on Amazon: Awxlumv 100x50mm Thin Aluminum Heatsink Affiliate link
This Awxlumv heatsink is a 100x50x4mm passive cooling solution made from anodized aluminum. It features a pre-applied thermal conductive adhesive tape for easy installation. The unit weighs 36 grams and measures 3.94 x 1.97 x 0.16 inches. It is designed for passive cooling applications like 3D printer stepper motors and NEMA 17 drivers. You should use this if you need a low-profile, ready-to-attach heat sink for small electronic components.
Pros
- 100x50x4mm anodized aluminum construction
- Pre-applied thermal conductive adhesive tape
- Lightweight at 36 grams per unit
- Passive cooling design requires no power
Cons
- Passive cooling limits heat dissipation capacity
- Adhesive mounting restricts repositioning options
- Small surface area compared to large CPU coolers
Good fit if
- You need to cool a NEMA 17 stepper motor
- You require a thin 4mm profile for tight spaces
- You want a passive solution for TEC1-12706 coolers
Skip if
- You need active cooling with a fan
- You are cooling a high-wattage desktop CPU
- You need adjustable fan speed settings
Verdict: Awxlumv 100x50mm Thin Aluminum Heatsink is a compact passive cooling option for low-power electronics. It fits users who need a simple, adhesive-mounted heat sink for stepper motors or small thermoelectric devices.
Specifications side by side
| Spec | Awxlumv 100x50mm Thin Aluminum Heatsink |
|---|---|
| Material | Anodized aluminum |
| Cooling Method | Passive cooling |
| Compatible Device | 3D printers stepper motor, NEMA 17 |
| Dimensions | 100x50x4mm |
| Mounting Type | Pre-applied double side adhesive tape |
| Features | Thermal Tape |
| Model | 100x50x4mm |
Frequently asked questions
Does the Awxlumv 100x50mm heatsink come with thermal paste?
No, it does not include loose thermal paste. Instead, the unit features a pre-applied thermal tape on the base. You simply peel off the protective backing and stick the heatsink directly to your component. This adhesive method simplifies installation by removing the need for separate thermal compound application.
What is the exact thickness of this aluminum heatsink?
The heatsink has a thickness of 4mm, which equals 0.16 inches. This slim profile allows it to fit into tight spaces where bulkier coolers would not fit. The overall dimensions are 100x50x4mm, making it suitable for compact electronic setups that require passive cooling without adding significant height.
Is this heatsink suitable for cooling a standard desktop CPU?
No, this unit is not designed for standard desktop CPUs. It is intended for low-power components like stepper motors and small thermoelectric coolers. The passive aluminum design lacks the fan and large surface area needed to dissipate the high heat generated by modern processors effectively.
How does the anodized aluminum material benefit this heatsink?
The anodized aluminum construction provides a durable surface that resists corrosion. This treatment helps the heatsink maintain its structural integrity and thermal performance over time. Aluminum also conducts heat efficiently, allowing the unit to draw heat away from the attached component and dissipate it into the surrounding air.
Can I use screws to mount this heatsink instead of the adhesive?
The product is designed primarily for adhesive mounting via its pre-applied thermal tape. The data does not mention pre-drilled holes or mounting brackets for screw installation. You should rely on the thermal tape for secure attachment to ensure proper contact and heat transfer to the component surface.
What type of electronics can this 100x50mm heatsink cool?
This heatsink is best for cooling stepper motors and small electronics. It is also suitable for small thermoelectric devices like TEC1-12706 coolers. The compact size and passive design make it ideal for low-power applications where space is limited and active fans are not desired or feasible.