Looking Beyond the Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The awxlumv aluminum large heatsink 5 9 alternatives list helps you find options if the original Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack does not fit your specific needs. This heatsink is made of high-quality aluminum and offers a large surface area to reduce overheating risks. It weighs 10.9 ounces and measures 5.9 by 3.6 by 0.59 inches. Its black finish and substantial base thickness make it suitable for large power components, voltage regulators, and MOSFETs where bulk is acceptable. However, you might need a different size, a single unit instead of a pack, or a solution for tighter spaces.
We selected these alternatives because their specifications overlap with the original product while offering distinct advantages. Some options provide better value for small passive cooling tasks, while others are designed for NVMe SSDs or VRMs. You will find choices that vary in dimensions, material thickness, and included accessories like thermal tape. This guide compares these items strictly by their published specs to help you decide which heatsink best matches your hardware requirements. Each entry is ranked based on how well it serves specific use cases, from low-power ICs to larger power transistors.
Comparing heatsink alternatives to Awxlumv
Awxlumv 120mm Aluminum Heatsink
The Awxlumv 120mm heatsink offers a medium-sized profile at 120x69x27mm, making it smaller than the 150x93x15mm original. It weighs 7.76 ounces, which is lighter than the 10.9 ounces of the original two-pack. This model is best for NVMe SSDs and MOSFET cooling where bulk is a concern. You should pick this if you need a single unit for tighter spaces. It lacks the massive surface area of the original 150mm block. However, its compact dimensions provide adequate passive cooling for low to medium power components. It is a practical choice for builders who do not need the largest possible heat dissipation area.
Awxlumv 25mm Small Aluminum Heatsink 6-Pack
The Awxlumv 25mm heatsink is a compact option measuring 25x25x10mm. It weighs only 1.27 ounces per unit, significantly lighter than the original. This pack includes six small sinks, ideal for low-power chips or handheld consoles. You should choose this for small, adhesive-mounted applications where space is extremely limited. It gives up the large surface area of the original 150mm block entirely. This model is not suitable for high-heat components like large voltage regulators. It is best for passive cooling of small electronics where minimal footprint is required. The anodized finish provides durability for compact builds.
Walfront Black Aluminum Heatsink 50x12.7x100mm
The Walfront heatsink measures 50x12.7x100mm, offering a different shape than the original 150x93x15mm block. It is designed for low-power components in tight spaces, such as routers or small amplifiers. This model is best for users who cannot fit the larger original heatsink. It gives up the wide footprint of the original for a more linear profile. This makes it suitable for narrow slots or specific electronic enclosures. It is a compact aluminum solution for localized heat dissipation. You should pick this if your project requires a smaller, specialized form factor rather than a large, general-purpose heatsink.
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
The ZZHXSM 80mm heatsink measures 80x40x11mm, which is much smaller than the original 150x93x15mm block. It weighs 1.26 ounces, significantly lighter than the original. This two-pack includes thermal tape for easy installation. It is best for passive cooling of small electronics like LEDs or FPV gear. You should choose this for low-heat devices in compact spaces. It gives up the large surface area of the original for a more discreet profile. This model is not suitable for high-power components. It is a reliable option for users needing small, adhesive-mounted sinks for specific low-power applications.
SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink
The SGTKJSJS 5.9x2.91 heatsink measures 150x74x10mm, sharing the same length as the original but with a narrower width and reduced height. It weighs 10.7 ounces, slightly lighter than the original. It includes thermal tape for installation. This model is best for passive cooling of low-power ICs, voltage regulators, or MOSFETs. You should pick this if you need a similar length but a smaller footprint. It gives up some surface area compared to the original 150x93x15mm block. It is not suitable for high-power CPUs. This is a practical choice for tight spaces where the original might be too bulky.
Awxlumv 40x40x20mm Aluminum Heatsink
The Awxlumv 40x40x20mm heatsink is a small square unit measuring 40x40x20mm. It weighs 3.76 ounces, much lighter than the original. It includes thermal tape for mounting. This model is best for VRM and power IC passive cooling on flat surfaces. You should choose this for localized heat dissipation on motherboards or 3D printers. It gives up the large surface area of the original for a compact, targeted solution. It is not suitable for cooling large components. This is a simple, adhesive-backed option for users who need small, specific heatsinks for power management areas.
Quick picks
Our 7 picks
Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack
Best for: large power components and voltage regulators
- Material
- Aluminum
- Dimensions
- 150 x 93x 15 mm
- Color
- Black
- Weight
- 10.9 ounces
View on Amazon: Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack Affiliate link
This pack includes two large aluminum heatsinks measuring 150 by 93 by 15 mm. The base board is 4.3 mm thick, and the fins are 2 mm thick. Black anodized aluminum provides good thermal conductivity. You get 10.9 ounces of material for cooling power transistors, ICs, or voltage regulators. The design maximizes surface area to reduce overheating risks.
Pros
- Large 150 x 93 x 15 mm dimensions
- Thick 4.3 mm base board
- Black aluminum for better heat dissipation
- Includes two units per pack
Cons
- Thin 15 mm fin height limits airflow
- No thermal adhesive or mounting hardware included
- Heavy 10.9 ounce weight per pack
Good fit if
- You need large surface area for high-power components
- You are cooling voltage regulators or MOSFETs
- You prefer black aluminum for aesthetics
Skip if
- You require mounting screws or thermal pads
- You need compact heatsinks under 50 mm
- You are cooling small ICs like M.2 SSDs
Verdict: Awxlumv 150x93x15mm Aluminum Heatsink suits builders cooling large power components who need maximum surface area. It works well for voltage regulators or MOSFETs where bulk is acceptable.
Awxlumv 120mm Aluminum Heatsink
Best for: NVMe SSDs and MOSFET cooling
- Material
- Black anodized aluminum
- Compatible Device
- Computer, MOSFET, NVME SSD, GPU
- Dimensions
- 120 x 69 x 27mm
- Weight
- 7.76 ounces
View on Amazon: Awxlumv 120mm Aluminum Heatsink Affiliate link
This heatsink measures 120 by 69 by 27mm. It features 22 fins and a black anodized aluminum finish. The unit weighs 7.76 ounces. It suits NVMe SSDs, MOSFETs, and GPU backing plates. You get a single unit per package. The size offers more surface area than smaller options. It is a solid choice for moderate heat dissipation needs.
Pros
- 22 fins for increased surface area
- Black anodized aluminum construction
- 120 x 69 x 27mm dimensions
- Versatile for MOSFETs and SSDs
Cons
- Single unit per package
- No included thermal adhesive
- Smaller than 150mm large heatsinks
Good fit if
- You need a heatsink for an NVMe SSD
- You are cooling a MOSFET or power transistor
- You require a 120mm length heatsink
Skip if
- You need a 2-pack or multi-pack
- You require a 150mm length heatsink
- You want pre-applied thermal adhesive
Verdict: Awxlumv 120x69x27mm Black Aluminum Heatsink fits users needing a single, medium-sized sink for SSDs or power components. It lacks the bulk of larger 150mm options.
Awxlumv 25mm Small Aluminum Heatsink 6-Pack
Best for: small passive cooling for chips
- Material
- anodized aluminum
- Cooling Method
- passive cooling
- Compatible Device
- ASUS ROG Ally
- Dimensions
- 25 x 25 x 10mm
- Mounting Type
- Pre-applied thermal conductive tape
- Color
- Black
View on Amazon: Awxlumv 25mm Small Aluminum Heatsink 6-Pack Affiliate link
This is a set of six small aluminum heatsinks measuring 25 by 25 by 10 millimeters. Each unit weighs 5.7 grams and features eight fins for passive cooling. The black anodized surface helps with heat dissipation. You get pre-applied thermal conductive adhesive tape on the back. This allows for easy installation without extra glue. It fits chips, power ICs, and the ASUS ROG Ally.
Pros
- Compact 25x25x10mm size fits tight spaces
- Pre-applied thermal tape for quick mounting
- Black anodized aluminum for passive cooling
- Includes six units per package
Cons
- Small surface area limits high heat loads
- Passive cooling only, no fan support
- Adhesive backing may not suit all surfaces
Good fit if
- You need passive cooling for small chips
- You are upgrading an ASUS ROG Ally
- You want a quick adhesive mount solution
Skip if
- You require active fan-based cooling
- You need to dissipate high wattage
- You prefer screw-mount hardware
Verdict: Awxlumv 25x25x10mm Anodized Heatsink is a compact passive cooling solution for low-power components. It suits users who need small, adhesive-mounted sinks for chips or handheld consoles.
Walfront Black Aluminum Heatsink 50x12.7x100mm
Best for: Low-power components in tight spaces
- Material
- Aluminum
- Compatible Device
- Router, CPU, Amplifier, Motherboard
- Dimensions
- 50x12.7x100mm
- Color
- Black
View on Amazon: Walfront Black Aluminum Heatsink 50x12.7x100mm Affiliate link
This Walfront heatsink is a black aluminum block measuring 50 by 12.7 by 100 millimeters. It features slotted fine teeth machined into the surface to enhance heat dissipation. The unit is lightweight and compact, allowing for easy installation and disassembly. You can use it on routers, CPUs, amplifiers, power supplies, and various electronic components. It helps reduce hardware failure caused by overheating.
Pros
- Constructed from durable aluminum material
- Features slotted fine teeth for better heat dissipation
- Compact dimensions of 50 x 12.7 x 100 mm
- Black finish for discreet mounting
Cons
- Very narrow width of 12.7 mm limits surface area
- No thermal adhesive or mounting hardware included
- Small footprint may not suit high-power chips
Good fit if
- You need a compact cooler for low-heat components
- You are cooling routers or small amplifiers
- You have tight space constraints on a motherboard
Skip if
- You require a heatsink for a high-TDP CPU
- You need a wide base for maximum contact
- You want pre-applied thermal adhesive for easy setup
Verdict: Walfront Black Aluminum Heatsink 50x12.7x100mm is a compact solution for low-power electronics like routers and small amplifiers. It fits well in tight spaces where larger aluminum blocks will not fit.
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
Best for: passive cooling of small electronics
- Material
- Black anodized aluminum
- Cooling Method
- Passive
- Compatible Device
- 3D printers, LEDs, FPV transmitters
- Dimensions
- 80 x 40 x 11mm
- Mounting Type
- Thermal conductive adhesive tape
- Weight
- 1.26 ounces
View on Amazon: ZZHXSM 80mm Black Aluminum Heatsink 2-Pack Affiliate link
This ZZHXSM heatsink is a passive cooling solution made from black anodized aluminum. It measures 80 x 40 x 11mm and weighs 1.26 ounces each. The unit comes with pre-coated thermal conductive adhesive tape for easy installation. You should use it for passive cooling applications like 3D printers, LEDs, or FPV transmitters. The design maximizes surface area contact with cool air to dissipate heat effectively without fans.
Pros
- Includes 2 black anodized aluminum radiators
- Pre-coated thermal conductive adhesive tape
- Compact 80 x 40 x 11mm dimensions
- Lightweight at 1.26 ounces each
Cons
- Passive cooling only, no fan included
- Smaller surface area than larger heatsinks
- Adhesive mounting limits repositioning
Good fit if
- You need passive cooling for small components
- You are building a 3D printer or LED setup
- You require compact dimensions for tight spaces
Skip if
- You need active cooling with a fan
- You require high heat dissipation for CPUs
- You prefer screw-mounting over adhesive
Verdict: ZZHXSM 80x40x11mm Black Aluminum Heatsink fits users who need reliable passive cooling for low-heat devices like LEDs or FPV gear in compact spaces.
SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink
Best for: passive cooling of low-power ICs
- Material
- Aluminum
- Dimensions
- 5.9 x 2.91 x 0.39 inch
- Mounting Type
- Thermal Conductive Adhesive Tape
- Color
- Black
- Weight
- 10.7 ounces
View on Amazon: SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink Affiliate link
This SGTKJSJS heatsink measures 150 x 74 x 10 mm. It is made of black anodized aluminum and includes two units. Each piece weighs 10.7 ounces for the pair. The fins are pre-coated with thermal tape for easy mounting. You should use this for power transistors, ICs, or MOSFETs on PCB boards. The thin 10 mm profile fits tight spaces.
Pros
- Black anodized aluminum construction
- Pre-applied thermal adhesive tape
- Includes two units
- 150 mm length for surface area
Cons
- 10 mm thickness limits cooling capacity
- No fan mounting holes included
- Adhesive backing may not suit all surfaces
Good fit if
- You need passive cooling for small components
- You require two identical heatsinks
- Space is limited to 10 mm height
Skip if
- You need active fan cooling
- You require thick fin stacks for high heat
- You need screw-mounting options
Verdict: SGTKJSJS 150x74x10mm Black Aluminum Heatsink suits you if you need passive cooling for low-heat components like voltage regulators or MOSFETs in tight spaces. It is not suitable for high-power CPUs.
Awxlumv 40x40x20mm Aluminum Heatsink
Best for: VRM and power IC passive cooling
- Material
- Aluminum alloy
- Dimensions
- 1.57 x 1.57 x 0.79 inches
- Mounting Type
- Thermal Conductive Adhesive Tape
- Color
- Black
- Compatible Device
- GPU, VRM, 3D Printer
- Weight
- 3.76 ounces
View on Amazon: Awxlumv 40x40x20mm Aluminum Heatsink Affiliate link
This 40x40x20mm aluminum heatsink is designed for VRM and GPU cooling. It measures 1.57 x 1.57 x 0.79 inches and weighs 3.76 ounces. The unit includes pre-applied thermal adhesive tape for direct mounting. You can attach it to power ICs, regulators, or 3D printer motors. The black anodized finish helps with heat dissipation in enclosed spaces.
Pros
- 40x40x20mm aluminum alloy construction
- Pre-applied thermal conductive adhesive tape
- Black anodized finish for durability
- Suitable for VRM and GPU backplates
Cons
- Passive cooling only, requires airflow
- Adhesive backing limits repositioning
- No mounting holes for screws
Good fit if
- You need to cool VRM components
- You want to attach it to flat surfaces
- You are cooling power ICs or regulators
Skip if
- You need active fan cooling
- You require screw-mounting options
- You need a larger surface area
Verdict: Awxlumv 40x40x20mm Black Aluminum Heatsink fits users who need passive cooling for VRMs or power ICs on flat surfaces. It is a simple, adhesive-backed solution for localized heat dissipation.
Specifications side by side
| Spec | Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack | Awxlumv 120mm Aluminum Heatsink | Awxlumv 25mm Small Aluminum Heatsink 6-Pack | Walfront Black Aluminum Heatsink 50x12.7x100mm | ZZHXSM 80mm Black Aluminum Heatsink 2-Pack | SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink | Awxlumv 40x40x20mm Aluminum Heatsink |
|---|---|---|---|---|---|---|---|
| Material | Aluminum | Black anodized aluminum | anodized aluminum | Aluminum | Black anodized aluminum | Aluminum | Aluminum alloy |
| Cooling Method | not stated | not stated | passive cooling | not stated | Passive | not stated | not stated |
| Compatible Device | not stated | Computer, MOSFET, NVME SSD, GPU | ASUS ROG Ally | Router, CPU, Amplifier, Motherboard | 3D printers, LEDs, FPV transmitters | not stated | not stated |
| Dimensions | 150 x 93x 15 mm | 120 x 69 x 27mm | 25 x 25 x 10mm | 50x12.7x100mm | 80 x 40 x 11mm | 5.9 x 2.91 x 0.39 inch | 1.57 x 1.57 x 0.79 inches |
| Mounting Type | not stated | not stated | Pre-applied thermal conductive tape | not stated | Thermal conductive adhesive tape | Thermal Conductive Adhesive Tape | Thermal Conductive Adhesive Tape |
| Color | Black | Black | Black | Black | Black | Black | Black |
| Features | not stated | not stated | not stated | not stated | Thermal Tape | Thermal Tape | Thermal Tape |
| Weight | 10.9 ounces | 7.76 ounces | 1.27 ounces | not stated | 1.26 ounces | 10.7 ounces | 3.76 ounces |
| Size | 2 Pcs | not stated | 25 x25 x10 | not stated | not stated | not stated | not stated |
| Model | 2個 | 69x27 mm | 25x25x10 mm | not stated | AHEATS-80x40x11-2 | 2DSRP-1571 | 40x40x20 mm |
If you want other aluminum gear, you can review the scanpan classic black aluminum 9 5 alternatives.
Frequently asked questions
Which Awxlumv heatsink is best for large power components?
The Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack is the top choice for cooling large power components and voltage regulators. It provides maximum surface area for bulkier applications. The two-pack includes black aluminum sinks with dimensions of 150x93x15mm each. This size suits builders who need significant passive cooling capacity for MOSFETs or similar high-heat parts.
What is the best budget option for small chips?
The Awxlumv 25mm Small Aluminum Heatsink 6-Pack is the best budget pick for small passive cooling needs. It measures 25x25x10mm and weighs only 1.27 ounces. This compact size is ideal for low-power components, chips, or handheld consoles. The six-pack allows you to cool multiple small areas simultaneously without taking up much space.
Are there heatsinks with thermal tape included?
Yes, several options include thermal tape for easier installation. The ZZHXSM 80mm Black Aluminum Heatsink 2-Pack features thermal tape and measures 80x40x11mm. Similarly, the SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink and the Awxlumv 40x40x20mm model also come with thermal tape. These adhesives simplify mounting on flat surfaces like VRMs or ICs.
Which heatsink is best for VRM cooling?
The Awxlumv 40x40x20mm Aluminum Heatsink is designated as the best option for VRM and power IC passive cooling. It measures 40x40x20mm and includes thermal tape for secure attachment. This square profile fits well on flat surfaces near voltage regulators. It provides localized heat dissipation for power components without requiring complex mounting hardware.
Is there a compact option for tight spaces?
The Walfront Black Aluminum Heatsink 50x12.7x100mm is designed for low-power components in tight spaces. It is suitable for routers and small amplifiers where larger blocks will not fit. Its slim profile allows it to fit into constrained areas. This makes it a practical choice for electronics that generate minimal heat but require reliable passive cooling.
What is the largest heatsink in this list?
The Awxlumv 150x93x15mm Aluminum Heatsink 2-Pack is the largest option available. Each sink measures 150x93x15mm, providing substantial surface area. The two-pack weighs 10.9 ounces total. This size is ideal for users who need to cool large power components or voltage regulators where bulk is acceptable and maximum heat dissipation is required.
Can I use these heatsinks for NVMe SSDs?
The Awxlumv 120mm Aluminum Heatsink is specifically recommended for NVMe SSDs. It measures 120x69x27mm and weighs 7.76 ounces. This medium-sized sink fits users needing a single unit for SSD cooling. It lacks the bulk of larger 150mm options, making it a versatile choice for M.2 drives that require moderate passive heat dissipation.