Awxlumv 80mm Aluminum Heatsink Alternatives: 6 Similar Picks Compared

Comparing similar heatsink options

Prolimatech Nano Aluminum Thermal Compound 1.5g

This entry is not a heatsink but a thermal compound. It addresses the interface between the CPU and cooler rather than providing the cooling structure itself. The Prolimatech paste offers a small 1.5g amount for precise application. It differs significantly from the Awxlumv unit, which is a standalone passive aluminum block. You need this paste to ensure efficient heat transfer if you pair it with the Awxlumv sink or another cooler. It does not dissipate heat on its own. Choose this if you already have a heatsink and need high-quality thermal paste to bridge the gap between your processor and the metal fins. It is a component, not a complete cooling solution.

Uxcell 100mm Aluminum Heatsink 5-Pack

The Uxcell heatsink is larger than the Awxlumv model. It measures 8 x 1.8 x 4.5 inches compared to the 80mm square footprint of the original. This size increase provides more surface area for passive cooling. It is better suited for high-power components like LED amplifiers and power transistors that generate more heat than the typical router or PCH chip. The Awxlumv sink is compact and fits tight spaces. The Uxcell unit requires more physical room but offers greater thermal mass. Pick this alternative if your device runs hotter and you have the space for a wider, taller aluminum fin stack. It serves a similar passive role but scales up for higher loads.

Dynatron K6 80mm 1U Server Fan

This product is a fan, not a heatsink. The Dynatron K6 provides active airflow, which changes the cooling method entirely. The Awxlumv sink relies on passive convection through its 26 fins. This fan forces air through a heatsink to improve heat dissipation. It is designed for 1U server racks and LGA115x CPUs, which generate significant heat. You would pair this fan with a compatible heatsink rather than using it alone. Choose this if your passive Awxlumv-style sink is insufficient for your processor’s thermal output. It adds complexity and noise but delivers much higher cooling performance than any passive aluminum block. It is an active solution for high-performance needs.

Walfront 24-Fin Aluminum Heatsink

The Walfront heatsink is a passive aluminum block with 24 fins. It is larger than the Awxlumv 80mm unit, measuring 150 x 59 x 25 mm. This increased surface area makes it better for high-power LED arrays and fish lighting. The Awxlumv sink is ideal for low-power electronics like voltage regulators. The Walfront model handles higher thermal loads due to its size. It lacks the compact 80mm footprint, so it does not fit the same mounting spaces. Select this alternative if you are cooling high-wattage lighting or power modules that exceed the capacity of the smaller Awxlumv sink. It offers robust passive cooling for applications that generate more heat than standard computer chips.

Dynatron 2U Active Aluminum SP3 Heatsink

This is a specialized active heatsink for AMD EPYC SP3 processors. It is designed for 2U server chassis, unlike the compact 80mm Awxlumv sink. It uses active cooling, likely with a fan, to manage the high heat output of server CPUs. The Awxlumv unit is passive and suited for low-power devices. This Dynatron model is for high-performance computing environments. It provides a much larger cooling surface and active airflow. You should choose this if you are building a server with an EPYC processor. It is not a direct replacement for the small Awxlumv sink but serves a similar passive-to-active upgrade path for high-end systems requiring serious thermal management.

Easycargo 20-Piece Copper and Aluminum Heatsink Kit

The Easycargo kit is a set of small copper and aluminum heatsinks for Raspberry Pi boards. It contains 20 pieces with thermal tape. This is a multi-component solution for single-board computers. The Awxlumv sink is a single large unit for general electronics. The Easycargo kit is specialized for the specific heat sources on a Pi board. It offers passive cooling for multiple chips simultaneously. It is not suitable for routers or amplifiers. Pick this if you are cooling a Raspberry Pi 5 or 4. It provides targeted passive cooling for low-power SBCs. The Awxlumv sink is a better choice for broader electronic projects that require a larger, single heatsink block.

Quick picks

Our 7 picks

1 Best overall

Awxlumv 80mm Aluminum Heatsink

Best for: passive cooling of routers and amplifiers

Material

6063-T5 aluminum alloy

Cooling Method

Passive

Compatible Device

Routers, PCH chips, ICs, amplifiers

Dimensions

80 x 80 x 27 mm

Weight

7.41 ounces

View on Amazon: Awxlumv 80mm Aluminum Heatsink Affiliate link

This Awxlumv heatsink uses 6063-T5 aluminum alloy for passive cooling. It measures 80 x 80 x 27 mm with 26 fins. The design weighs 6.9 oz and features anodized, burr-free edges. You can mount it on routers, PCH chips, or amplifiers. It works well for long-term electronic cooling projects. The unit requires a separate fan for active airflow.

Pros

• Made of 6063-T5 aluminum alloy
• 26 fins for large heat dissipation area
• Standard 80mm universal size
• Anodized surface with smooth edges

Cons

• Passive cooling only, no fan included
• No heat pipes for enhanced transfer
• Heavy for its small footprint at 6.9 oz

Good fit if

• You need passive cooling for a router or amplifier
• You require a standard 80mm footprint for tight spaces
• You are building a DIY electronics project

Skip if

• You need active cooling with an included fan
• You are cooling a high-TDP CPU directly
• You require heat pipe technology for better performance

Verdict: Awxlumv 80mm Aluminum Heatsink fits you if you need a sturdy, passive cooler for low-power electronics like routers or PCH chips. It does not suit high-heat components that require active airflow or heat pipes.

2 Also great

Prolimatech Nano Aluminum Thermal Compound 1.5g

Best for: Small 80mm heatsink thermal interface

Material

Aluminum

Dimensions

6.3 × 2.76 × 2.56 inches

View on Amazon: Prolimatech Nano Aluminum Thermal Compound 1.5g Affiliate link

This is a thermal compound designed for efficient heat transfer between a CPU and its cooler. It features a thermal conductivity of 10.2 W/m C. The paste is non-corrosive and electrically non-conductive, which protects your components. It comes in a 1.5g syringe with an applicator. This product suits builders who want a thin, even layer for better cooling performance without baking time.

Pros

• High thermal conductivity of 10.2 W/m C
• Non-corrosive and electrically non-conductive
• No baking time required for installation
• Includes 1.5g syringe and applicator

Cons

• Small 1.5g quantity limits use to one or two builds
• Passive compound requires a separate fan or heatsink for active cooling
• Lacks detailed viscosity or pump-down time specifications

Good fit if

• You need a reliable paste for a small 80mm heatsink setup
• You want a non-conductive compound for safe application
• You prefer a paste that spreads easily in thin layers

Skip if

• You require a high-capacity tube for multiple builds
• You are looking for an active cooling solution with a fan
• You need detailed pump-down time data for extreme overclocking

Verdict: Prolimatech PK-2 Nano Thermal Paste offers solid heat conduction for small form factor builds. It is a practical choice for users who prioritize safety and ease of application over long-term pump-down performance data.

3 Also great

Uxcell 100mm Aluminum Heatsink 5-Pack

Best for: LED amplifiers and power transistors

Material

Aluminum

Compatible Device

Led Amplifier Transistor IC Module

Dimensions

100x25x10mm

View on Amazon: Uxcell 100mm Aluminum Heatsink 5-Pack Affiliate link

This Uxcell heatsink uses high-quality aluminum to maximize surface area for heat dissipation. The fins increase contact with cooling air, helping to prevent overheating in electronic components. It measures 8 by 1.8 by 4.5 inches and weighs 6.1 ounces. The package includes five units. You can use these for LED lights, power transistors, ICs, and voltage regulators. The design is small and light.

Pros

• Made of high-quality aluminum for good thermal conductivity
• Eight fins maximize surface area for greater heat transfer
• Includes five heatsinks in one package
• Lightweight at 6.1 ounces net weight

Cons

• Smaller fin height than the 27mm Prolimatech option
• No fan included for active cooling
• Passive design only suitable for low-to-medium heat loads

Good fit if

• You need passive cooling for LED amplifiers
• You are replacing heatsinks for power transistors or ICs
• You want a lightweight aluminum solution for voltage regulators

Skip if

• You require active cooling with an integrated fan
• You need a larger surface area than 8 by 4.5 inches
• You are cooling a high-power CPU that needs heat pipes

Verdict: Uxcell 8x1.8x4.5 in Aluminum Heatsink offers a practical passive cooling solution for LED amplifiers and power transistors. It fits builders who need lightweight aluminum fins for voltage regulators or ICs without the complexity of active fans.

4 Also great

Dynatron K6 80mm 1U Server Fan

Best for: 1U server racks with LGA115x CPUs

Socket Compatibility

LGA1151, LGA1155, LGA1156

Material

Aluminum 6061 Skived Fins

Server Height

1U

Cooling Method

Active PWM Blower

Fan Size

80 x 80 x 15 mm

Dimensions

3.15 x 3.15 x 0.59 inches

View on Amazon: Dynatron K6 80mm 1U Server Fan Affiliate link

The Dynatron K6 is a low-profile cooling solution designed for 1U server chassis. It features an 80x80x15 mm aluminum heatsink with skived fins. The unit includes a PWM blower fan that spins at 3000 RPM. This configuration delivers 9.0 CFM of airflow. It supports Intel LGA1151, LGA1155, and LGA1156 sockets. You should choose this if you need compact active cooling for a server build.

Pros

• Fits 1U server height constraints
• 80x80x15 mm compact fan size
• 3000 RPM PWM fan speed
• Skived fin aluminum heatsink

Cons

• Limited to 1U chassis depth
• High noise level at 38.7 dBA
• Low air pressure at 0.52 inch-H2O

Good fit if

• You are building a 1U server
• You need active cooling for LGA115x sockets
• You require a 80mm fan form factor

Skip if

• You need a standard desktop tower cooler
• You require silent operation under load
• You have a chassis taller than 1U

Verdict: Dynatron K6 80mm 1U Server Fan is a specialized solution for 1U server racks. It fits users who need active cooling for LGA115x processors in tight spaces.

5 Best passive

Walfront 24-Fin Aluminum Heatsink

Best for: High-power LED and fish lighting cooling

Material

Aluminum

Cooling Method

Passive

Compatible Device

LED light, power transistor

Dimensions

150 x 59 x 25 mm

Weight

5.64 ounces

View on Amazon: Walfront 24-Fin Aluminum Heatsink Affiliate link

This Walfront heatsink uses 24 aluminum fins to spread heat across a large surface area. The dimensions are 150 mm x 59 mm x 25 mm. It weighs 5.64 ounces. The design targets high-power household LED lights and fish LED devices. You need to verify the size fits your component before installation. It reduces overheating risks for specific semiconductor devices.

Pros

• 24 fins increase heat transfer area
• Aluminum material provides good thermal conductivity
• Dimensions of 150 mm x 59 mm x 25 mm
• Weight is 5.64 ounces

Cons

• Limited to household LED and fish LED devices
• No fan included for active cooling
• Not designed for standard CPU sockets

Good fit if

• You need to cool high-power LED modules
• You require a passive aluminum heatsink for fish lighting
• You need a 150 mm long fin stack

Skip if

• You are cooling a standard desktop CPU
• You need active cooling with a fan
• You require mounting for AM4 or AM5 processors

Verdict: Walfront Aluminum Heatsink 150x59x25mm is a passive cooling solution for LED arrays. It suits users with high-power fish or household lighting who need a large surface area for heat dissipation.

6 Best premium

Dynatron 2U Active Aluminum SP3 Heatsink

Best for: AMD EPYC Socket SP3 server builds

Socket Compatibility

Socket SP3

Material

Aluminum

Server Height

2U

Cooling Method

Active

Compatible Device

AMD EPYC

Dimensions

5 × 4.5 × 6 inches

View on Amazon: Dynatron 2U Active Aluminum SP3 Heatsink Affiliate link

The Dynatron A26 is an active aluminum heatsink designed for AMD EPYC processors using Socket SP3. It features embedded heatpipes to transfer heat away from the CPU. The unit measures 4.5 by 5 by 6 inches and weighs 1 pound. It is built for 2U server chassis. You should choose this if you need reliable cooling for high-end server hardware in a standard rack space.

Pros

• Compatible with AMD EPYC Socket SP3
• Active cooling with embedded heatpipes
• Aluminum construction for efficient heat dissipation
• Fits standard 2U server chassis

Cons

• Limited to Socket SP3 compatibility
• Requires active fan setup
• Specific 2U form factor limits use

Good fit if

• You are building an AMD EPYC server
• You need a 2U compatible cooler
• You require active heatpipe cooling

Skip if

• You use a consumer desktop socket
• You need passive cooling only
• You require a non-2U form factor

Verdict: Dynatron A26 SP3 Aluminum Heatsink is a specialized solution for AMD EPYC systems. It fits users who need active cooling in a 2U server chassis.

7 Best budget

Easycargo 20-Piece Copper and Aluminum Heatsink Kit

Best for: Raspberry Pi 5 passive cooling

Material

Aluminum + Copper

Compatible Device

Raspberry Pi 5 4 3 boards

Mounting Type

Pre-applied adhesive tape backing

Features

Thermal Tape

Dimensions

0.55 × 0.55 × 0.28 inches

Weight

0.64 ounces

View on Amazon: Easycargo 20-Piece Copper and Aluminum Heatsink Kit Affiliate link

This kit includes 20 heatsinks for Raspberry Pi 5, 4, and 3 boards. You get 15 aluminum and 5 copper pads. Each piece has pre-applied thermal adhesive tape. The aluminum pads measure 0.55 by 0.55 inches. The copper pads are 0.55 by 0.55 inches. The total weight is 0.64 ounces. You can use these on other chips like VRAM or MOSFETs. It is a simple passive cooling solution.

Pros

• Includes 20 total heatsinks
• Mix of aluminum and copper materials
• Pre-applied thermal adhesive tape
• Compatible with Pi 5, 4, and 3

Cons

• Passive cooling only, no fan
• Small 0.55 inch pad size
• Adhesive tape may leave residue

Good fit if

• You need passive cooling for a Pi 5
• You want to cool multiple chips at once
• You prefer aluminum and copper mix

Skip if

• You need active fan cooling
• You require large surface area heatsinks
• You want to cool a desktop CPU

Verdict: Easycargo 20pcs Pi Heatsink Kit offers a simple passive cooling solution for Raspberry Pi boards. You should buy it if you need to cool multiple chips on a Pi 5 or 4 without adding a fan.

Specifications side by side

Frequently asked questions

See also

• vevor heat press alternatives
• ez heat 1 alternatives