Awxlumv 50x50x20mm Aluminum Heatsink 4-Pack Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This awxlumv 4pcs 50mm aluminum heatsink review looks at a passive cooling solution for small components. The kit includes four identical units, each measuring 50mm by 50mm by 20mm. They are built from 6063-T5 anodized aluminum, which provides a durable surface that resists scratches and bending. The design features fourteen fins and a flat base plate to maximize surface area for heat dissipation. You get a total weight of 15 ounces across the pack. This setup is ideal for electronics that need reliable, fanless thermal management without adding moving parts to your build.
What stands out
- Constructed from 6063-T5 anodized aluminum for better thermal conductivity and durability.
- Compact dimensions of 50mm x 50mm x 20mm fit tight spaces.
- Includes four heatsinks for multi-component cooling needs.
- Features fourteen fins and a thick base plate for efficient passive cooling.
Who it fits
Good fit for
You should consider this kit if you are cooling power transistors, FETs, ICs, or voltage regulators in a confined space. It is well-suited for passive cooling applications in 3D printers, specifically for NEMA 17 stepper motors. The size also works for TEC1-12706 or TEC1-12710 thermoelectric coolers. If you need simple, fanless heat dissipation for routers or LED chipsets, these units provide a straightforward solution. The four-pack allows you to cover multiple components simultaneously without complex mounting hardware.
Who should skip it
You should look elsewhere if you require active cooling with fans, as these are strictly passive aluminum blocks. They are not designed for high-TDP modern CPUs or GPUs that generate significant heat under load. The 20mm height may be too short for some large processors needing deep fin stacks. If you need adjustable fan speeds or digital monitoring, this kit does not offer those features. It is best for low-to-medium heat output components rather than high-performance computing tasks.
Verdict: This pack offers a practical, passive cooling option for low-to-medium heat components. The durable aluminum construction and compact size make it a solid choice for specialized electronics cooling.
Key specs for this heatsink
Material: 6063-T5 aluminum anodized
This alloy offers good thermal conductivity for passive cooling. The anodized layer adds durability and scratch resistance, which helps maintain surface integrity during installation. Unlike bare aluminum, this finish prevents oxidation over time. You get reliable heat transfer without the risk of corrosion, making it suitable for enclosed electronic enclosures where maintenance is difficult.
Dimensions: 50mm x 50mm x 20mm
These compact measurements define the footprint and height of the cooler. The 20mm height allows it to fit in tight spaces where larger air coolers cannot go. You should measure your available clearance carefully before buying. This size is ideal for small components like VRMs or chipsets, rather than main processors that require massive cooling surfaces.
Cooling Method: Passive
This heatsink relies on natural air convection rather than a fan. It has no moving parts, which means zero noise and no power consumption. You will need adequate case airflow to carry heat away. This method suits low-power components that generate minimal heat, offering a silent solution where active cooling is unnecessary or disruptive.
Compatible Device: GPU, CPU, LED Chipset, Router
This list indicates the broad range of small electronic components that fit this form factor. You can use it on voltage regulators, MOSFETs, or stepper motors as well. It is not designed for high-end gaming CPUs that require heavy-duty cooling. Check your component's thermal output to ensure this passive unit can handle the heat load effectively.
Design and build overview
According to the listing, this kit contains four identical aluminum heatsinks. Each unit measures 50mm by 50mm with a height of 20mm. The footprint is 1.97 inches by 1.97 inches, and the thickness is 0.78 inches. The material is 6063-T5 aluminum with an anodized finish. This alloy provides solid thermal conductivity for passive cooling applications. The anodization creates a hard surface that resists scratches and bending. The fins are designed to remain straight during handling and installation. The base plate is described as flat with sufficient thickness. This construction ensures stable contact with heat-generating components.
Each heatsink weighs 15 ounces, which totals 61 grams per unit. This mass helps absorb and dissipate heat over time. The passive design requires no fans or power connections. You must mount it directly onto the heat source using thermal adhesive or clips. The listing notes compatibility with GPUs, CPUs, LED chipsets, and routers. It also lists power transistors, MOSFETs, and voltage regulators. The compact size makes it suitable for tight spaces inside computer cases or on small circuit boards. The durable finish protects the metal from corrosion in various environments. You can use these for water cooling modules or stepper motors. The build quality focuses on longevity and consistent heat transfer without moving parts.
Setup and everyday use
Installation requires you to mount the heatsink directly onto the heat source. The listing notes a flat base plate with sufficient thickness. This design helps ensure stable contact with components like GPUs, CPUs, or LED chipsets. You will need to secure the unit using standard mounting hardware. The 50mm by 50mm footprint fits many small electronic parts. The 20mm height allows for airflow around the fins without blocking nearby components. Each unit weighs 15 ounces. This weight provides stability during operation. The 6063-T5 aluminum material conducts heat away from the device passively. You do not need fans or power cables for this cooling method. The anodized surface resists scratches and bending. This durability matters if you handle the heatsinks frequently during setup. The kit includes four units. You can use them for multiple components or spare replacements. Common applications include power transistors, FETs, and voltage regulators. It also suits 3D printer stepper motors and thermoelectric coolers. Daily use involves relying on natural convection. Air moves across the fins to dissipate heat. The 14 fins per unit increase surface area for better cooling efficiency. You should ensure the surrounding area has adequate ventilation. This passive solution works well in enclosed spaces where fans create noise. The robust construction means you can install it once and leave it. No software or configuration is required. You simply attach it and let the aluminum do the work. The simple design reduces potential points of failure. This makes it a low-maintenance option for hobbyists and technicians who need reliable passive cooling for various electronic devices.
Before you buy this kit
You need thermal paste to use this heatsink. The listing does not include it. You must buy it separately. Ensure your component fits the 50mm by 50mm base. This size suits small chips, not large processors. You should check the height clearance in your case. The 20mm height is low, but you must verify space. This unit is for passive cooling only. It has no fan. It works best with low heat output devices. You might pair it with thermal tape for easier mounting. This kit is a budget option for specific components. It does not replace high-end air coolers for main CPUs. Use it for auxiliary chips like voltage regulators or LED drivers. Clean the base with isopropyl alcohol before applying paste. Dust can accumulate on the fins. Wipe them occasionally. This product fits alongside other passive solutions in our guide. It is not for heavy gaming rigs.
Check before you buy
- Verify component size matches the 50mm by 50mm base.
- Buy thermal paste separately as it is not included.
- Confirm 20mm height fits your case or enclosure.
- Ensure the heat source is suitable for passive cooling.
The product at a glance
Awxlumv 50x50x20mm Aluminum Heatsink 4-Pack
Best for: passive cooling of low-power electronics
- Material
- 6063-T5 aluminum anodized
- Cooling Method
- Passive
- Compatible Device
- GPU, CPU, LED Chipset, Router
- Dimensions
- 50mm x 50mm x 20mm
View on Amazon: Awxlumv 50x50x20mm Aluminum Heatsink 4-Pack Affiliate link
This kit includes four 50x50x20mm passive aluminum heatsinks designed for passive cooling. Each unit weighs 61 grams and features 14 fins made from 6063-T5 anodized aluminum. The flat base plate provides surface area for components like GPUs, CPUs, and MOSFETs. You get a pack of four for multiple cooling needs. The anodized finish resists scratches and bending. It is a practical option for general electronic heat dissipation.
Pros
- Includes 4 heatsinks for multiple components
- 6063-T5 anodized aluminum for durability
- 14 fins per unit for surface area
- 61-gram weight per unit
Cons
- Passive cooling only, no fan included
- Small 50x50mm footprint limits high-TDP use
- No thermal paste included in data
Good fit if
- You need passive cooling for low-power chips
- You require multiple heatsinks for a project
- You want durable anodized aluminum fins
Skip if
- You need active cooling with a fan
- You are cooling a high-TDP CPU
- You require a larger heatsink base
Verdict: Awxlumv 50x50x20mm Aluminum Heatsink 4-Pack is a solid choice for passive cooling of low-power electronics. It suits builders who need multiple small heatsinks for components like MOSFETs or chipsets. The anodized finish adds durability for general use.
Specifications side by side
| Spec | Awxlumv 50x50x20mm Aluminum Heatsink 4-Pack |
|---|---|
| Material | 6063-T5 aluminum anodized |
| Cooling Method | Passive |
| Compatible Device | GPU, CPU, LED Chipset, Router |
| Dimensions | 50mm x 50mm x 20mm |
| Size | 4 Pcs |
| Model | 20-40mm |
Frequently asked questions
What is the exact size of each heatsink in the pack?
Each unit measures 50mm by 50mm with a height of 20mm. The listing specifies the dimensions as 1.97 inches by 1.97 inches in width and length, with a height of 0.79 inches. This compact footprint makes it suitable for small components that require passive cooling without taking up much space on a motherboard or circuit board.
Is thermal paste included with the Awxlumv heatsink kit?
No, thermal paste is not included. You must purchase it separately to ensure proper heat transfer between the heatsink base and your electronic component. The product data does not list any included accessories. Applying a thin layer of paste is essential for efficient cooling performance on components like GPUs or MOSFETs.
What material are these 50mm heatsinks made from?
They are constructed from 6063-T5 aluminum. This alloy provides reliable thermal conductivity for passive cooling applications. The material also features an anodized finish, which adds durability and resistance to scratches. This surface treatment helps prevent oxidation over time, maintaining the heatsink's integrity during general use and installation.
Can I use these heatsinks for CPU cooling?
These are designed for passive cooling of low-power electronics. While the listing mentions compatibility with GPUs, they are generally suited for small chips rather than large, high-heat processors. You should verify that your component fits the 50mm by 50mm base. They work best for components like chipsets or MOSFETs that generate minimal heat.
How many heatsinks come in this Awxlumv package?
The package contains four identical units. This count is specified in the product size attribute as a 4-pack. Having multiple units allows you to cool several components simultaneously. You can distribute them across different areas of a build, such as cooling multiple voltage regulators or small integrated circuits.
Does the anodized finish affect heat dissipation?
The anodized layer primarily adds durability and scratch resistance. It helps maintain surface integrity during installation and prevents oxidation. While anodizing can slightly reduce thermal conductivity compared to bare aluminum, the 6063-T5 alloy core still provides good heat transfer. The finish ensures the heatsink remains functional and visually consistent over time.
What is the thickness of the heatsink base?
The listing notes a flat base plate with sufficient thickness to ensure stable contact with components. The overall height is 0.79 inches, but the base thickness is not explicitly detailed in the provided specs. A flat base is critical for maximizing surface area contact with your heat source for efficient passive cooling.
Are these heatsinks compatible with standard mounting methods?
You will need to secure the heatsink directly onto the heat source using your own mounting hardware. The listing does not specify included screws or clips. Ensure your component fits the 50mm by 50mm footprint. Standard thermal adhesive or screws are typically used to attach these passive units to small electronic components.