Looking Beyond the Awxlumv 60x40x11mm Aluminum Heatsinks (2-Pack)? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Awxlumv 60x40x11mm Aluminum Heatsinks (2-Pack) offers reliable passive cooling for low-heat components like VRMs and LEDs. If you are searching for awxlumv 2pcs black aluminum heat alternatives, you might need a different size or material. This original heatsink uses black anodized aluminum and measures 60 x 40 x 11 mm. It comes with pre-coated thermal tape for easy mounting. While this setup works well for many small electronics, you may require a larger surface area or a different height. Some users prefer a thicker block for better heat dissipation, while others need a thinner profile for tight spaces. The alternatives listed here were chosen because their specifications overlap with the original product. Each option provides passive cooling through aluminum construction and adhesive backing. You can compare dimensions, weight, and compatible devices to find the best fit for your specific project. Whether you need to cool stepper motors, FPV transmitters, or power ICs, these options cover various thermal management needs. The list includes variations in size and quantity to suit different installation requirements. You can review the specs to ensure the heatsink fits your physical constraints and thermal demands.
Comparing Awxlumv Alternatives
Awxlumv 40x40x20mm Aluminum Heatsink
The Awxlumv 40x40x20mm heatsink doubles the height of the original 11mm model to 20mm. This extra mass increases surface area for better passive heat dissipation. You get the same black aluminum material and pre-coated thermal tape for easy mounting. The footprint shrinks to 40x40mm, making it ideal for tight spaces like 3D printer stepper motors or power ICs. If you need more thermal capacity than the 60x40x11mm can provide, this taller option is a practical upgrade for small electronics.
Awxlumv 35x35x10mm Black Aluminum Heatsink
This 35x35x10mm heatsink is significantly smaller and thinner than the original 60x40x11mm model. It offers a compact footprint for very tight spaces, such as small ICs or LEDs. The height drops to 10mm, which may reduce cooling efficiency compared to the taller original. It retains the black aluminum construction and adhesive backing for simple installation. Choose this alternative if space is your primary constraint and your component generates minimal heat, rather than needing the larger surface area of the 60mm model.
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
The ZZHXSM 80mm heatsink matches the original height of 11mm but extends the length to 80mm. This provides a larger surface area for passive cooling without increasing the profile. It uses black aluminum and includes thermal tape for secure mounting. The weight is slightly lower at 1.26 ounces for the pack. It is best for users who need more cooling surface for LEDs or FPV transmitters than the 60mm model offers, while keeping the same low-profile design and adhesive installation method.
SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink
The SGTKJSJS 150x74x10mm heatsink is a massive alternative, offering a much larger surface area for high-heat power components. It is significantly heavier and wider than the original. The height is 10mm, similar to the original. It uses black aluminum and thermal tape for mounting. This option is for users needing to cool MOSFETs or large ICs that the small 60x40x11mm cannot handle. It sacrifices compactness for substantial passive cooling capacity in larger electronic assemblies.
Awxlumv 100x45x5mm Thin Aluminum Heatsink
This Awxlumv 100x45x5mm heatsink is extremely thin at 5mm, half the height of the original. It provides a long, flat surface for low-power LEDs or FPV gear. The width is 45mm, slightly wider than the original. It uses black aluminum and adhesive tape. It is not suitable for high-heat processors. Pick this if you need a very low-profile solution for small electronics where the 11mm height of the original would not fit, accepting lower thermal capacity for the reduced size.
Awxlumv 4PCS 40mm Aluminum Heatsink
This pack includes four 40x40x20mm heatsinks, offering more units than the original two-pack. Each unit is taller at 20mm, providing more surface area per piece. They use black aluminum and thermal tape for mounting. This is ideal for cooling multiple small components like 3D printer motors or VRMs simultaneously. If you need to cool several devices at once, this multi-pack offers better value and coverage than buying two of the original 60mm models, though each individual unit is smaller.
Quick picks
Our 7 picks
Awxlumv 60x40x11mm Aluminum Heatsinks (2-Pack)
Best for: passive cooling of small electronics
- Material
- Black anodized aluminum
- Cooling Method
- Passive
- Compatible Device
- VRM, CPU, LED, stepper motors
- Dimensions
- 60 x 40 x 11 mm
- Mounting Type
- Pre-coated thermal tape backing
- Weight
- 1.84 ounces
View on Amazon: Awxlumv 60x40x11mm Aluminum Heatsinks (2-Pack) Affiliate link
You get two black anodized aluminum heatsinks measuring 60 by 40 by 11 mm. Each unit weighs 0.92 oz and uses pre-coated thermal tape for mounting. This passive cooling solution maximizes surface area for air contact. It fits VRMs, CPUs, LEDs, and stepper motors like NEMA 17. The adhesive backing simplifies installation without additional hardware.
Pros
- Black anodized aluminum material for durability
- Pre-coated thermal tape backing for easy mounting
- Dimensions of 60 x 40 x 11 mm
- Passive cooling method requires no power
- Includes two units per package
Cons
- Passive cooling only, no fan included
- Adhesive mounting limits repositioning
- Small surface area compared to large CPU coolers
Good fit if
- You need passive cooling for small components
- You want easy adhesive installation
- You are cooling VRMs or stepper motors
Skip if
- You require active fan cooling
- You need to cool high-TDP CPUs
- You prefer screw-mounting hardware
Verdict: Awxlumv 60x40x11mm Black Aluminum Heatsink is a practical passive cooling option for low-heat components like VRMs and LEDs. You should buy it if you need simple adhesive mounting for small electronics.
Awxlumv 40x40x20mm Aluminum Heatsink
Best for: cooling multiple small components like VRMs or motors
- Material
- Aluminum alloy
- Dimensions
- 1.57 x 1.57 x 0.79 inches
- Mounting Type
- Thermal Conductive Adhesive Tape
- Color
- Black
- Compatible Device
- GPU, VRM, 3D Printer
- Weight
- 3.76 ounces
View on Amazon: Awxlumv 40x40x20mm Aluminum Heatsink Affiliate link
This kit includes four 40x40x20mm aluminum heatsinks designed for efficient heat dissipation. The anodized black finish helps manage temperatures for components like GPU VRMs, 3D printer motors, and power ICs. Pre-applied thermal adhesive tape simplifies installation by removing the need for cutting or additional mounting hardware. The 20mm height provides a larger surface area compared to thinner alternatives, making it suitable for enclosed or overclocked environments where steady cooling is required.
Pros
- 20mm height offers more surface area than standard 10mm sinks
- Pre-applied thermal adhesive tape for easy, tool-free installation
- Anodized aluminum alloy construction for reliable heat dissipation
- Includes four units for multiple component cooling needs
Cons
- 20mm thickness may not fit in very tight spaces
- Adhesive backing limits repositioning during installation
- No fan mounting holes for active cooling integration
Good fit if
- You need to cool multiple components like VRMs or motors
- You prefer a thicker sink for better passive cooling
- You want a simple install with pre-applied adhesive
Skip if
- You have extremely limited vertical clearance
- You require active cooling with fan mounts
- You need to reposition the sink after application
Verdict: Awxlumv 40x40x20mm Aluminum Heatsink is a practical solution for users needing passive cooling for multiple components like 3D printer motors or power ICs. The extra height and included adhesive make it ideal for straightforward, multi-point thermal management tasks.
Awxlumv 35x35x10mm Black Aluminum Heatsink
Best for: cooling small ICs and LEDs in tight spaces
- Material
- anodized aluminum
- Dimensions
- 35mm x 35mm x 10mm
- Mounting Type
- Pre-applied thermal conductive tape
- Color
- Black
- Weight
- 0.35 ounces
View on Amazon: Awxlumv 35x35x10mm Black Aluminum Heatsink Affiliate link
This is a 35x35x10mm anodized aluminum heatsink designed for small electronic components. It weighs 0.35 ounces per unit and comes with pre-applied thermal conductive adhesive tape. The black finish helps with heat dissipation for ICs, LEDs, and power regulators. You get five pieces in the pack. It is a compact solution for tight spaces where standard mounting options do not fit.
Pros
- Compact 35x35x10mm dimensions fit small components
- Pre-applied thermal tape simplifies installation
- Anodized aluminum construction aids heat transfer
- Includes five units for multiple applications
Cons
- Small 35mm footprint limits cooling capacity
- 10mm height restricts airflow in dense builds
- Adhesive tape may not suit all surfaces
Good fit if
- You need to cool small ICs or LEDs
- You have limited space around the component
- You want a quick adhesive installation
Skip if
- You are cooling a high-power CPU
- You prefer screw-mounting for stability
- You need a larger surface area
Verdict: Awxlumv 35x35x10mm Black Aluminum Heatsink is a practical option for low-heat components in tight spaces. It suits users who need a simple adhesive fix for small chips rather than heavy-duty processor cooling.
ZZHXSM 80mm Black Aluminum Heatsink 2-Pack
Best for: passive cooling of LEDs and FPV transmitters
- Material
- Black anodized aluminum
- Cooling Method
- Passive
- Compatible Device
- 3D printers, LEDs, FPV transmitters
- Dimensions
- 80 x 40 x 11mm
- Mounting Type
- Thermal conductive adhesive tape
- Weight
- 1.26 ounces
View on Amazon: ZZHXSM 80mm Black Aluminum Heatsink 2-Pack Affiliate link
This pack includes two black anodized aluminum heatsinks measuring 80 x 40 x 11mm. Each unit weighs 36g and features a pre-coated thermal conductive adhesive tape for mounting. The design maximizes surface area for passive cooling. You can use these for 3D printers, LEDs, and FPV transmitters. The 11mm height provides a moderate profile for small components.
Pros
- 80 x 40 x 11mm dimensions
- Black anodized aluminum construction
- Pre-applied thermal conductive adhesive tape
- Lightweight at 36g per unit
Cons
- Passive cooling only, no fan support
- Adhesive mounting limits repositioning
- Limited to small component heat dissipation
Good fit if
- You need passive cooling for FPV transmitters
- You are cooling LEDs on a 3D printer
- You require a compact 80mm long heatsink
Skip if
- You need active fan cooling
- You require screw or clip mounting
- You are cooling high-power CPUs
Verdict: ZZHXSM 80x40x11mm Black Aluminum Heatsink fits users who need simple passive cooling for small electronics like LEDs or FPV gear. The included adhesive tape makes installation quick for fixed mounts.
SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink
Best for: Large passive cooling for power components
- Material
- Aluminum
- Dimensions
- 5.9 x 2.91 x 0.39 inch
- Mounting Type
- Thermal Conductive Adhesive Tape
- Color
- Black
- Weight
- 10.7 ounces
View on Amazon: SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink Affiliate link
This SGTKJSJS heatsink measures 150 x 74 x 10 mm. It uses black anodized aluminum fins to maximize surface area. The base includes pre-coated thermal tape for easy installation. You get two units per package. Each piece weighs 125 grams. This size suits larger power components like MOSFETs or voltage regulators on motherboards.
Pros
- Generous 150 x 74 mm base area for heat dissipation
- Pre-applied thermal adhesive tape simplifies mounting
- Black anodized finish for corrosion resistance
- Includes two units in one package
Cons
- 10 mm thickness is thin for high-TDP components
- Fixed thermal tape limits repositioning options
- No fan mounting holes for active cooling
Good fit if
- You need passive cooling for power transistors
- You want a large surface area for voltage regulators
- You prefer pre-applied adhesive for quick installation
Skip if
- You require active cooling with fan mounts
- You need thick fins for extreme heat loads
- You want adjustable thermal adhesive placement
Verdict: SGTKJSJS 150x74x10mm Black Aluminum Heatsink offers a large passive cooling surface for power electronics. It fits users needing reliable heat dissipation for MOSFETs or ICs without active fans.
Awxlumv 100x45x5mm Thin Aluminum Heatsink
Best for: Low-power LEDs and FPV transmitters
- Material
- Aluminum
- Cooling Method
- Passive
- Dimensions
- 100 x 45 x 5mm
- Mounting Type
- Pre-coated thermal tape
- Color
- Black
- Weight
- 3.2 ounces
View on Amazon: Awxlumv 100x45x5mm Thin Aluminum Heatsink Affiliate link
This is a pair of 100 x 45 x 5mm aluminum heatsinks. They use passive cooling with pre-coated thermal adhesive tape. The black anodized fins maximize surface area for air contact. Each unit weighs 44 grams. This setup suits small components like LEDs, FPV transmitters, or 3D printer parts. It offers a low-profile solution for tight spaces where active fans do not fit.
Pros
- Thin 5mm height fits tight spaces
- Pre-coated thermal adhesive tape for easy mounting
- Black anodized aluminum for passive cooling
- Pack includes 2 units
Cons
- Only 5mm thickness limits heat dissipation capacity
- Passive cooling only, no fan included
- Adhesive tape may not suit all surfaces
Good fit if
- You need passive cooling for small components
- You have limited vertical space for a heatsink
- You are cooling LEDs or FPV transmitters
Skip if
- You require active cooling with a fan
- You need to cool high-wattage CPUs
- You prefer screw-mounted heatsinks over adhesive
Verdict: Awxlumv 100x45x5mm Thin Aluminum Heatsink is a compact passive cooling option for low-power electronics. It fits well in tight spaces for LEDs or FPV gear. It is not suitable for high-heat processors.
Awxlumv 4PCS 40mm Aluminum Heatsink
Best for: 3D printer motors and small VRMs
- Material
- Extruded Anodized Aluminum 6063-T5
- Compatible Device
- VRM, GPU, Stepper Driver, 3D Printer
- Dimensions
- 40 x 40 x 20mm
- Mounting Type
- Thermal Conductive Adhesive Tape
- Weight
- 5.29 ounces
View on Amazon: Awxlumv 4PCS 40mm Aluminum Heatsink Affiliate link
This 40 x 40 x 20mm extruded anodized aluminum 6063-T5 heatsink uses pre-applied thermal conductive adhesive tape for tool-free installation. The compact 40mm square footprint and 20mm height provide surface area for dissipating heat from small components. It suits 3D printer stepper motors, VRMs, and GPU modules where space is tight but steady cooling is needed.
Pros
- 20mm height maximizes surface area for a 40mm base
- Pre-applied thermal adhesive tape allows tool-free mounting
- Extruded anodized aluminum 6063-T5 ensures durability and conductivity
Cons
- 40mm base size is too small for modern high-TDP CPUs
- Adhesive mounting limits repositioning and reuse
- No fan included for active cooling
Good fit if
- You need to cool a 3D printer NEMA17 stepper motor
- You are upgrading VRM or GPU power modules
- You want a quick, tool-free installation on flat surfaces
Skip if
- You are cooling a standard desktop CPU
- You need to remove and reapply the heatsink later
- You require active airflow from a fan
Verdict: Awxlumv 40mm 20mm Aluminum Heatsink is a solid passive cooling solution for small electronics like 3D printer motors and power modules. It fits well in tight spaces where adhesive mounting is preferred over screws.
Specifications side by side
| Spec | Awxlumv 60x40x11mm Aluminum Heatsinks (2-Pack) | Awxlumv 40x40x20mm Aluminum Heatsink | Awxlumv 35x35x10mm Black Aluminum Heatsink | ZZHXSM 80mm Black Aluminum Heatsink 2-Pack | SGTKJSJS 5.9 x 2.91 Black Aluminum Heatsink | Awxlumv 100x45x5mm Thin Aluminum Heatsink | Awxlumv 4PCS 40mm Aluminum Heatsink |
|---|---|---|---|---|---|---|---|
| Material | Black anodized aluminum | Aluminum alloy | anodized aluminum | Black anodized aluminum | Aluminum | Aluminum | Extruded Anodized Aluminum 6063-T5 |
| Cooling Method | Passive | not stated | not stated | Passive | not stated | Passive | not stated |
| Compatible Device | VRM, CPU, LED, stepper motors | not stated | not stated | 3D printers, LEDs, FPV transmitters | not stated | not stated | VRM, GPU, Stepper Driver, 3D Printer |
| Dimensions | 60 x 40 x 11 mm | 1.57 x 1.57 x 0.79 inches | 35mm x 35mm x 10mm | 80 x 40 x 11mm | 5.9 x 2.91 x 0.39 inch | 100 x 45 x 5mm | 40 x 40 x 20mm |
| Mounting Type | Pre-coated thermal tape backing | Thermal Conductive Adhesive Tape | Pre-applied thermal conductive tape | Thermal conductive adhesive tape | Thermal Conductive Adhesive Tape | Pre-coated thermal tape | Thermal Conductive Adhesive Tape |
| Color | Black | Black | Black | Black | Black | Black | not stated |
| Features | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape | Thermal Tape |
| Weight | 1.84 ounces | 3.76 ounces | 0.35 ounces | 1.26 ounces | 10.7 ounces | 3.2 ounces | 5.29 ounces |
| Model | 60x40x11mm | 40x40x20 mm | 35x35x10 mm | AHEATS-80x40x11-2 | 2DSRP-1571 | 100 x 45 x 5mm Heatsink | 40mm Heatsink |
If you need larger metal enclosures, you can compare aikosin 30 inch aluminum black alternatives for different equipment dimensions.
Frequently asked questions
What is the largest Awxlumv heatsink in this list?
The SGTKJSJS 150x74x10mm Black Aluminum Heatsink is the largest option. It measures 5.9 inches in length and 2.91 inches in width. This model provides a substantial passive cooling surface for power components. It is ideal for MOSFETs or ICs that require reliable heat dissipation without active fans.
Which heatsink is best for 3D printer motors?
The Awxlumv 40x40x20mm Aluminum Heatsink is a practical solution for cooling multiple small components like 3D printer motors. Its extra height and included adhesive make it suitable for straightforward thermal management. You can also use the 4PCS 40mm Aluminum Heatsink for similar applications in tight spaces.
Do all these heatsinks come with thermal tape?
Yes, every listed heatsink includes thermal tape for mounting. This feature simplifies installation by allowing you to stick the heatsink directly to components. You do not need to purchase separate adhesive or worry about complex mechanical fasteners. The tape ensures a secure connection for passive cooling tasks.
Is there a thin heatsink for tight spaces?
The Awxlumv 100x45x5mm Thin Aluminum Heatsink is designed for low-power electronics in compact areas. It measures only 5mm in height, making it suitable for LEDs or FPV transmitters. This model is not intended for high-heat processors but works well where space is extremely limited.
Which option is best for VRMs?
The Awxlumv 60x40x11mm Black Aluminum Heatsink is a practical passive cooling option for low-heat components like VRMs. It features simple adhesive mounting for small electronics. You can also consider the 40x40x20mm model if you need more surface area for power ICs or similar modules.
What is the lightest heatsink on the list?
The Awxlumv 35x35x10mm Black Aluminum Heatsink is the lightest option at 0.35 ounces. It is a practical choice for cooling small ICs and LEDs in tight spaces. This compact size suits users who need a simple adhesive fix for small chips rather than heavy-duty processor cooling.
Are there heatsinks suitable for FPV gear?
Yes, the ZZHXSM 80mm Black Aluminum Heatsink fits users who need passive cooling for small electronics like FPV transmitters. The included adhesive tape makes installation quick for fixed mounts. The Awxlumv 100x45x5mm model is also suitable for low-power FPV gear in compact setups.