Awxlumv 60mm Square Aluminum Heatsink Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This awxlumv 2pcs aluminum heat sink review covers a compact passive cooling solution for small electronics. The set includes two square modules measuring 60 by 60 by 15 mm. They are made from anodized aluminum, which helps dissipate heat without moving parts. Each unit comes with pre-applied 3M 8810 thermal conductive adhesive tape for easy installation. This design targets low-power components like SSDs, chips, and IC circuit boards. You get a straightforward, no-fuss approach to managing thermal output in tight spaces. The lightweight construction adds minimal bulk to your build.
What stands out
- Compact 60 x 60 x 15 mm dimensions fit tight spaces
- Pre-applied 3M 8810 thermal tape simplifies mounting
- Anodized aluminum material aids passive heat dissipation
- Set includes two identical units for multiple components
Who it fits
Good fit for
You should consider this heatsink if you are cooling low-power electronics like M.2 SSDs, LED panels, or small IC circuit boards. The passive design works well for devices that do not generate significant heat. The pre-applied tape makes it ideal for quick retrofits on motherboards or power amplifiers. If you need a silent, vibration-free solution for a WiFi router or set-top box, this compact size is practical. It suits builders who prioritize simplicity and direct contact cooling over active fan-based systems.
Who should skip it
You should look elsewhere if you need to cool a high-performance desktop CPU or a gaming GPU. This 15 mm thick aluminum block lacks the mass and surface area for high-TDP processors. It also has no fan, so it cannot handle sustained heavy loads. If your device requires active airflow or a larger contact area, this passive module will not suffice. It is strictly for low-power components where heat generation is minimal and space is limited.
Verdict: This is a practical passive cooling option for low-power electronics like SSDs and small chips. It offers easy installation via pre-applied tape and a compact footprint.
Key specs explained
Material: Anodized aluminum
Anodized aluminum is a durable metal that spreads heat away from components. This process creates a protective surface layer that resists corrosion and wear. You get reliable thermal conductivity without the risk of short circuits. This material choice suits small electronics that need steady passive cooling. It is a practical alternative to copper for compact projects where weight matters.
Dimensions: 60 x 60 x 15 mm
These square modules measure 60 by 60 by 15 millimeters. The compact footprint allows installation in tight spaces where larger coolers cannot fit. The 15 mm height provides enough surface area for basic heat dissipation. You can mount these on small chips or SSDs without obstructing nearby parts. This size is ideal for miniaturized devices that require discreet thermal management solutions.
Mounting Type: Pre-applied 3M 8810 thermal tape
The heatsink includes pre-applied 3M 8810 thermal adhesive tape. This eliminates the need for screws or clips during installation. You simply peel the backing and stick the unit to the heat source. The tape ensures consistent thermal contact for efficient heat transfer. This method is best for static components where vibration is minimal and permanent bonding is acceptable.
Cooling Method: Passive
Passive cooling relies on natural air movement rather than fans. This design operates silently with zero noise output. You avoid the mechanical failure points associated with moving parts. The heatsink dissipates heat through its large surface area into the surrounding air. This approach is suitable for low-heat electronics or environments where silence and reliability are priorities.
Design and Build Quality
The listing specifies these heatsinks are made from anodized aluminum. This material choice provides a durable surface that resists corrosion. The black tone finish is cosmetic but also helps with heat dissipation. According to the listing, the anodization process adds a protective layer. This reduces the risk of hardware failure from overheating. You get reliable thermal conductivity without the risk of short circuits. The passive cooling method means there are no moving parts. This ensures silent operation for sensitive electronics.
Each unit measures 60 by 60 by 15 mm. The listing also provides imperial dimensions of 2.4 by 2.4 by 0.59 inches. This compact square footprint allows installation in tight spaces. The weight is listed at 3.2 ounces for the set. This light weight makes mounting easy on various surfaces. The pre-applied 3M 8810 thermal conductive double-sided adhesive tape simplifies installation. You do not need separate mounting hardware or screws. The tape provides a secure bond while transferring heat effectively.
These dimensions and the adhesive backing make this unit suitable for passive cooling. It fits well on SSDs, LED panels, and IC circuit boards. The small size is ideal for WiFi routers, set-top boxes, and power amplifiers. You can place it directly on the component needing cooling. The design prioritizes simplicity and direct contact. No fans or complex brackets are involved. This straightforward build is practical for DIY projects or small electronics upgrades.
Setup and everyday use guide
Installing this heatsink relies on its pre-applied 3M 8810 thermal conductive adhesive tape. You do not need screws, clips, or additional thermal paste. The setup is straightforward. You peel the protective layer from the tape and press the unit firmly onto your target component. The 60 by 60 by 15 mm footprint requires a flat surface for proper contact. Any gaps reduce thermal transfer efficiency. The compact dimensions make it suitable for tight spaces where larger coolers cannot fit. This passive cooling method works without fans or power cables. It relies entirely on the anodized aluminum to dissipate heat into the surrounding air. You can apply it to SSDs, CPU chips, IC circuit boards, and MOS tubes. The listing notes it is also compatible with LED panels and power amplifier transistors. Because it is passive, there is no noise generated during operation. This makes it ideal for environments where silence is important. The black tone finish is cosmetic but aids in radiation. You should ensure the component generates heat that the aluminum surface can handle. The 3.2 ounce weight per unit is light, but the adhesive bond must be secure. Daily use involves leaving the heatsink in place. It continuously draws heat away from the electronics. This reduces the risk of hardware failure due to overheating. You do not need to maintain or clean the unit regularly. Just check that the adhesive remains intact. This solution is best for low-to-medium heat loads where active cooling is unnecessary or impractical.
Before You Buy This Heatsink
This compact passive heatsink is designed for specific low-heat components. It is not a replacement for the large CPU air coolers featured elsewhere on this page. You should only consider it for small chips, SSDs, or LED panels that generate minimal thermal output. The listing states it includes pre-applied 3M 8810 thermal tape. You must ensure your target component has a flat surface. Rough or uneven textures will prevent proper contact. The adhesive is permanent. You cannot reposition the unit once attached. Check the dimensions carefully. The 60 by 60 by 15 mm size fits many small devices, but not all. You need adequate airflow around the aluminum fins. Passive cooling relies on ambient air movement. If your enclosure is sealed, this heatsink may not perform well. It is a simple, low-maintenance solution for niche applications. It requires no fan noise or power draw. Just verify your component’s heat output matches this small surface area.
Check before you buy
- Verify your component has a flat mounting surface.
- Confirm the 60x60x15mm size fits your device space.
- Ensure your enclosure allows airflow around the fins.
- Check that the component heat output is low enough.
The product at a glance
Awxlumv 60mm Square Aluminum Heatsink 2-Pack
Best for: Low-power passive cooling of small chips
- Material
- Anodized aluminum
- Cooling Method
- Passive
- Compatible Device
- SSD, CPU, chip, IC circuit board
- Dimensions
- 60 x 60 x 15 mm
- Mounting Type
- Pre-applied 3M 8810 thermal tape
- Weight
- 3.2 ounces
View on Amazon: Awxlumv 60mm Square Aluminum Heatsink 2-Pack Affiliate link
This is a set of two 60x60x15mm passive aluminum heatsinks. They use pre-applied 3M 8810 thermal adhesive tape for mounting. The anodized black aluminum surface helps dissipate heat from small components. You can use them for SSDs, CPUs, or IC circuit boards. This compact size suits tight spaces where airflow is limited. It is a straightforward passive cooling solution for electronics.
Pros
- 60 x 60 x 15 mm square aluminum design
- Pre-applied 3M 8810 thermal conductive adhesive tape
- Anodized aluminum material for durability
- Includes two heatsinks per pack
Cons
- Passive cooling only, no fan included
- Small 15 mm height limits heat dissipation
- Adhesive mounting may not suit all surfaces
Good fit if
- You need passive cooling for small chips
- You have limited space for a 60mm square
- You want a simple adhesive mounting solution
Skip if
- You require active cooling with a fan
- You need to cool high-power CPUs
- You prefer screw-mounted heatsinks
Verdict: Awxlumv 60mm Aluminum Heatsink is a basic passive cooling option for low-heat components. It fits well if you need a small, adhesive-backed solution for SSDs or ICs.
Specifications side by side
| Spec | Awxlumv 60mm Square Aluminum Heatsink 2-Pack |
|---|---|
| Material | Anodized aluminum |
| Cooling Method | Passive |
| Compatible Device | SSD, CPU, chip, IC circuit board |
| Dimensions | 60 x 60 x 15 mm |
| Mounting Type | Pre-applied 3M 8810 thermal tape |
| Features | Thermal Tape |
| Weight | 3.2 ounces |
| Model | 60x60x15mm |
Frequently asked questions
Is this heatsink suitable for a standard desktop CPU?
No, this unit is not designed for standard desktop CPUs. It is a basic passive cooling option for low-heat components like small chips or SSDs. Standard processors generate too much heat for this 60mm square aluminum block to handle effectively. You should look for a larger air cooler for your main processor.
How do I attach the heatsink to the component?
You attach the heatsink using the pre-applied thermal conductive adhesive tape. There is no need to buy separate thermal paste or use screws. Simply peel the protective layer from the tape and press the unit firmly onto the target component. This method provides a secure bond and efficient heat transfer for passive cooling applications.
What are the exact dimensions of the heatsink?
Each heatsink measures 60 by 60 by 15 mm. In imperial units, this equals 2.4 inches in width, 2.4 inches in length, and 0.59 inches in height. These compact dimensions make it suitable for tight spaces where larger cooling solutions will not fit. The small footprint allows it to mount easily on small integrated circuits.
Does the package include one or two heatsinks?
The package includes two heatsinks. You receive a two-pack of the 60mm square aluminum units. This quantity is useful if you need to cool multiple components simultaneously, such as dual SSDs or several ICs. The units are identical in size and material, ensuring consistent performance across all installed modules.
What material is used to build this heatsink?
The heatsink is constructed from anodized aluminum. This material is chosen for its ability to dissipate heat without requiring moving parts. The anodization process creates a durable surface layer that resists corrosion and wear. This ensures the unit remains effective over time while providing reliable thermal conductivity for your electronic components.
What is the weight of a single unit?
A single heatsink weighs 3.2 ounces. This light weight ensures it does not add significant mass to your device. The low profile and minimal weight make it ideal for portable electronics or delicate components that cannot support heavy cooling hardware. The 15mm height keeps the overall profile very low.
Can I use this for a graphics card chip?
You can use this for low-power graphics components, but it is not for the main GPU die. It is best suited for VRAM chips or power delivery modules on a board. These areas generate less heat than the primary processor. Ensure the component surface is flat and clean before applying the adhesive tape for optimal results.