Awxlumv 150mm Aluminum Heatsink 60x150x25mm Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You might be looking for awxlumv 150mm aluminum heatsink 60x150x25mm alternatives because this specific block serves a narrow purpose. The Awxlumv unit is a passive aluminum heatsink measuring 150 by 60 by 25mm. It weighs 147g and features 24 fins. Its data highlights effective heat dissipation for low-power components like LED circuits or IC boards. It is not designed for high-heat desktop CPUs.
You may need a different spec if your project requires active cooling, a different socket compatibility, or a kit for multiple small chips. Some users prefer thermal paste for basic maintenance, while others need server-grade solutions for EPYC processors. The 6 picks in this list were chosen because their published specifications overlap with the original. This includes material types, physical dimensions, and intended cooling methods. We compare these items strictly by their data to help you find the right fit for your specific electronic cooling needs.
How these picks differ
Prolimatech Nano Aluminum Thermal Compound 1.5g
The Prolimatech Nano Thermal Compound is a paste, not a heatsink. It measures 6.3 by 2.76 by 2.56 inches in its packaging. You use it to improve contact between a CPU and a cooler. The Awxlumv block dissipates heat on its own without fans. This paste helps existing coolers work better. Choose this if you need to replace dried thermal compound on a desktop CPU. It does not replace a large aluminum block for passive LED cooling. It is for basic maintenance tasks where ease of application matters most.
Uxcell 100mm Aluminum Heatsink 5-Pack
The Uxcell heatsink comes in a pack of five smaller units. Each block measures 8 by 4.5 by 1.8 inches. It is smaller than the 150mm Awxlumv block. This size fits tight spaces around small transistors or LEDs. You get multiple units for different components. The Awxlumv is a single large piece for high-power modules. Pick the Uxcell option if you need to cool several small parts in a confined area. It does not handle high heat loads like larger blocks. It is practical for distributing cooling across multiple small electronic components.
Dynatron K6 80mm 1U Server Fan
The Dynatron K6 is an active server cooler for 1U chassis. It measures 3.15 by 3.15 by 0.59 inches. It weighs 7.84 ounces. Unlike the passive Awxlumv block, this unit uses a fan for airflow. It supports LGA1151 sockets. The Awxlumv is for passive LED or module cooling. Choose the Dynatron K6 for server builds requiring forced air cooling. It does not work for passive setups or LED lighting. It is designed for compact server environments where socket compatibility and active cooling are priorities over silence.
Walfront 24-Fin Aluminum Heatsink
The Walfront heatsink is another 150mm aluminum block. It weighs 5.64 ounces. The Awxlumv weighs 147g, which is about 5.19 ounces. These weights are nearly identical. Both are passive aluminum heatsinks for LED lighting. The Walfront model is specialized for aquarium or household lighting setups. It suits users who need to dissipate heat from semiconductor devices. It is a direct alternative if you want a similar size and material. The main difference is the specific model design for LED thermal management rather than general IC cooling.
Dynatron 2U Active Aluminum SP3 Heatsink
The Dynatron A26 is an active heatsink for AMD EPYC SP3 servers. It measures 5 by 4.5 by 6 inches. It weighs one pound. It fits only in 2U cases. The Awxlumv is a small passive block for LEDs. This Dynatron unit is for high-end server CPUs. It requires a fan for operation. Choose it for SP3 platforms in server racks. It does not work for desktop PCs or passive cooling. It is a specialized solution for enterprise environments. The size and cooling method are completely different from the small aluminum block.
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
The Easycargo kit contains 20 pieces of copper and aluminum heatsinks. Each piece is 0.55 by 0.55 by 0.28 inches. It weighs 0.64 ounces for the whole kit. It includes thermal tape. The Awxlumv is a single large 150mm block. This kit is for Raspberry Pi components like VRAM and IC chips. It fits users who need passive cooling for multiple small parts. It does not replace a large heatsink for high-power LEDs. It is a convenient kit for single-board computer thermal management with pre-applied adhesive.
Quick picks
Our 7 picks
Awxlumv 150mm Aluminum Heatsink
Best for: Passive cooling for LEDs and modules
- Material
- 6063 Aluminum
- Cooling Method
- Passive
- Compatible Device
- LED, CPU, IC, Motherboard, Transistor
- Dimensions
- 60x150x25mm
- Weight
- 5.19 ounces
View on Amazon: Awxlumv 150mm Aluminum Heatsink Affiliate link
This Awxlumv heatsink is a 150mm long aluminum block designed for passive cooling. It measures 60x150x25mm and weighs 147g. The unit features 24 fins made from 6063 aluminum for strong heat conductivity. You can use it for LED lights, IC circuits, or high-power modules. It provides effective heat dissipation to protect components and prolong device life.
Pros
- 150mm length offers large surface area
- 24 fins increase heat dissipation
- 6063 aluminum ensures strong conductivity
- Lightweight at 147g
Cons
- Passive design requires external airflow
- Limited to low-power components
- No thermal adhesive included
Good fit if
- You need passive cooling for LEDs
- You have space for a 150mm block
- You want aluminum construction
Skip if
- You need active fan cooling
- You require copper material
- You need high-TDP CPU cooling
Verdict: Awxlumv 150mm Aluminum Heatsink fits users who need a large, passive aluminum block for LEDs or low-power electronics. It is not suitable for high-heat CPUs.
Prolimatech Nano Aluminum Thermal Compound 1.5g
Best for: Basic CPU cooling maintenance
- Material
- Aluminum
- Dimensions
- 6.3 × 2.76 × 2.56 inches
View on Amazon: Prolimatech Nano Aluminum Thermal Compound 1.5g Affiliate link
This is a 1.5g syringe of aluminum-based thermal compound. It conducts heat at 10.2 W/m C. The material spreads easily into thin, even layers. It is non-corrosive and electrically non-conductive. You do not need to bake it after application. This paste suits users who want simple, reliable heat transfer without complex setup steps.
Pros
- High thermal conductivity of 10.2 W/m C
- Non-corrosive and electrically non-conductive
- No baking time required after application
- Includes 1.5g syringe with applicator
Cons
- Small 1.5g capacity limits reuse
- Aluminum base may not suit all surfaces
- No detailed viscosity or curing data provided
Good fit if
- You need a simple, no-fuss thermal paste
- You want non-conductive material for safety
- You are replacing dried out compound
Skip if
- You require high-performance synthetic compounds
- You need paste for large server CPUs
- You prefer liquid metal alternatives
Verdict: Prolimatech PK-2 Nano Thermal Compound offers straightforward heat transfer for basic cooling needs. It fits users who prioritize ease of application and electrical safety over extreme performance metrics.
Uxcell 100mm Aluminum Heatsink 5-Pack
Best for: cooling small transistors and LEDs in tight spaces
- Material
- Aluminum
- Compatible Device
- Led Amplifier Transistor IC Module
- Dimensions
- 100x25x10mm
View on Amazon: Uxcell 100mm Aluminum Heatsink 5-Pack Affiliate link
This Uxcell heatsink uses aluminum fins to dissipate heat from electronic components. It measures 4 by 1 by 0.4 inches and weighs 6.1 ounces. The design features eight fins to maximize surface area for better heat transfer. It suits LED amplifiers, transistors, and voltage regulators. You get five units in one package. This compact size fits tight spaces where larger coolers cannot go.
Pros
- Made of high quality aluminum for good thermal conductivity
- Eight fins increase surface area for efficient heat dissipation
- Compact dimensions of 4 by 1 by 0.4 inches
- Includes five heatsinks in a single package
Cons
- Small 100mm length limits use on high-power components
- Passive design requires case airflow to work effectively
- No mounting hardware included in the package
Good fit if
- You need to cool small transistors or ICs
- You have limited space around the heat source
- You want to cool multiple components at once
Skip if
- You need to cool a high-TDP CPU
- You require active fan cooling for high heat loads
- You need a single large heatsink for an amplifier
Verdict: Uxcell 4x1x0.4 In Aluminum Heatsink is a practical option for cooling small electronic components like LEDs or transistors in tight spaces. It does not handle high heat loads.
Dynatron K6 80mm 1U Server Fan
Best for: 1U server builds with LGA1151 sockets
- Socket Compatibility
- LGA1151, LGA1155, LGA1156
- Material
- Aluminum 6061 Skived Fins
- Server Height
- 1U
- Cooling Method
- Active PWM Blower
- Fan Size
- 80 x 80 x 15 mm
- Dimensions
- 3.15 x 3.15 x 0.59 inches
View on Amazon: Dynatron K6 80mm 1U Server Fan Affiliate link
The Dynatron K6 is a low-power CPU cooling solution designed for 1U server chassis. It features an 80x80x15 mm PWM blower fan with skived aluminum fins. The unit operates at 3000 RPM, delivering 9.0 CFM of airflow. It supports Intel LGA1151, LGA1155, and LGA1156 sockets. This compact cooler suits users needing reliable thermal management in tight server environments.
Pros
- Skived aluminum fins for efficient heat dissipation
- Supports LGA1151, LGA1155, and LGA1156 sockets
- PWM fan runs at 3000 RPM
- Compact 80x80x15 mm fan dimensions
Cons
- Low static pressure of 0.52 inch-H2O
- Noise level reaches 38.7 dBA at full speed
- Only 9.0 CFM airflow output
Good fit if
- You are building a 1U server chassis
- You need support for LGA1151 sockets
- You require a low-power cooling solution
Skip if
- You need high static pressure for dense fins
- You require quiet operation under full load
- You are using a standard desktop motherboard
Verdict: Dynatron K6 1U Server Cooler provides essential cooling for 1U server builds with LGA1151 support. It fits users who prioritize compact size and socket compatibility over high airflow or quiet operation.
Walfront 24-Fin Aluminum Heatsink
Best for: LED lighting thermal management
- Material
- Aluminum
- Cooling Method
- Passive
- Compatible Device
- LED light, power transistor
- Dimensions
- 150 x 59 x 25 mm
- Weight
- 5.64 ounces
View on Amazon: Walfront 24-Fin Aluminum Heatsink Affiliate link
This Walfront aluminum heatsink measures 150 by 59 by 25 mm. It features 24 fins to maximize surface area for heat transfer. The unit weighs 5.64 ounces. It is designed for high-power household LED lights or fish LED devices. You should verify that these dimensions match your component size before installation. It offers good thermal conductivity for its intended applications.
Pros
- Aluminum construction for good thermal conductivity
- 24 fins increase surface area for heat transfer
- Compact 150 x 59 x 25 mm size
- Lightweight at 5.64 ounces
Cons
- Not designed for standard CPU sockets
- Limited to LED light applications
- No mounting hardware included in specs
Good fit if
- You need cooling for high-power LED strips
- You are building a fish tank lighting system
- You require a compact aluminum fin block
Skip if
- You need a standard CPU cooler
- You require PWM fan control
- You need heat pipes for higher TDP
Verdict: Walfront 150mm Aluminum Heatsink is a specialized passive cooling solution for LED lighting projects. It suits users who need to dissipate heat from semiconductor devices in aquarium or household lighting setups.
Dynatron 2U Active Aluminum SP3 Heatsink
Best for: AMD EPYC SP3 server cooling
- Socket Compatibility
- Socket SP3
- Material
- Aluminum
- Server Height
- 2U
- Cooling Method
- Active
- Compatible Device
- AMD EPYC
- Dimensions
- 5 × 4.5 × 6 inches
View on Amazon: Dynatron 2U Active Aluminum SP3 Heatsink Affiliate link
The Dynatron A26 is an active aluminum heatsink designed for AMD EPYC processors using Socket SP3. It features embedded heatpipes to move heat away from the CPU. The unit measures 4.5 by 5 by 6 inches and weighs 1 pound. It fits into 2U server chassis. You should choose this if you need reliable cooling for a high-end server platform. It is built for active airflow rather than passive dissipation.
Pros
- Compatible with AMD EPYC Socket SP3
- Uses embedded heatpipes for active cooling
- Fits standard 2U server chassis
- Aluminum construction
Cons
- Requires active airflow from a fan
- Limited to SP3 socket compatibility
- Large physical footprint
Good fit if
- You are building an AMD EPYC server
- You have a 2U chassis available
- You need active cooling for SP3
Skip if
- You use a consumer desktop socket
- You need a passive heatsink
- You have a non-2U case
Verdict: The Dynatron A26 SP3 Heatsink is a specialized cooling solution for AMD EPYC servers. It fits only SP3 platforms in 2U cases. It does not work for desktop PCs.
Easycargo 20-Piece Copper and Aluminum Heatsink Kit
Best for: Raspberry Pi passive cooling kits
- Material
- Aluminum + Copper
- Compatible Device
- Raspberry Pi 5 4 3 boards
- Mounting Type
- Pre-applied adhesive tape backing
- Features
- Thermal Tape
- Dimensions
- 0.55 × 0.55 × 0.28 inches
- Weight
- 0.64 ounces
View on Amazon: Easycargo 20-Piece Copper and Aluminum Heatsink Kit Affiliate link
This kit includes 20 heatsinks made from aluminum and copper. The pads measure 0.55 by 0.28 inches. Each unit comes with pre-applied thermal conductive adhesive tape. You can stick them directly to Raspberry Pi 5, 4, or 3 boards. The total weight is 0.64 ounces. It is designed for cooling VRAM, VGA RAM, and IC chips on single-board computers.
Pros
- Includes 15 aluminum and 5 copper heatsinks
- Pre-applied thermal conductive adhesive tape
- Compatible with Raspberry Pi 5, 4, and 3
- Small size of 0.55 by 0.28 inches
Cons
- Adhesive tape may leave residue
- Passive cooling only
- Raspberry Pi board not included
Good fit if
- You need passive cooling for Raspberry Pi 5, 4, or 3
- You want pre-applied adhesive tape for easy installation
- You need to cool multiple chips on a board
Skip if
- You require active cooling with a fan
- You want a single large heatsink instead of multiple pads
- You are not using a Raspberry Pi board
Verdict: Easycargo Raspberry Pi Heatsink Kit is a practical solution for Raspberry Pi 5, 4, or 3 owners who need passive cooling for multiple components like VRAM and IC chips. It fits users who prefer the convenience of pre-applied adhesive tape.
Specifications side by side
| Spec | Awxlumv 150mm Aluminum Heatsink | Prolimatech Nano Aluminum Thermal Compound 1.5g | Uxcell 100mm Aluminum Heatsink 5-Pack | Dynatron K6 80mm 1U Server Fan | Walfront 24-Fin Aluminum Heatsink | Dynatron 2U Active Aluminum SP3 Heatsink | Easycargo 20-Piece Copper and Aluminum Heatsink Kit |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | not stated | not stated | not stated | LGA1151, LGA1155, LGA1156 | not stated | Socket SP3 | not stated |
| Material | 6063 Aluminum | not stated | Aluminum | Aluminum 6061 Skived Fins | Aluminum | Aluminum | Aluminum + Copper |
| Server Height | not stated | not stated | not stated | 1U | not stated | 2U | not stated |
| Cooling Method | Passive | not stated | not stated | Active PWM Blower | Passive | Active | not stated |
| Compatible Device | LED, CPU, IC, Motherboard, Transistor | not stated | Led Amplifier Transistor IC Module | not stated | LED light, power transistor | AMD EPYC | Raspberry Pi 5 4 3 boards |
| Fan Size | not stated | not stated | not stated | 80 x 80 x 15 mm | not stated | not stated | not stated |
| Dimensions | 60x150x25mm | not stated | 100x25x10mm | 3.15 x 3.15 x 0.59 inches | 150 x 59 x 25 mm | not stated | not stated |
| Mounting Type | not stated | not stated | not stated | not stated | not stated | not stated | Pre-applied adhesive tape backing |
| Features | not stated | not stated | not stated | not stated | not stated | not stated | Thermal Tape |
| Weight | 5.19 ounces | not stated | not stated | 7.84 ounces | 5.64 ounces | 1 pounds | 0.64 ounces |
| Color | Silver | not stated | not stated | not stated | not stated | not stated | Multicolored (20pcs) |
| Model | 60x150x25MM | PK-2 - 1g | a14111400ux0242 | K6 | 8541601958 | A26 | not stated |
Frequently asked questions
Can I use the Awxlumv 150mm heatsink for a desktop CPU?
No. The Awxlumv 150mm Aluminum Heatsink is designed for passive cooling of LEDs and low-power modules. It is not suitable for high-heat CPUs. For desktop processors, you need a dedicated CPU cooler with a fan or a larger thermal solution capable of handling higher wattage loads.
What is the best alternative for AMD EPYC SP3 servers?
The Dynatron 2U Active Aluminum SP3 Heatsink is the best pick for this socket. It is a specialized active cooling solution built for AMD EPYC servers. It fits only SP3 platforms in 2U cases and does not work for standard desktop PCs. It measures 5 by 6 by 4.5 inches.
Does the Dynatron K6 support LGA1151 sockets?
Yes. The Dynatron K6 80mm 1U Server Fan provides essential cooling for 1U server builds with LGA1151 support. It fits users who prioritize compact size and socket compatibility over high airflow or quiet operation. It weighs 7.84 ounces and measures 3.15 by 3.15 by 0.59 inches.
Are there heatsinks suitable for Raspberry Pi passive cooling?
Yes. The Easycargo 20-Piece Copper and Aluminum Heatsink Kit is a practical solution for Raspberry Pi 5, 4, or 3 owners. It provides passive cooling for multiple components like VRAM and IC chips. It includes pre-applied adhesive tape for convenience and weighs only 0.64 ounces.
How does the Uxcell 100mm heatsink differ from the Awxlumv?
The Uxcell 100mm Aluminum Heatsink comes in a 5-pack and is designed for cooling small transistors and LEDs in tight spaces. It does not handle high heat loads like the Awxlumv. The Uxcell unit measures 8 by 4.5 by 1.8 inches, making it a different form factor for smaller components.
Is thermal paste included with the Easycargo heatsink kit?
Yes. The Easycargo kit includes thermal tape as a feature. It is a practical solution for Raspberry Pi owners who need passive cooling for multiple components. The kit contains 20 pieces in multicolored packaging and weighs 0.64 ounces. It is designed for easy application on IC chips and VRAM.
What material are these heatsinks made from?
Most listed heatsinks use aluminum. The Awxlumv, Uxcell, Dynatron K6, Dynatron SP3, and Walfront units are all made of aluminum. The Easycargo kit includes both copper and aluminum pieces. Aluminum is common for passive cooling due to its lightweight nature and adequate thermal conductivity for low-power devices.