6 Best Alternatives to the AMD Wraith Spire Aluminum AM4 (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The AMD Wraith Spire Aluminum AM4 Cooler is a standard stock solution for AM4 processors. It features a simple aluminum heatsink and a 3.81-inch fan with a 4-pin connector. This design offers basic compatibility and ease of installation for users who need reliable, no-frills cooling. However, many builders seek AMD Wraith Spire Socket AM4 4 Pin Connector CPU Cooler alternatives for specific reasons. You might require a smaller footprint for tight cases, more thermal headroom for higher TDP chips, or a different brand preference. Some users also want to avoid the single 92mm fan for quieter operation or better airflow.
The 6 alternatives listed here were chosen because their specifications overlap with the original cooler’s core requirements. Each option supports the AM4 socket, ensuring direct compatibility with your motherboard. The list includes compact low-profile coolers for ITX builds, dual-tower designs for enhanced performance, and single-tower units for quiet operation. By comparing key specs like height, heat pipe count, and fan size, you can find a cooler that matches your case dimensions and thermal needs. These alternatives provide varied approaches to cooling the same socket, allowing you to prioritize size, performance, or noise levels based on your specific build constraints.
How each alternative compares
AMD Wraith Stealth Slim AM4 CPU Cooler
The AMD Wraith Stealth Slim offers a lower profile at 1.97 inches compared to the Spire’s 3.81 inches. This height reduction makes it suitable for cases with tight CPU clearance limits. It retains the aluminum heatsink material and AM4 socket compatibility found in the original. The fan size is listed as 3.93 inches, which is slightly larger than the Spire’s 3.81-inch unit. You gain vertical space savings without changing the socket type. However, the reduced height may limit airflow potential compared to the taller Spire design. This option is best for compact builds where case constraints are the primary concern.
Thermaltake Gravity A2 92mm Top Flow Cooler
The Thermaltake Gravity A2 features a much smaller footprint, measuring 2.36 inches in width versus the Spire’s 3.81 inches. It supports AM4 and AM5 sockets, offering broader socket compatibility than the Spire, which is limited to AM4. The cooler is designed for low-power desktop CPUs and includes a fan for basic dissipation. Its compact size makes it ideal for small form factor desktops. You trade the Spire’s standard height for a significantly narrower and lighter profile. This cooler is suitable for users who need basic cooling for office or light-use systems without the bulk of a standard stock cooler.
Thermalright AXP90 36mm Low-Profile Cooler
The Thermalright AXP90 is a low-profile cooler with a height of only 1.42 inches. This is substantially lower than the AMD Wraith Spire’s 3.81-inch height. It supports AM4, AM5, and multiple Intel sockets, providing wider compatibility than the Spire’s single AM4 support. The design sacrifices cooling power for its slim profile, making it ideal for ITX cases. You gain extreme height clearance but lose the thermal capacity of the taller Spire. The aluminum heatsink and fan configuration remain similar in function. This alternative is best for users with strict height constraints who need a reliable AM4 solution in a small build.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
The Thermalright Dual Tower uses five heat pipes and a dual-tower design, offering significantly higher cooling capacity than the Spire’s single aluminum block. It measures 5.51 inches in height, which is taller than the Spire’s 3.81 inches. This cooler supports AM4 and AM5 sockets, along with several Intel platforms. You gain substantial thermal headroom for high-performance AM4 builds. However, the larger size requires a wide case and sufficient RAM clearance. The dual-tower structure provides better heat dissipation than the simple Spire design. This option is best for users who need strong cooling performance and have the case space to accommodate a larger cooler.
Thermalright Assassin X120 120mm Air Cooler
The Thermalright Assassin X120 features four heat pipes and a 120mm fan, offering better thermal performance than the Spire’s basic aluminum heatsink. It measures 5.83 inches in height, which is taller than the Spire’s 3.81 inches. This cooler supports AM4, AM5, and multiple Intel sockets. You gain improved cooling efficiency and quieter operation through the larger fan size. The aluminum heatsink and fan features are similar in type but superior in execution. This alternative is best for AM4 users who prioritize quiet operation and standard 120mm fan compatibility over the simplicity of a stock cooler.
Thermalright Peerless Assassin 120 ARGB Cooler
The Thermalright Peerless Assassin 120 SE ARGB includes six heat pipes and dual fans, providing robust cooling for AM4 and LGA 1700 systems. It measures 6.1 inches in height, which is significantly taller than the Spire’s 3.81 inches. This cooler supports AM4, AM5, LGA 1851, LGA 1700, and LGA 1200 sockets. You gain substantial thermal headroom for high TDP processors. The dual-fan design and ARGB lighting offer features absent in the basic Spire. This alternative is best for users needing higher thermal performance and broader socket support, provided their case can accommodate the larger height and width.
Quick picks
Our 7 picks
AMD Wraith Spire Aluminum AM4 Cooler
Best for: standard AM4 stock cooling needs
- Socket Compatibility
- AM4
- Fan Size
- 3.81-inch
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 3.81 × 3.81 × 3.81 inches
View on Amazon: AMD Wraith Spire Aluminum AM4 Cooler Affiliate link
The AMD Wraith Spire is a stock cooler designed for AM4 sockets. It uses an aluminum heatsink and a 3.81-inch fan. The unit includes pre-applied thermal paste and a 4-pin connector. It fits standard AM4 motherboards. This cooler suits users who need a basic, low-profile solution for everyday computing tasks without extra bulk.
Pros
- AM4 socket compatibility
- Aluminum heatsink construction
- Pre-applied thermal paste included
- 3.81-inch fan size
Cons
- Single tower aluminum design limits cooling headroom
- Small 3.81-inch fan restricts airflow potential
- No RGB lighting or aesthetic customization
Good fit if
- You need a reliable stock cooler for AM4
- You prefer a low-profile aluminum build
- You want a simple plug-and-play installation
Skip if
- You require high-end cooling performance
- You want RGB lighting effects
- You are using a high-TDP CPU
Verdict: AMD Wraith Spire AM4 Aluminum Cooler is a functional, no-frills option for standard AM4 builds. It fits users who prioritize compatibility and simplicity over advanced cooling capabilities.
AMD Wraith Stealth Slim AM4 CPU Cooler
Best for: tight case clearance and compact builds
- Socket Compatibility
- AM4
- Fan Size
- 90mm
- Material
- Aluminum
- Features
- Fan
- Dimensions
- 1.97 × 4.72 × 4.72 inches
View on Amazon: AMD Wraith Stealth Slim AM4 CPU Cooler Affiliate link
The AMD Wraith Stealth is a slim aluminum cooler designed for AM4 sockets. It features a 90mm fan and direct screw mounting. The unit includes pre-applied thermal paste for easy installation. Its compact height makes it suitable for cases with limited clearance. This cooler is a practical option for users who need a low-profile solution for their AMD processor.
Pros
- Aluminum heatsink with pre-applied thermal paste
- Direct screw mounting for AM4 sockets
- Slim 1.97-inch height for low clearance
- 4-pin PWM fan connector
Cons
- Smaller 90mm fan compared to standard 120mm coolers
- Single tower design with limited surface area
- No RGB lighting or aesthetic customization
Good fit if
- You have a case with tight CPU cooler height clearance
- You are building a compact AM4 system
- You prefer a simple, no-fuss installation
Skip if
- You need high-end cooling performance for heavy workloads
- You want RGB lighting effects
- You have a large ATX case with ample space
Verdict: AMD Wraith Stealth Slim AM4 Cooler is a compact solution for users with tight case constraints. It fits best in small builds where height is the primary limitation.
Thermaltake Gravity A2 92mm Top Flow Cooler
Best for: Low-power desktop CPUs on AM4/AM5
- Socket Compatibility
- AM4, AM5
- Fan Size
- 92mm
- TDP Rating
- 95W
- Fan Speed
- 3500 RPM
- System Type
- Desktop
- Material
- Aluminum
View on Amazon: Thermaltake Gravity A2 92mm Top Flow Cooler Affiliate link
The Thermaltake Gravity A2 is a 95W TDP rated aluminum extrusion cooler designed for desktop systems. It uses a 92mm 7-bladed fan running up to 3500 RPM to move air over the heatsink. The unit measures 60 x 102 x 95 mm and fits AM4 and AM5 sockets. It targets low-power processors where compact cooling is sufficient.
Pros
- 95W TDP rating handles low-power CPUs
- 92mm fan supports up to 3500 RPM
- Aluminum extrusion heatsink for heat dissipation
- Compatible with AM4 and AM5 sockets
Cons
- 92mm fan size limits airflow compared to 120mm or 140mm alternatives
- Single tower design offers less cooling surface area
- No RGB lighting included in this Top Flow variant
Good fit if
- You have a low-power desktop CPU under 95W
- You need an AM4 or AM5 compatible cooler
- You prefer a compact aluminum heatsink design
Skip if
- You run high-TDP processors above 95W
- You require RGB lighting effects
- You need maximum airflow for overclocking
Verdict: The Thermaltake Gravity A2 92mm Aluminum Cooler fits users with low-power desktop CPUs needing basic AM4 or AM5 cooling. It provides adequate dissipation for standard office or light-use builds without excess bulk.
Thermalright AXP90 36mm Low-Profile Cooler
Best for: small ITX cases with AM4 CPUs
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1200, 1851
- Cooler Height
- 36mm
- Heat Pipes
- 4
- Tower Design
- Low-Profile
- Fan Size
- 92mm
- System Type
- ITX
View on Amazon: Thermalright AXP90 36mm Low-Profile Cooler Affiliate link
This low-profile air cooler stands 36mm tall with a 92mm fan. It uses four 6mm heat pipes to move heat away from the CPU. The unit supports AMD AM4 sockets and fits small ITX cases where tall coolers will not fit. It runs quietly at 22.4 dBA. You should choose this if your case has strict height limits.
Pros
- 36mm total height fits tight cases
- Four 6mm heat pipes for heat transfer
- Quiet operation at 22.4 dBA
- Supports AMD AM4 sockets
Cons
- Low-profile design limits cooling capacity
- Smaller 92mm fan restricts airflow
- Heavier than standard tower coolers
Good fit if
- You need a cooler under 40mm tall
- You use an AMD AM4 processor
- You build in an ITX case
Skip if
- You need maximum cooling performance
- You have a full-tower case
- You use a high-TDP CPU
Verdict: Thermalright AXP90 X36 Low Profile Cooler fits small ITX builds with AMD AM4 CPUs. It sacrifices cooling power for a 36mm height.
Thermalright Dual Tower 5-Heatpipe CPU Cooler
Best for: High-performance AM4 cooling in wide cases
- Socket Compatibility
- AM4, AM5, LGA1150, LGA1200, LGA1700
- Cooler Height
- 160 mm
- Heat Pipes
- 5
- Tower Design
- Dual-Tower
- Fan Size
- 120 mm, 140 mm
- TDP Rating
- 275 W
View on Amazon: Thermalright Dual Tower 5-Heatpipe CPU Cooler Affiliate link
The Thermalright FC140 is a dual-tower air cooler with five 8mm heat pipes and a 275W TDP rating. It includes a 140mm and a 120mm PWM fan, reaching speeds up to 1850 RPM. The aluminum heatsink stands 160mm tall, requiring a case width over 210mm. It fits AM4 sockets and supports RAM up to 62mm in height.
Pros
- Dual-tower design with five 8mm heat pipes
- 275W TDP rating for high-end CPUs
- Includes 140mm and 120mm PWM fans
- Compatible with AM4 and modern Intel sockets
Cons
- 160mm height requires a case width greater than 210mm
- Aluminum heatsink material limits heat dissipation compared to copper
- RAM clearance is limited to 62mm height
Good fit if
- You need high cooling performance for an AM4 processor
- You have a mid-tower or full-tower case with sufficient width
- You use low-profile RAM modules under 62mm
Skip if
- You have a compact case with a width under 210mm
- You use tall RAM sticks exceeding 62mm in height
- You prefer a single-tower design for easier installation
Verdict: The Thermalright FC140 Dual Tower 5 Heat Pipe offers strong cooling capacity for AM4 builds, provided your case is wide enough and your RAM fits the clearance limit.
Thermalright Assassin X120 120mm Air Cooler
Best for: AM4 users seeking quiet 120mm cooling
- Socket Compatibility
- AM4, AM5, LGA1700, LGA1851, LGA1200
- Cooler Height
- 148 mm
- Heat Pipes
- 4
- Fan Size
- 120 mm
- Fan Speed
- 1550 RPM
- Material
- Aluminum
View on Amazon: Thermalright Assassin X120 120mm Air Cooler Affiliate link
This 120mm air cooler uses four 6mm heat pipes and an AGHP design to manage heat effectively. It includes a 120mm PWM fan that runs up to 1550 RPM with low noise. The aluminum heatsink fits AM4, AM5, and Intel LGA sockets. Its 148mm height suits medium cases. It offers a practical upgrade over basic aluminum coolers like the Wraith Spire.
Pros
- Four 6mm heat pipes with AGHP technology
- 120mm PWM fan up to 1550 RPM
- Compatible with AM4, AM5, and Intel sockets
- Low noise level of 25.6 dB
Cons
- Aluminum heatsink limits heat dissipation compared to copper
- 148mm height may not fit small cases
- No RGB lighting on the base model
Good fit if
- You need a quiet 120mm cooler for AM4
- You have a medium-sized computer case
- You want reliable heat pipe performance
Skip if
- You require a low-profile cooler under 100mm
- You need RGB lighting effects
- You want a dual-tower design
Verdict: Thermalright Assassin X120 Refined SE provides solid cooling for AM4 and AM5 users who prioritize quiet operation and standard 120mm fan compatibility over premium materials.
Thermalright Peerless Assassin 120 ARGB Cooler
Best for: AM4 and LGA 1700 high TDP cooling
- Socket Compatibility
- AM4, AM5, LGA1700, 115X, 1851, 1200
- Cooler Height
- 155mm
- Heat Pipes
- 6
- Tower Design
- Double tower
- Fan Size
- 120mm
- TDP Rating
- 120 to 245W
View on Amazon: Thermalright Peerless Assassin 120 ARGB Cooler Affiliate link
This dual-tower air cooler features six 6mm heat pipes and two 120mm PWM fans. It supports AM4 and LGA 1700 sockets with included mounting hardware. The aluminum fins and copper base handle TDP ratings up to 245W. ARGB lighting adds visual detail. It fits well if you need strong cooling performance for modern processors on compatible platforms.
Pros
- Six 6mm pure copper heat pipes with AGHP technology
- Dual 120mm PWM fans with 66.17 CFM airflow
- Supports AM4, AM5, and LGA 1700 sockets
- ARGB lighting effects on fans
Cons
- Height reaches 155mm, which may limit RAM clearance
- Aluminum heatsink material limits heat dissipation compared to all-copper designs
- ARGB lighting requires motherboard header connection
Good fit if
- You use an AM4 or LGA 1700 processor
- You need cooling for high TDP CPUs up to 245W
- You want dual-tower performance in a standard 120mm fan form factor
Skip if
- You have low-profile cases under 155mm height
- You require silent operation below 25.6 dB noise level
- You prefer a single-tower design for easier installation
Verdict: Thermalright Peerless Assassin 120 SE ARGB delivers robust cooling for AM4 and LGA 1700 systems through its six heat pipes and dual fans, making it a solid upgrade over basic aluminum coolers for users needing higher thermal headroom.
Specifications side by side
| Spec | AMD Wraith Spire Aluminum AM4 Cooler | AMD Wraith Stealth Slim AM4 CPU Cooler | Thermaltake Gravity A2 92mm Top Flow Cooler | Thermalright AXP90 36mm Low-Profile Cooler | Thermalright Dual Tower 5-Heatpipe CPU Cooler | Thermalright Assassin X120 120mm Air Cooler | Thermalright Peerless Assassin 120 ARGB Cooler |
|---|---|---|---|---|---|---|---|
| Socket Compatibility | AM4 | AM4 | AM4, AM5 | AM4, AM5, LGA1700, 115X, 1200, 1851 | AM4, AM5, LGA1150, LGA1200, LGA1700 | AM4, AM5, LGA1700, LGA1851, LGA1200 | AM4, AM5, LGA1700, 115X, 1851, 1200 |
| Cooler Height | not stated | not stated | not stated | 36mm | 160 mm | 148 mm | 155mm |
| Heat Pipes | not stated | not stated | not stated | 4 | 5 | 4 | 6 |
| Tower Design | not stated | not stated | not stated | Low-Profile | Dual-Tower | not stated | Double tower |
| Fan Size | 3.81-inch | 90mm | 92mm | 92mm | 120 mm, 140 mm | 120 mm | 120mm |
| TDP Rating | not stated | not stated | 95W | not stated | 275 W | not stated | 120 to 245W |
| Fan Speed | not stated | not stated | 3500 RPM | not stated | 1850 RPM | 1550 RPM | 1500rpm±10% |
| Lighting | not stated | not stated | not stated | not stated | not stated | not stated | ARGB |
| System Type | not stated | not stated | Desktop | ITX | not stated | not stated | not stated |
| Color | not stated | Black | Top Flow | Black | Black | not stated | PA120 SE ARGB 1700 |
| Material | Aluminum | Aluminum | Aluminum | not stated | Aluminum | Aluminum | Aluminum |
| Features | Fan | Fan | Fan | Fan | Fan | Fan | Fan |
| Dimensions | 3.81 × 3.81 × 3.81 inches | 1.97 × 4.72 × 4.72 inches | 4.02 × 2.36 × 3.74 inches | 3.72 × 3.74 × 1.42 inches | 6.3 × 5.75 × 5.51 inches | 4.72 × 2.8 × 5.83 inches | 4.92 × 5.31 × 6.1 inches |
| Weight | not stated | not stated | 1 pounds | 15.8 ounces | 2.2 pounds | 1.42 pounds | 2 pounds |
| Model | 712-000074 REV A | 712-000052 | CL-P078-AL09WT-A | AXP-90 X36 Black | FC140 BLACK | AX120 Refined SE | PA120 SE ARGB 1700-D2 |
| Size | not stated | 3.93 Inch | AM4 | Height 36mm | 5 Heat Pipes | not stated | 6 Heat Pipe |
If you need board specs, you can compare asus amd b550 socket am4 compatible motherboard alternatives for socket layout.
Frequently asked questions
Is the AMD Wraith Stealth Slim compatible with AM4?
Yes, it is fully compatible with the AM4 socket. This cooler is designed for users needing a compact solution with tight case clearance. It features a slim 1.97-inch height to fit small builds while maintaining standard aluminum construction and fan operation.
Does the Thermalright AXP90 support AM4 sockets?
Yes, the Thermalright AXP90 supports the AM4 socket. It is a low-profile cooler with a 36mm height, ideal for small ITX cases. The unit also supports AM5, LGA 1851, LGA 1200, LGA 1150, and LGA 1151 sockets for broader compatibility.
What is the height of the Thermaltake Gravity A2?
The Thermaltake Gravity A2 has a height of 3.74 inches. This top-flow design is suitable for low-power desktop CPUs on AM4 and AM5 sockets. It provides adequate cooling without excessive bulk, making it a practical choice for standard office builds.
How many heat pipes does the Thermalright FC140 have?
The Thermalright FC140 features five heat pipes. This dual-tower design offers strong cooling capacity for high-performance AM4 builds. It requires a wide case for installation, as the unit measures 5.51 inches in height and 6.3 inches in length.
Does the Thermalright Assassin X120 include ARGB lighting?
No, the listed Thermalright Assassin X120 Refined SE does not include ARGB lighting. It focuses on quiet operation with a 120mm fan and four heat pipes. It supports AM4 and AM5 sockets, prioritizing performance over aesthetic lighting features.
Is the Thermalright Peerless Assassin compatible with AM4?
Yes, the Thermalright Peerless Assassin 120 SE is compatible with AM4. It uses six heat pipes and dual fans for robust cooling. This model also supports LGA 1700, LGA 1851, AM5, and LGA 1200, making it versatile for various high-TDP systems.
Can the Thermaltake Gravity A2 fit on an AM5 socket?
Yes, the Thermaltake Gravity A2 supports the AM5 socket. It is an aluminum cooler with a fan, designed for low-power desktop CPUs. Its dimensions of 2.36 inches in width and 4.02 inches in length allow it to fit in various standard desktop configurations.